This part helps your oven broil food by heating from the top. If your oven isn’t getting hot enough, broiling unevenly, or the element looks burnt or broken, this replacement can help. It fits many Frigidaire, Kenmore, and Electrolux models. Be sure to unplug your oven or turn off the breaker before installing.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Range Broil Element
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Little to no heat when broiling | Little to no heat when baking
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Les B - June 25, 2020
Verified Purchase
EASY REPAIR
PART WAS IN GREAT CONDITION WHEN RECEIVED EASY TO PUT IN WORKS FINE THANKS
★★★★★
★★★★★
Sandra S - April 25, 2020
Verified Purchase
Element
Very happy with your service, thank you!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broiler element would not work
First my husband cut off the circuit breaker. He then removed the two screws that held the element in place and pulled the element out about 3 inches and disconnected the two wires. The rest was easy. We were impressed at how fast the element was sent. We were told about 5 days to 7 days. The element arrived on the second day. Very please with the service and the product.
Other Parts Used:
Frances from Paris, TN
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
43 of 53 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Watch the video on line and it was really that easy to replaced the elements
Went very well and it works!
Other Parts Used:
Joseph from HATBORO, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broiler element fried, found nothing in town, Part Select delivered in three days
Pulled oven out, took the screws out of back plate cover plate with socket wrench, pulled connectors out through the back, removed the door, pushed the element rods through the two holes, connected the two wires, screwed the element in, put the hangars on for the element, put the back plate on and turned the broiler on, worked great, put the range door back on and has been working great. Great company, hope not to use them again, but good to know they are there with my part. Gary H.
Other Parts Used:
Gary from TULSA, OK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
NO HEAT IN UPPER ELEMENT
NEED A QUARTER INCH SOCKET FOR THE BOLTS. REMOVE THE BACK PANEL AND THEN YOU WILL SEE THE TWO ELECTRIC WIRES GOING TO THE TERMINALS OF THE ELEMENT. DISCONNECT AND THEN GO TO THE FRONT OF OVEN AND REMOVE THE FOUR BOLTS THAT HOLD IN THE TOP ELEMENT. SIMPLY, VERY SLOWLY PULL THE ELEMENT FORWARD UNTILL IT CLEARS THE BACK AND YOUR GOOD TO GO. DO NOT FORGET TO DISCONNECT THE POWER TO THE OVEN BEFORE YOU START!
Other Parts Used:
Jerome from WOOD LAKE, MN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Grace Flood
November 7, 2018
What causes cakes to not cook evenly and burn
For model number Fgef3032mfh
Hello Grace, Thank you for the question. I suggest testing the Oven Probe, PartSelect Number PS11731755. The probe helps regulate the temperature. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Thank you for your inquiry, good luck with this repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
JOE
February 22, 2019
How do you test the broiler element, to see if it good/bad
Hello Joe, Thank you for the question. You can test the element with a Multi Meter. When testing it should show closed for continuity. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bob
May 13, 2019
When I use broil the element works fine. When i use bake the oven takes an hour to get to 350
Hello Bob, Thank you for the question. I suggest testing the Oven Sensor. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jason
February 6, 2020
Oven takes a long time to heat up and won't broil. My model number is close to the options listed but one digit off. It my be an older model as i purchased it approximately three years ago.
For model number 79095053313
Hi Jason. It is likely a bad element or temp sensor. The compatible parts are linked below. Thank you for your question and good luck with your repair.
Is the Frigidaire part #316203301 the correct broil element for my Kenmore range, as identified by the model # above?
For model number 79097459802
Hello John, thank you for getting in touch. Yes, this broil element will fit your model. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Genevieve
August 15, 2019
My oven turns on but still hasn't reached the 350 degree temp after 3 hours of preheating. My broiler element does not come on, is that the likely issue?
For model number Kenmore 790.94203311
Hi Genevieve, only a certified technician can tell you for certain however more than likely the broil element has to be replaced. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Harry
December 16, 2022
My oven has an element at the top and bottom and the bottom is the one burnt out. Will this element replace the bottom too?
For model number 79095423300
Hello Harry, thank you for your question. No, the bake and broil elements are not interchangeable. The correct Bake Element on the bottom is part PS439617. We look forward to hearing from you.
I have a house built in 2014 that came with a Frigidaire oven FGEF3032MFH. Recently when I turn on the bake function to a temp of 325 or higher it trips the breaker. Is this a sign the heating element should be replaced?
For model number FGEF3032MFH
Hello Darren, thank you for contacting us. Based on the description that you have provided, we would recommend checking the bake element, part number PS1991807, to fix the issue. We hope this solves your problem!
My broil element will not heat up. I have replaced the element and the switch infinite parts that you said would fix it and it still is not working. Is there anything else that we can check? Could the element be bad?
For model number LFEF3016NWB
Hello Traci, thank you for reaching out. We recommend that you check the broil element, part number PS439673, the temperature sensor, part number PS1528542, and the control board, part number PS5136200, and replace the defective part to resolve the issue. If you require assistance to place an order, please contact customer service. We hope that helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Element or Burner","title":"Element or Burner","url":"/Range-Elements-and-Burners.htm"},{"position":2,"name":"316203301","title":"316203301","url":""}]
