Average Repair Rating: 3.3 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water leaking into Freezer from Ice Maker
Disregard previous. 1. Turn off water supply. 2. Unplug power cord. 3. Remove bottom Panel to access the Solenoid valve. 4. Remove the water lines from the Valve. 5. Remove the Valve from the refrigerator. 6. Remove the electrical connectors from the valve. (make sure the new valve has the connector adaptors included) you will need them during installation. 7.Bend the new valve bracket inward about 45 degrees to clear the compressor coolant line. 8.Use a pair of pliers to braek away the plastic on the new valve for clearance. 9.If needed remove the compression fitings from the old water line installation as the new valve comes with the push and lock feature. 10.Install the bottom 2 water lines they are different sizes 11.Mount the new valve to refrigerator and tighten. 12.Install the ice maker water line to the top fitting on the valve. 13.Plug the power cord in & turn on the water supply,check for leaks and proper operation on the valve.
water lines to ice maker and door dispenser replacement
replacing the lines was easy, problem was the drawing on line and the parts list did not show two different size tubing used. had to run out for the 5/16 inche tubing for the water dispenser in the door. got the 1/4 inch tube done in 5 minutes.
The inlet valve on my Frig had compression fittings, very easy to use. The part I recieved was threaded, very difficult to find the correct fitting for water line hose 3/8 on inlet side 5/8 on hose side. In the end, I cleaned up old valve, bought a new braided line for house service to frig and the leak has stopped. Not sure if cleaning valve or new line fixed issue but no leaks. Company shipped part as directed with no issues. Thanks, Dave
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
August 19, 2019
Water is leaking from tube to the ice maker. Have new tube, how do you disconnect old tube from the single outlet valve and connect the new hose?
For model number GTS18WCMDRCC
Hello John, Thank you for the question. You should be able to pull the tube from the valve coupler. Hope this helps!
Was this helpful?
Thank you for voting!
Alistair
August 10, 2021
I am not able to pull the old tube out of the connector at the back of the freezer. Do I buy a connector for this pet and cut the old tube a bit below the connector to attach? Do I need to also replace the connector that goes in the back of the freezer?
For model number PTS22SHSARSS
Hello Alistair, Thank you for the question. The connector and the tube are sold as one piece and need to be replaced together, PartSelect Number PS895283. We hope this helps!
There is water that freezes in the bottom of the freezer then leaks onto the floor…. I do have the ice maker but never installed it. Did this unit require it?
It also appears that the seal around the bottom freezer has gaps on one side. Checked and the unit is level. Thanks for any help.
For model number GLE12HSPARSS
Hi Beth, thank you for reaching out. You can install the ice maker according to your requirement. The freezing issue can occur because of a faulty freezer gasket. The bottom freezer gasket for your model is part number PS12577775. You may need to replace it to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Jen
February 28, 2018
Does this hose supply water to the ice maker? The one on my frig is clear/ white/ opaque...the one in this picture looks black. mine is 1/4 in...seems like it should do the trick, right?
For model number TPS24BPD-BS
Hello Jen, thank you for your question. Even though the color of the tube is different this is the OEM replacement part for the Ice Maker Water Line part number WR17X11349 . This is the water line that takes water from the valve to the icemaker itself. I hope this helps!
This valve comes with 1/4" compression inlet.
NOTE: This part comes with new quick connections. To install - cut retaining nuts off of existing plastic water lines and gently push them into new valve. To remove - depre...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS758904
Manufacturer Part Number: WR17X11349
