Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
William P - March 6, 2023
Verified Purchase
Fire station stove
The parts came quickly and I repaired the stove , now the firemen are back to cooking again ??
★★★★★
★★★★★
Cor D - December 21, 2018
Verified Purchase
Part works perfectly
The part corrected my malfunctioning element athough the instruction stopped short of showing how the part was supposed to be connected to the element. Luckily, I watched the video which was extremely helpful. Also, the part came within a day of ordering - very speedy!
★★★★★
★★★★★
Michael D - April 6, 2024
Verified Purchase
Wasn’t the problem the computer board is gone
Yes this wasn’t the problem after all the computer board in the back is gone to one side of the stove
★★★★★
★★★★★
Sandeep K - August 16, 2019
Verified Purchase
Parts are good and working fine...
Parts are good and 2 out of 4 are working fine. I did not use the other 2 yet.
★★★★★
★★★★★
Kyle H - September 29, 2020
Verified Purchase
Easy repair. Great part!!!
Part was easy to install. Stove works like new again!!!
★★★★★
★★★★★
Anthony P - January 11, 2019
Verified Purchase
Great parts.
Bought aftermarket from another vendor but it was garbage. Bough from partselect and a big difference in the quality of parts and with an easy installation. Will use again????
★★★★★
★★★★★
ALEKSANDAR V - June 3, 2020
Verified Purchase
Easy repair, quick delivery
It’s all in the title. I ordered over the phone the guy was really helpful. Fixed my stove! Yesssssss
★★★★★
★★★★★
Anthony P - September 15, 2018
Verified Purchase
Great OEM parts
Parts’s came fast and my appliance is back in order. Great service as usuall!
★★★★★
★★★★★
Tannour B - March 4, 2020
Verified Purchase
Best service and a very practical part
The instructions that came with the part made so easy for me to replace without the help if a technician. The part itself was a manufacturer part, it was actually an improvement on the original part
★★★★★
★★★★★
Marian P - November 10, 2020
Verified Purchase
Perfect part for the job
The part came in exactly as described in the instructions were easy to follow. My stove element is back in working order.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 18 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Stove would not heat up
Cut old wires to receptacle, striped the wires, wire nutted to new receptacle, screwed new receptacle into stove and installed heating element.
Piece of cake, but then again my degree is in electrical engineering so I should be able to handle a couple of wire nuts.
After turning off the circuit breaker, I removed the elements and pans, raised the top and cut the wires to the receptacle assembly. Stripped the wires, slid on the shrink tubing and applied the wire nuts. I used a hair dryer rather than a match to shrink the tubing. Reinstalled the drip pans and inserted the elements. The instructions were clear and the project was easy. The stove works like new.
This was the second repair of the same problem. I realized this time that there was a poor connection between the burner and the receptacle causing a arch, creating extra heat and burning out the receptacle. All that I had to do was to cut two wires to the existing receptacle assembly and use the wire nuts to connect the new assembly and one philips screw holds it in place...The kit required me to assemble it first and there were four items to put together. No problem....
3 burners had stopped working and drawer glides broke.
Removed the old burners and lifted top assembly. It made it easier to work with the wires by removing the top, easily remove the screws holding the wire harness and ground wire, then slid the top to the right and it came right off. splicing the wires in was very easy and all the parts required were sent with the kits. reassembled stove and it worked like a champ. The drawer was very easy as well the plastic glides were all broken or worn out, and one screw each to replace. like a new oven now, saved at least 300 by not purchasing a new one.
It was very easy, the element is held in place by a point that protrudes from the element's frame through a hole in the stove top. This hole is located directly across from the electrical socket your bheating element plugs into, under the stove top. Push the heating element in towards the socket and the heating element can now be lifted up and out of the burner tray. Remove the burner's reflector tray. Remove the single screw securing the elements electrical socket to the stove top. Lift the stove top up and secure. Remove socket and cut wires about 4 inces from the old socket. place shrink wrap over each wire and wire nut new socket to existing wires. place shrink wrap over wire nuts and heat to secure. reverse proceedure and test.
First I disconnected the power, removed the screw that hold the element in place. Then, I pulled the element out and cut the two wires. I connected the two wires with the new element as the instruction provided by Part Select. I put the element back and screwed it in place. I plugged in the power and turned on the burner. It works. It is really easy to repair.
Other Parts Used:
DAICHI from Louisville, KY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Contacts for burner plugin was burnt
Easy fix. Lift the top of the stove and change the connector. No problem because the parts were exactly what was needed.
Removed back plate, replaced infinite switch. Replaced receptacle holder. Took a moment to see how to install wires into the receptacle, no instructions on orientation of wires into the receptacle. Wired receptacle per instructions. Placed receptacle into holder and installed burner. Burner Burner would not lay flat, receptacle longer than original. Removed receptacle from holder, plugged in burner and placed burner into position.
Unscrewed the switches and let the switch hang while replacing one wire at a time. Followed instructions on wire replacement. Exact parts, only shaft on 6" switch was too long -- okay, because it is designed to break off a piece on end of shaft, then the knob fit. Everything was perfect.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carlos
April 30, 2018
My oven doesn't heat at all. The clock doesn't work but all of the top elements will burn. What could be the causing this problem. Please help! Thanks
For model number WFC150M0EW0
Hi Carlos,
Thank you for your question. There are a few parts that you could check. I would suggest testing your elements and your temperature sensor. You can test all three of those parts with a multi meter. If they are all working then it may be your electronic control board that is the issue. I hope that helps. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Deborah
January 14, 2019
Trouble with burners on stove they will heat up to high when they are set on low.
For model number WFC150M0EB0
Hi Deborah, thank you for your question. Be sure to cut power to your appliance and remove any parts before doing tests. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your element. It should be reading between 0 - 50 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. It could also be your wiring that is the issue but you should see visual damage on that part in most cases. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Earl
November 17, 2019
Replaced receptacle and stove top burner, burner still doesn't work. What can be the issue?
For model number RF365PXMW1
Hi Earl, the only thing left would likely be the switch for the burner. Thank you for your question and good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Merlin
March 10, 2023
The stove top heating element heats up than it shuts off and than doesn't come back on
For model number Rf303pxkq2
Hi Merlin, thank you for the question. According to our research, there are two sizes of surface elements on the cooktop in this model. If your element size is 8 inches, we recommend checking the infinite switch, part number PS11740775. If this is fine, most likely the burner surface element, part number PS11747315, is faulty and needs to be replaced. Similarly, if your element size is 6 inches, we suggest inspecting the infinite switch, part number PS11740785. If this is fine, most likely the burner surface element, part number PS11753286, is faulty and needs to be replaced. We hope this is helpful!
I have made sure that my stove is leveled properly - inside oven rack and range top are both level front-to-back and side-to-side. Each of the elements, however, are not level. This makes cooking really challenging because when I add oil or other liquid to my pan, it all flows to one area of the pan. What do you think the problem is? Thanks for your help.
For model number RF365PXGQ0
Hello Stormi, thank you for contacting us. According to our research, the terminal block might have become loose, burnt, or physically detached from its mounting bracket under the cooktop. This component provides the structural support for the burner prongs, and any sagging or misalignment here will force the entire heating element to tilt. We would suggest replacing the terminal block, part number PS389217, to fix the issue. We hope this sorts out your problem!
This element has looped terminal ends and 5-turns. This element features pigtail, looped ends. This element is 8" in diameter. This element is 2100 watts. This element coil has 5 turns. This surface element has a black c...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Wire Plug or Connector","title":"Wire Plug or Connector","url":"/Range-Wire-Plugs-and-Connectors.htm"},{"position":2,"name":"814399","title":"814399","url":""}]
![](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11740785-1-S-Whirlpool-WP3149404-Infinite-Control-Switch-6-amp-quot.jpg "Infinite Control Switch, 6" – Part Number: WP3149404")
