This dishwasher latch strike is a manufacturer-approved replacement part for your appliance. The latch strike is an important component in your dishwasher door assembly, and adds an extra layer of security in keeping the door closed. This part may become damaged if the door has been opened during a wash cycle. It can also wear out over time. It is fairly easy to replace, simply pop out the old door strike using a screwdriver for leverage, and insert the new one.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Door latch failure | Door won’t close
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint, Haier.
Part# WD13X10071 replaces these:
AP5781915
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Arthur D - August 20, 2020
Verified Purchase
Works great
Fast shipments, parts as per the original one. I even bought a wrong part and they refund me as if I would have bought from amazon
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.9 / 5.0, 6 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
dishwasher would not start
I watched a step by step video provided on the Fix It app. Easy to follow directions and only took minutes to tear apart and put back together. Didn't even require help from my husband. Although the latch and striker were not the problem, contacted parts select and they then recommended the electronic control board, they ordered it, had it shipped to me within a few days, another really easy fix I did using the You tube video. Fixed the problem lickety-split. I will never go without my fix it app. Entered all my appliances. Sure beats spending hundreds on appliance repairmen! Thank you Parts Select!
Doesn't complete dry cycle, no clean light, random noises as if door was closing
Removed toe kick. Removed door counter weights and placed door on soft surface. Removed two bolts(I was able to leave hinges in place) slid door panel down and off. Removed plastic snap fit cover and 4 bolts from UI board. Two of the stand-offs where broken, glued them back into place. Ensured jumpers were set to my model, snapped cover back in place and remounted door. The dishwasher now runs through the cycle and clean light but did not dry. That turned out to be a bad flood switch.
Nightmare!!! The Striker latch did not pop out with a screwdriver as it was supposed to. The whole dishwasher needs to be disconnected and pulled out, then front door removed and totally disassembled to remove the screw to replace the striker latch. lots of work to replace a striker latch. Bad design!
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
6 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken latch
My son did the repair, I ordered both latch and striker, only needed the latch...only took him a few minutes to remove the old and install the new and works just fine
My Dishwasher goit damages from broken glass jam pump and clogged drain
Work done" used wet vacuum to remove all water and debris from inside out side dishwasher, used we vacuum to unclog drain, Disconnected drain hose, unplug power cord, water supply line, removed dishwasher, swap all new parts, reconnected everything and done in a zap,
Parts diagram shows Striker can be popped out with screwdriver. Not true. It has a screw bolting it internally. Impossible to get to unless you disassemble the entire door. We took a power drill and small drill bit and bore it out like a cavity in a tooth. Needle nose pliers to extract the screw. Pretend your a dentist. Fixed it in 5 minutes. Replacement fit tight. A+
Other Parts Used:
Lesa from BETHALTO, IL
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
August 8, 2017
Does this part just snap in place and how do you remove the broken one? Thanks
Hi Steve,
Thank you for your inquiry. This part should just be able to be popped off your appliance and then popped back into place. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
January 27, 2022
Hello,
The dishwasher intermittently beeps every hour or so and the light go on. It's closed and I've reset the breaker. Waiting to see if it resolves the problem but I saw something that mentioned it might suspect the door being opened and if so, a new door latch would be needed. Can this be done by a layman and would you be able to direct me to the specific part as I didn't see it on the model inventory. Thank you.
For model number GE GDT635HSJ2SS Dishwasher Model
Hi Mark,
Thank you for your question. The part number listed under your model number for the door latch is PS6447681. If you would like to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Replacing the door latch is a repair that you can do yourself. We have included a link to one of our YouTube videos that you may reference on how to install the door latch. The dishwasher in the video may appear different from yours, but it will give you a general idea on how to install the part. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Hello Roger, thank you for contacting us. We would recommend checking the fuse which is a part of the wire harness assembly, part number PS11762972. Please make sure the fuse is not blown. The issue can also be related to a faulty door latch, part number PS6447681. If this does not help, the issue is most likely because of a faulty UI control board, part number PS16762510, and/or the main electronic control board, part number PS16729164. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
No lights on selection panel when door is open. Had been running fine on prior daily usage.
For model number Pdt845ssj2ss
Hi Ronald, thank you for reaching out. Based on our understanding of the issue, we would suggest you check the door latch, part number PS6447681, for any faulty switches. If that is not causing the issue, then you may need to check the main control board, part number PS12726420. We hope this helps!
Dishwasher won’t start flashing light on door lock
For model number Gdt655smjoes
Hello Jerry, thank you for reaching out. Try pressing the start or reset pad to reset the dishwasher and wait 2 minutes. If the problem persists, then you may need to check the door latch, part number PS6447681, to fix the issue. The door latch is attached to the tub frame and connects to the door strike to keep your dishwasher door closed during operation. If you have a broken or faulty door latch, your dishwasher door may not stay closed, and this can prevent the dishwasher from running. We hope this sorts out your problem!
My dishwasher was running fine. randomly it started where i would press the start button and it would beep 3 times and never start. I unplugged it and it worked fine again. The next time it did it, which was about 2 weeks later, i tried resetting it again. This time it did not work. The dishwasher comes on, the lights come on, I hit start and it will sound like it’s going to start then it will make the 3 beep noise it makes when the door is left open.
For model number GDF520PGJ2BB
Hello Bailee, thank you for the question. Based on the description you have provided, we would recommend checking the door latch, part number PS6447681, to fix the issue. We hope this helps!
This is replacement door latch for your dishwasher. The door latch is attached to the tub frame, and connects to the door strike to keep your dishwasher door closed during operation. If you have a broken or faulty door l...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
