Water Inlet Valve with Wire Harness Specifications
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Washer Water Inlet Valve with Wire Harness
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Pat G - July 23, 2018
Verified Purchase
Washing machine repair
Quick delivery and repair went well. My washing machine is back in order. Thank you
★★★★★
★★★★★
James V - September 26, 2022
Verified Purchase
easy repair
Good service
★★★★★
★★★★★
Doug A - September 17, 2020
Verified Purchase
No hot water
Part arrived on time and solved the problem. Some cycles were slow and some didn't work, because the water wasn't flowing to hot water, or bleach options.
★★★★★
★★★★★
Sean R - June 22, 2020
Verified Purchase
Washer works again
Washer was frequently getting a LF code and washes would take forever, requiring resets to complete. Replacement part works well. Easy to follow the video online to install.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Original part had a split and was leaking
The repair went very easily. Maytag/Whirlpool really makes these types of repairs simple, just need basic tools. If you leave the wiring harness on the old inlet valve and just remove the connectors from the control unit, you can reference it when plugging in the new harness after the new inlet valve is installed. Two screws and three hose clamps later (not counting the screws on the back of the washer) and the old inlet was out, the new one in.
Other Parts Used:
James from Farmington, NM
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
42 of 69 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hugh
December 27, 2017
Will this fix my washer. It want fill but everything works. Neither the cold nor cold fill cycles will work
For model number Mvwb400vqo
Hi Hugh,
Thank you for your question. If the washer is not filling with water, then the issue is likely with the water inlet valve. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Duy
May 20, 2019
Hello, the fabric softener dispenser on my top load washing machine is no longer dispensing. The detergent and bleach dispensers are working without issues. After opening the washing machine, i have removed the fabric softener tray and hose, flushed it clear with water, and it continues to not dispense. Will replacing the water inlet valve with wire harness correct this?
For model number WTW6600SB3
Hi Duy, thank you for your question. The parts to check for this problem after cleaning out the area would be your water inlet valve. You can test that part with a multi meter to make sure it is working correctly. It should be reading between 500 - 1500 ohms. If that part is fine then the issue might actually be in your control board. I hope that helps. Good luck with you repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Peggy
November 20, 2024
Water level malfunction, fills the whole way to the top of the drum.
For model number MTW6700TQ1
Hi Peggy,
Thank you for your question. If the washer will not stop filling with water, first check the water inlet valve. If a component inside the water inlet valve has failed, water may continue to fill the tub even after the desired level is reached. You will need to remove and inspect the water inlet valve visually and check it for continuity with a multimeter on the Rx1 setting. Before removing and testing the water inlet valve, unplug the washer from the electrical outlet. inspect the valve for any signs of wear or damage. If there are no visible signs of damage, test the water inlet valve with the multimeter. You should receive a reading between 200 and 500 ohms. If you get any other reading, you will need to replace the water inlet valve. If the water inlet valve is fine, remove the water pressure hose and submerge one end of it in water and blow in the other end. An undamaged hose will not have any bubbles coming out of it. Inspect the hose for any signs of cracking, wear, or damage. If it is damaged you will need to replace it. If the hose is fine, the electronic control board may need to be replaced as it controls the water level. We hope this helps!
There is no cold water being delivered into the washer. Get a Lf message during cycle and when running the automatic diagnostic water is leaking out onto the floor during the cold water cycle. Will the water inlet valve replacement likely take care of this?
For model number wtw6700tw1
Hi Mike, thank you for reaching out. We have found that the lf error code indicates that the washer is taking too much time to fill the tub. If cold water is not being delivered into the washer, it may be due to the defective water inlet valve, part number PS3490233. If your water inlet valve is defective, the washer will take more time to fill and display lf error code. You may need to check the water inlet valve to fix the issue. We hope this information helps!
Was this helpful?
Thank you for voting!
Bob
January 11, 2019
I was able ouch in the left clip to lift the top of the machine, but i cannot push in the right clip. It won't budge. Any suggestions?Thank you,
bob
For model number 110. 28062800
Hello Bob, thank you for your question. If the clip is stuck in the top you may need to use a flat putty knife and rubber mallet to hit the clip and push it back inside the unit to release. This may break the clip, which may be the only way to remove it unfortunately. I hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing help...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
