Part Location Diagram of 316490000 Frigidaire Temperature Sensor
See part F37 in the diagram
Replacing your Frigidaire Range Temperature Sensor
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Temperature Sensor

★★★★★
★★★★★
33 Reviews
$65.85
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS1528542
Manufacturer Part Number 316490000
Manufactured by Frigidaire
Product Description

Temperature Sensor Specifications

This temperature sensor detects the temperature within the oven cavity.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Frigidaire Range Temperature Sensor

Replacing your Frigidaire Range Temperature Sensor
Troubleshooting
This part fixes the following symptoms:
Oven is too hot | Little to no heat when baking | Oven not heating evenly | Element will not heat
This part works with the following products:
Range, Wall Oven.
This part works with the following products:
Frigidaire, Kenmore, Electrolux, Crosley.
Part# 316490000 replaces these:
AP3963654, 1197392, 316490002, 316490003, 7316490000
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
33 Reviews
4.7
Filter By Rating:
  • 5 Stars
    26
  • 4 Stars
    5
  • 3 Stars
    1
  • 2 Stars
    1
  • 1 Star
    0
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 25 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
oven temp not consistent with setting
took off back cover and unplugged old unit and installed new unit. oven probe was not the issue. probally control panel malfunction of readings. will continue using oven temperatue gauge inside to get settings for temperture as temp is important for baking.
Other Parts Used:
  • john from spring, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
69 of 151 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven did not heat up
Replaced the probe because that's what this site recommended.The oven still does not heat up.
Other Parts Used:
  • Tim from ASHAWAY, RI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
68 of 104 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
trouble code F10 low oven temperature, oven not overheating,low resistance reading on ohm meter
Turned off electric,removed rear panel and replaced part.oven is now operating good as new.
Other Parts Used:
  • Michael J from STATEN ISLAND, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
18 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Range would start beeping and needed to be unplugged.
Remove 4 screws on back panel. Unclip wire connector and remove probe and install new probe.
Other Parts Used:
  • George from TURNERSVILLE, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
15 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven would not heat up error code F10 showing on veiw screen
move the range out and unplug power supply, removing the back cover allows access to the probe, this can be done with screw driver or nut driver, loosen clamp that holds power cord in place and move backing out of the way, be careful sheet metal can be sharp, locate the probe unplug the connector and remove screw holding probe, pull old probe out install new probe, fasten down and plug in connector. attach backing and tighten clamp on power cord, plug in to power supply, turn on oven and give it several minutes for probe to work, it took only 20 minutes to replace the bad probe and the oven works like new hop this helps
Other Parts Used:
  • Jess from DEWEY, OK
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
14 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
OVEN WOULD NOT HEAT UP OVER 100 DEGREES
I "You Tubed" disassembly and commenced by disconnecting electric power. Removed door via You Tube instruction, removed back panels of unit, and replaced the oven temp probe. Easy Peasy. Then removed bottom of oven, next level above the burner and started to remove the igniter. One nut refused to be removed so I removed the burner and cut the nut and drilled it out. I reinstalled the new igniter with a metal screw from the rear panel and reinstalled the burner. Through the tiny hatchway I reconnected the new igniter and reassembled the oven to test. Just fine heated to 350 in 7 minutes. Awesome. Then, I called my brother, Pat, to give his imprimatur to the hillbilly nut switch. He said ok, I am done.

To any reading this, I would order the igniter and the burner at the same time. That tough nut cost my one extra hour.
Other Parts Used:
Oven Bake Igniter
  • Lawrence from LIVINGSTON, NJ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven temperature ran very high
When the part arrived, I open the box. Cut off my breaker to the range. Pulled back the stove and unscrewed the back. Located the probe, unscrewed the one screw that held it in. I then unclamped the white connectors, remove the old probe, replaced it with the new one reclamped the connectors. Screwed it back into the range. Replaced the back and screwed that back together. It was so easy I was very proud of my self. I cut the breaker back on and cooked a can of biscuits just to see if it really worked. And it did. My bread was not burned, it was cooked to perfection.
Other Parts Used:
Light Bulb
  • Juliette from BRINKLEY, AR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Range not heating properly
The youtube video clearly described how to remove the back panel and how to replace the probe.
The repair took maybe 20 minutes to complete and 1/2 of that time was spent cleaning behind and underneath the range!
Range is working perfectly now!
Other Parts Used:
  • Eloisa from SPOKANE VLY, WA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My five-year-old Frigidaire Gas stove was giving an F 10 code.
I looked up the problem on YouTube and it said it was the oven temperature probe was going out. So I ordered the probe and it was shipped out, received within two days. Took out a few screws on the back of the stove installed it, put it all back together and it’s working perfect.
Other Parts Used:
  • Tracy from Summerville, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven temp runaway tempreture, oven light out, sensor was changed for temp drifting low
The light and sensor were straight forward and easy. The EOC was as well but there was one glitch. You have to also purchase the black panel overlay, you cannot use the old one. While the adhesive will still adhere, the keypad is different and REQUIRES the new cover. This would have been good to know when I ordered parts as I did not know until I got the three parts and had to reorder the overlay creating a weeks delay in it's repair.
Other Parts Used:
Light Bulb Oven Electric Control Board
  • Kenneth from LIBERTY, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

37 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Delano
November 24, 2019
Oven temp won’t go over 250 degrees. It also takes about 30mns to reach that temp.
For model number LGEF3045KFK
PartSelect logo
Hello DeLano, thank you for your question. The most common part that causes that issue is the oven sensor prob PartSelect Number: PS1528542. You can test it with a multi meter. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!

49 people found this helpful.

Was this helpful?
Thank you for voting!
Edward
November 28, 2019
Used the self cleaner on the oven, and now it won't come on to bake. Broiler seems to be working. I have seen posts about a thermal fuse. Any help would be great. Thank you. I would like to repair it myself if possible. Not a good day to happen.....thanksgiving day!
For model number FFEF3017LSG
PartSelect logo
Hello Edward, Thank you for the question. I suggest testing the Oven Probe Sensor, PartSelect Number: PS1528542. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!

15 people found this helpful.

Was this helpful?
Thank you for voting!
Rona
December 24, 2019
My oven does not heat evenly. I had the oven probe (sku# 31690003) replaced but it did not fix the problem.
For model number wfe324lw0
PartSelect logo
Hi Rona, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your elements with a multi meter to see if they are working correctly or not. They should be reading between 0 - 50 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. I hope that helps. Good luck with your repair.

9 people found this helpful.

Was this helpful?
Thank you for voting!
Desiree
October 26, 2021
Hi. Stovetop burners, clock and all displays working fine, but the oven is not coming to full temp. Last night it took over two hours to get to 227 degrees F. Have not seen either element glow orange, but by touch they are definitely heating up some, just not a lot. Have not been able to view bottom element, as one screw is rusted or stripped, and I haven’t been able to get it out yet. Are the heating elements a binary type thing? Are they ever “partially working,” or is it a case of: if they are heating at all, the issue is probably something else? Is it possible that this issue could be caused by a bad temperature sensor? If so, can that be tested without removing? Just trying to figure out what to check next, or what the issue likely is. Thanks so much for any help! Desirée
For model number LGEF3045KFB
PartSelect logo
Hello Desiree, Thank you for the question. This is normally an indication the Sensor is defective. In order to test it, the sensor will need to be removed. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. We hope this helps!

8 people found this helpful.

Was this helpful?
Thank you for voting!
IKE
November 2, 2021
What is the temperature sensor part number and the location of it in the oven?
For model number FGF368GQF
PartSelect logo
Hello Ike, Thank you for your inquiry. We have researched the model number you have provided and show the part number as PS1528542. It is located on the right hand side of your oven. We have included a link to our repair video on installing the part. We hope this helps.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Frank
October 29, 2019
The oven does not start up, replaced element. Still does not start up. Would it be the temp probe ?
For model number 79094142312
PartSelect logo
Hello Frank, Thank you for the question. It is possible the probe is defective. You can test it with a multi meter. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If both elements are not coming on, it is more then likley a defective Electronic Control Board PartSelect Number PS8689401. Hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Pat
December 26, 2019
How do i know if it is an igniter or a sensor? My oven doesn't get hot igniter is orange.
For model number ffgf3023lwd
PartSelect logo
Hello Pat, thank you for your inquiry! We recommend replacing the Oven Bake Igniter if your oven isn't getting hot. If the element shortens out, is no longer glowing, or is only glowing red or orange, replacing the igniter is the solution. I hope this information helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Read
November 7, 2019
My oven will not start after cleaning. The igniter comes on and after about 10 seconds it trips the GFCI. I suspect a thermal fuse, but I cannot find one in the parts list.
For model number LGGF3043KFV
PartSelect logo
Hi Read, Thank you for your question. There is no fuse for this model. According to your owner's manual, where your oven is a self cleaning oven, it cleans itself with high temperatures, which eliminates soils in the oven or reduces them to ash that you may wipe away with a damp cloth. The heat from the oven during the self cleaning may have damaged a wire in the oven that may be causing the breaker to trip. You will need to check with a technician to verify what is causing this issue. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Martin
November 10, 2019
Surface burners and oven is not working but clock setting is working.
For model number FEF368GBA
PartSelect logo
Hello Martin, thank you for your question. The oven control board is what control the oven. If the oven isn't working at all (bake or broil) the electronic board should be replaced. The surface burners are controlled by the infinite switches. We would recommend testing the switches to determine if they are faulty. I hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Amanda
November 23, 2019
Can a temp. Sensor be going bad and still read good on a meter. Oven seems to lose heat and quit working after preheat. Sometimes u can turn it off and on and it will start back working group right everything going else works fine no codes either
For model number Ffef3015pwb
PartSelect logo
Hi Amanda, the temperature sensor is part PS1528542. Thank you for your question and good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1528542
Manufacturer Part Number: 316490000
Brand
Model Number
Description
Frigidaire
00462048A
Range - Range
Frigidaire
00462048B
Range - Range
Frigidaire
00462048C
Range - Range
Frigidaire
00462048D
Range - Range
Frigidaire
20462052A
Range - Range
Frigidaire
20462052B
Range - Range
Frigidaire
20462052C
Range - Range
Frigidaire
30458356A
Range - Range
Frigidaire
30458356B
Range - Range
Frigidaire
30462042B
Range - Range
Frigidaire
40462051B
Range - Range
Frigidaire
40462051C
Range - Range
Frigidaire
40462051D
Range - Range
Frigidaire
40466006B
Range - Range
Frigidaire
40466006C
Range - Range
Frigidaire
60462050A
Range - Range
Frigidaire
60462050B
Range - Range
Frigidaire
60462050C
Range - Range
Frigidaire
60462050D
Range - Range
Frigidaire
70462040A
Range - Range
Frigidaire
70462040B
Range - Range
Kenmore
79071342700
Range
Kenmore
79071342701
Range
Kenmore
79071342702
Range
Kenmore
79071342703
Range
Kenmore
79071342704
Range
Kenmore
79071342705
Range
Kenmore
79071342706
Range
Kenmore
79071343700
Range
Kenmore
79071343701
Range
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service