This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This kit includes one driver hub and two driven basket hubs. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.
This part makes sure that the lid is shut before allowing the machine to start or agitate.
NOTE: This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including
These parts are the replacement suspension rod supports for your washer. They are made of plastic and are approximately 1 ½ inches in diameter. This package will come with an 8-piece set of suspension...
This rotary position sensor is a genuine OEM part for your washing machine. It helps to ensure the load of clothing stays balanced during the wash cycle. Customers have rated this repair as easy. To c...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
The suspension rods are used to keep the drum assembly upright. The rods attached to the four corners on top of the cabinet to the base of the drum. When a rod breaks, the drum will be tilted which wi...
$132.59
In Stock
Questions And Answers for WTW8600YW1
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Renee
November 25, 2019
My whirpool cabrio is super loud almost grinding sound when it gets to spinning. Just wondering where to start. A bearing ?
For model number WTW8600YW1
Hello Renee, thank you for your question. There are a few parts we would recommend testing/replacing. They are Basket Hub Kit Part Number: PS11723155 and the bearing kit PartSelect Number PS3503261. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Vijay
December 21, 2019
How do i clean the washer, sometimes clothes get stains after wash.. kind of dirt stains...
how do i make sure all the drain, down storage is flushed out clean...
For model number WTW8600YW1
Hello Vijay and thanks for writing.
For your convenience, we have attached the link to your manual with repair instruction. We hope this helps. Good luck with your repair
https://partselectcom.azureedge.net/assets/manuals/F752186FCC5474BD9BEAF42BD6A4E6E74E8CABDB.pdf
1 person found this helpful.
Was this helpful?
Thank you for voting!
Douglas
August 27, 2022
When a load of wash is done there are what looks like small pieces of black lint in the tub that I have to vacuum out. Do you have any idea where this may be coming from? It happens after every wash.
For model number WTW8600YW1
Hello Douglas, Thank you for the question. We suggest checking the Filter At Bottom Of Outer Tub to make sure it is not blocked and preventing the filter from catching lint or allowing it to enter back into the tub during the wash. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Pat
April 5, 2023
often gives the unlevel code .... washer is perfectly level
For model number WTW8600YW1
Hello Pat, thank you for contacting us. If uL appears in the display, the load is out of balance. The washer is running a load-balance correction routine. Allow the washer to continue. If the dial is flashing and the washer has stopped, redistribute the load, close the lid, and press the start button. If the problem persists, you may need to replace the suspension rod kit, part number PS3502193. We hope this solves your problem!
Washer gets to final rinse cycle, and then will not spin. Does this with different loads and weights.
For model number WTW8600YW1
Hello Thomas, thank you for your inquiry. Make sure that the washer is loaded properly and the drain tube is not clogged. If these are not the issues, then you may need to replace the drain pump, part number PS11754363, to solve the problem. Glad to be of assistance!
Removed a cap in the center of the tub basket which has a bolt that needs removed I believe it's a 9/16 after I removed the bolt I then removed the center of the bottom of the basket assembly which then allowed me to get to the basket hub that needed replaced it was a little dirty and I couldn't get it out so I sprayed a little penitrating oil on it let it sit a little then I was able to remove the hub and install the new one then I put it all back together and the washer is working great
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
