Suspension Rod Kit - Set of 4

Hi Lisa, Thank you for the question. I suggest checking the Suspension Rods, PartSelect Number PS3502193 over for damage first. if the roads and the supports on the rods, PartSelect Number PS3502189 are all intact, you may need to replace the Basket Hub Kit,PartSelect Number PS11723155. Good luck with the repair!

Hello Michael, thank you for your question. The kit comes with the 4 rods, and caps - everything you need for installation. Usually if the tub is tilted, or the wash is always unbalanced that is a good indication that the suspension rods are bad. I hope this helps!

Hello Dee, thank you for writing. This Set of 4 Suspension Rod Kit is the compatible replacement for your model. Good luck with your repair!

Hi Michael, Thank you for the question. This does sound like an issue with the bearings. I suggest replacing the PartSelect Number PS3503261, Tub Seal and Bearing Kit. This kit includes the shaft, 3 bearings, seals , grease, adhesive and the spanner nut, which is NOT sold separately. Also may require a bearing driver tool to install. PS3503307. Hope this helps!

Hi Corina, Thank you for your question. The UL error code stands for unbalanced or off-balanced load which means the control has recognized the the tub is off balance during the spin cycle. If you have already rearranged the clothes and the code is still coming up, then the stator may be cracked. This would causing the unit to become unbalanced during the spin cycle. You will need to remove the rotor from the bottom of the washer and inspect the stator for cracks in the white plastic housing, even a hairline crack can cause this problem. If you find the stator is cracked you will need to replace it. Also, the suspension rods could be worn and you will need to inspect them to verify if they are causing the issue. I hope this helps. Thank you and have a great day!

Hello James, thank you for writing. There should always be some give, you should be able to move it back and forth with it always laying in center when at rest. However, it is predominantly leaning towards the side then you should be looking at the leveling feet PartSelect Number PS11753762 or Suspension Rod Kit - Set of 4 PartSelect Number PS3502193. We have an installation video for you to access. We hope to hear from you soon.

Hello Jeff, thank you for writing. This Suspension Rod Kit part PS3502193 is the correct replacement for the model number you provided, MVWB850YW1. It is designed to function on the unit. We hope this answers your question.

Hi Richard, Thank you for the question. If it is a rubbing or grinding noise I suggest checking the Basket Hub Kit, Part Number: PS11723155 for any wear or damage. The basket hub is located under the agitator. If the hubs are good you will need to replace the bearing. The bearing is only sold as part of the outer tub assembly Part Number: PS3503107. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!

Hello Nolberto, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS3502193. Hope this helps!

Hi Raelyn, Thank you for the question. If the suspension rods are defective and the drum is not stable, it can cause wear on the seals and it will leak. Hope this helps!