This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This kit includes one driver hub and two driven basket hubs. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.
This part makes sure that the lid is shut before allowing the machine to start or agitate.
NOTE: This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including
This rotary position sensor is a genuine OEM part for your washing machine. It helps to ensure the load of clothing stays balanced during the wash cycle. Customers have rated this repair as easy. To c...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
This is a replacement lid hinge for your washer. It is approximately 2.5 inches in length and 1.5 inches in width. The lid hinge is what the lid for your washer pivots on. If the lid hinge is damaged,...
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
$194.18
In Stock
Questions And Answers for WTW8540BW1
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Damian
July 27, 2021
My Whirlpool washing machine is dripping water into where I put my clothes to wash. Which part is that?
For model number WTW8540BW1
Hello Damian, Thank you for the question. This is normally caused by a defective Water Inlet valve that is stuck open and allowing water to flow through to the Tub. The Valve will need to be replaced. We hope this helps!
My whirlpool cabrio started leaking water at some point during use… I just love this washer and dryer and wonder if it’s worth fixing? Thank you!
For model number WTW8540BW1
Hello Judi, thank you for contacting us. According to our research, we would recommend checking the drain hose for any damage. If the drain hose is fine, then the issue is most probably with the drain pump, part number PS11754363. You may need to replace it to fix the issue. We hope this helps!
Hi Jackie, thank you for reaching out. If Sd or Sud appear in the display, you have excessive suds in the washer. The washer is running a suds reduction routine. Allow the washer to continue. Use only high efficiency detergent. Always measure detergent and base detergent quantity on load size. We hope this information is useful!
Was this helpful?
Thank you for voting!
Jeff
20 days ago
My whirlpool cabrio makes a very loud beating noise when the drum is spinning at high speed
For model number WTW8540BW1
Hello Jeff, thank you for reaching out. According to our research, the issue is most probably with the suspension rod, part number PS3502193. You may need to replace it to fix the issue. We hope this solves your problem!
My Whirlpool cabrio platinum washer makes a horrible squeaking sound when agitating and spinning. It gives the ul error when the washer is not unlevel. It's a continuous error during the spin and rinse and when you move the clothes to restart the cycle, it continues. It's like the agitator is unlevel all the time
For model number WTW8540BW1
Hello Elizabeth, thank you for your inquiry. Our recommendation for your model number is Suspension Rod Kit - Set of 4 part PS3502193. The suspension rods are used to keep the drum assembly upright. The rods attached to the four corners on top of the cabinet to the base of the drum. When a rod breaks, the drum will be tilted which will cause the drum to be loud during different cycles. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Removed a cap in the center of the tub basket which has a bolt that needs removed I believe it's a 9/16 after I removed the bolt I then removed the center of the bottom of the basket assembly which then allowed me to get to the basket hub that needed replaced it was a little dirty and I couldn't get it out so I sprayed a little penitrating oil on it let it sit a little then I was able to remove the hub and install the new one then I put it all back together and the washer is working great
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.