Thermal Cut-Off with High Limit Thermostat Specifications
The thermal cut-off (fuse) is meant to trip at a higher temperature than that of a high limit thermostat. This is a one time use fuse, so when it does trip, you must replace it. The hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this piece will shut down power to the heating element.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not Heating | Too hot
This part works with the following products:
Dryer.
This part works with the following products:
Whirlpool, Maytag, Kenmore, Kenmore.
Part# 280148 replaces these:
AP3874047, 1175772, 280148, 280148VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
4.2
Filter By Rating:
5 Stars
4
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
1
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Garry M - February 22, 2020
Verified Purchase
Dryer Fix
Received really fast easy to install they were the right parts
★★★★★
★★★★★
Tony O - August 20, 2021
Verified Purchase
Great part and delivered right
I received the ordered part and it worked well for my device. That saved me a tons from calling a tech. Thanks
★★★★★
★★★★★
Yan C - May 2, 2020
Verified Purchase
Facile
Marche très bien
★★★★★
★★★★★
Jean-Pierre F - February 20, 2019
Verified Purchase
Quickest effective repair ever
The part was new and very simple to install and my dryer now performs like new again.
★★★★★
★★★★★
Samuel S - September 4, 2018
Verified Purchase
Horrible experience
I ordered the part it took two weeks to show up, than when it did it wasn’t even the right part I ordered. I called to customer service, and still didn’t get a refund or my actual part.
September 5, 2018
Hello, Thank you for leaving a review on the part ordered. Checking the order I am showing you have already contacted us to address the issue and refund was applied on 08/22/18. Please let us know if there is anything else we can assist you with.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.6 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No heat in the dryer
Went to Kenmore website, got parts diagram, watched You Tube videos on dryer repair for this model, ordered parts. When parts arrived (in 4 days, great job!), re-watched You Tube videos, installed parts, dryer works great. Took longer than industry standards because I had to suction out/vacuum a great deal of lint/hair. as I went along.
Replaced high limit thermostat and thermal cutoff. Dryer works like a champ. Reviewed couple of YouTube videos that showed clearly how to get to the effected parts, test them and replace them. I had an old front loading dryer once before that I repaired a couple of times but these parts were accessible by removing a panel on the rear of the unit. The procedure was more involved with this unit. After studying the videos and getting a feel for what was involved, the process, while involved, was fairly simple and putting the unit back together was also fairly easy. Replacement parts did the trick. Very happy.
Thought I could do it myself. Bought most parts recommended by this site Took backoff thinking I could get to heating element. Noticed I would have to take out drum. Being in my 90's, decided to call repairman. He came and replaced the heating element I had purchased. He didn't have to come back after he had purchased parts. That saved about half my bill. Worked Great!
The first thing I did was to watch the video from Part select on How to change thermostat cut off switch and the high limit thermostat fuse.I did not have a meter reader I just brought the thermostat cut off kit for about $ 32.00 dollars from part select and replace both part's and my dryer still was not getting hot so back to part select video's I looked up the video on replacing the heater element and I ordered one for about $ 97.00 with shipping I replaced it and put it back together and it worked it took just a few hours . I would like to give Avery special thank to part select for the video help and for having the parts for a great price again thank you so much.
Other Parts Used:
Ronnical from Napanoch, NY
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Deanna
July 24, 2017
I have replaced the thermal fuse & thermistor that are located next to the blower & also the exhaust & checked inside the dryer for lint build up. Our dryer will run now but it gets extremely hot & the clothes will be too hot to touch at the end of the cycle. With the bottom panel off, the element turns red & then will be black (back & forth) so i assume it is working. Not sure if you think i need a thermal cutoff (280148) or thermostat (8557403). Any advice would be appreciated. Trying to get this fixed myself... thanks!!!
For model number WED9200SQ0
Hi DeAnna,
Thank you for the great question,checking the symptoms and with the parts you already replaced they suggest trying the Thermal Cut-Off with High Limit Thermostat part number PS991443. The thermal cut-off (fuse) is meant to trip at a higher temperature than that of a high limit thermostat. This is a one time use fuse, so when it does trip, you must replace it.
Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Sam
October 31, 2019
Hi, my dryer is producing no heat. Lint trap is clean. Dryer thermal fuse ps11741460 has .7 ohms resistance. Internal bias thermostat ps11746740 is 11.78 kilo ohms. Thermostat ps11746386 is 11 ohms, and thermal cut-off with high limit thermostat is 7.9 ohms and 0 ohms. Any recommendations? All done at room temp.
For model number YWED9400SW0
Hello Same, Thank you for the question. I suggest testing the element, PartSelect Number PS11746337. The ideal reading for a tumble dryer element is between 20 and 50 ohms - so any reading significantly outside of this range means the element is faulty and needs to be replaced. Hope this helps!
Where does this part attach to my appliance. I have been told it is on top, after i remove the main metal plate cover. I am hoping that is it, because if not I'm going to have to buy the entire board, because i have replaced everything, but this part so far in regards to temp.
For model number WED9600TA1
Hi Candie, Thank you for the question. These parts attach to the heating element housing. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
September 26, 2019
The clothes are extremely hot at end of cycle and so is top of dryer. I also get an af code. All vents are lint free . It’s moving a lot of air when i checked outside.Thermastat ?..
For model number WED7800XW0
Good Day John. Thank you for your question in regards to your unit (Model Number WED7800XW0). Based on our research you may need to replace one or more of the following parts: 1) Thermostat, Internal-Bias (PartSelect Number PS11746740). 2) Moisture Sensor (PartSelect Number PS11741408). 3) Heater Element - 240V (PartSelect Number PS11746337). 4) Disposable Thermal Fuse - Two Terminal (PartSelect Number PS11741444). You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
Was this helpful?
Thank you for voting!
David
December 23, 2019
How do i replace the thermal cut-off?
For model number WED7300XW0
Hello David and thank you for writing.
For your convenience, we have attached the link to our repair video. We hope this helps. Good luck with your repair
https://www.youtube.com/watch?v=ioyEkXiyXYQ
Was this helpful?
Thank you for voting!
Armando
December 5, 2021
My dryer don’t start when I push the button of start only makes a noise but don’t spin. Thanks.
For model number WED5610XW0
Hello Armando, Thank you for the question. If the appliance motor is running but the drum is not spinning, we suggest checking the Drum Belt. The Belt wraps around the dryer drum to allow tension and movement. We hope this helps!
My gas dryer won't turn 9n, says door open, and has code E66. Do I replace the Thermo Limiter, or the Thermostat fuse?
For model number LAQG7000LW0
Hello Bob, Thank you for your inquiry. This code usually indicates that the thermal limiter has tripped and needs to be replaced. You can test the thermal fuses with a multimeter to see which one is causing the issue, and also check for any obstructions to the vent that could be causing the dryer to overheat. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. With your multi-meter set to Rx1, touch the probes to each terminal, you are testing for continuity and should have a reading of zero or infinity. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Dryer won't start due to a shoe that got stuck in the drum while it was working. So i assumed it was because it got stuck so the dryer stopped automatically and it tripped that fuse if am correct. Would you able to tell me where i can find that fuse and how to get to it.Thank you
For model number WED7300XW0
Hello Joel,
Thank you for your question. The fuse for your model is under part PS11741444 for your model and it is located near the exhaust duct of the dryer. We hope this helps.
Dryer won’t turn on . Has power sensing light is on and start button blinking.Door button is by passed...?.
For model number Wed7800xwo
Hello John and thanks for writing.
There are several items that could cause that symptom.
The Thermal Fuse # PS11741444
The internal Bial Thermostat # PS11746740 also check your door catch to make sure.
We hope this helps. Please contact us anytime.
This part is a one-time use thermal fuse which attaches to the blower wheel housing of your clothes dryer. It cannot be re-set and must be replaced when there is no longer continuity between the pins. Terminal size is 3/...
The dryer heating element generates the heat required for drying clothes. Constructed with a nickel-chrome coil, it resists electricity to produce heat. If the dryer no longer heats, inspect the thermal fuse before repla...
This thermostat may differ in appearance, but functions the same as the original part. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
This authentic OEM high limit thermostat is made for your dryer. It is an important dyer element, because it will automatically shut off the heating element when it overheats. Be sure to disconnect the power to your drye...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
