Part Location Diagram of 285748 Whirlpool Agitator Repair Kit
See part 17 in the diagram
Replacing your Kenmore Washer Agitator Repair Kit
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Agitator Repair Kit

★★★★★
★★★★★
16 Reviews
$46.38
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS334622
Manufacturer Part Number 285748
Manufactured by Whirlpool
Product Description

Agitator Repair Kit Specifications

This agitator repair kit comes with a long cam, a thrust spacer and four dogs ears (agitator cogs). This repair kit is used to move the upper agitator and it connects the base of the agitator with the agitator top (mover). This part has been updated by the manufacture.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Kenmore Washer Agitator Repair Kit

Replacing your Kenmore Washer Agitator Repair Kit
Troubleshooting
This part fixes the following symptoms:
Will not agitate
This part works with the following products:
Washer.
This part works with the following products:
Kenmore, Whirlpool, Amana, Admiral.
Part# 285748 replaces these:
AP3094520, 2921, 285748, 285748, 285748VP, 3347085, 3351000, 3363662
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
16 Reviews
4.8
Filter By Rating:
  • 5 Stars
    15
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    0
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 4.5 / 5.0, 57 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Top of agitator didn't agitate. It was slipping.
Pried off the agitator cap. Removed the bolt. Removed the agitator. In the process of separating the agitator from the base, a plastic tab broke off which concerned me. BUT, in the directions with the part it explains that the 2 tabs are for factory assembly and to break both of them off. Broke off the second tab and reassembled. My 18 year old Kenmore is back in action.
Other Parts Used:
Thrust Spacer
  • Steve from Naperville, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
111 of 123 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top part of agitator was not locking in and turning
Remove top "cap" on agitator to expose the bolt that holds the agitator to the drum shaft. Undo the bolt and pull out the agitator. Disassemble, toss the old parts and install the new parts in reverse order. Repair took less than 5 minutes and we can now do full loads of laundry again!
Other Parts Used:
Fabric Softener Dispenser Thrust Spacer
  • Glenn from Merrick, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
47 of 55 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top half of the agitator was not turning.
I just took the cap of the agitator off and the 3/8" nut was right there. I took it off with a socket, removed the top agitator, slid the assembled kit in , replaced the agitator and cap...that was it !!. These parts priced thrrough Sears were $77.00 plus S&H. Your price for the entire kit- less than $12.00 !! If you don't think that you can do this yourself, have your 7 year old child do it. Took me about 5 minutes. Great price and fast shipping. Thanks
Other Parts Used:
  • Dennis from Avon, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
24 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer did not agitate
popped thecap off removed the bolt, pulled agitator off replaced cogs(dogs) then put back together. works like new.whole time took about 10-15 min. saved my self 150.00 by not hireing repair man.
Other Parts Used:
Agitator Directional Cogs
  • Eric from Jacksonville, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
21 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top section of the agitator would not work properly
Removed the top cap, unbolted the agitator, lifted off the top section, removed old "dogs" and replaced new "dogs", reinstalled agitator and tested.
Other Parts Used:
  • James from Crownsville, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
12 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Darn thing hadn't "Agitated" for about 10 years!
After removing the bolt (7/16" head), and using a pair of pliers to remove the 3-4 in deep "cup", it was immediately obvious how to assemble the new cup and pawls (ratchets).

Orienting the black "bearing" was not so obvious, but on closer inspection of the illustration, it became clear. The four "ears" of the bearing go closest to the pawls. The little tabs that are co-planar to the ears fit into the four grooves of the new cup.

And here's the trick (besides making REALLY, REALLY SURE how the pawls orient)--Soak the black bearing piece in hot water to soften it up, and let it slide over the cup better. If you don't, you risk breaking it. If you do, it slides over and "clicjs" into place, with the ears resting right against the bottom lip of the cup, capturing the pawls.

Installation back into the washer is obvious.

The thing works like a charm! It hasn't worked this well for a decade!
Other Parts Used:
  • Stephen from Cornwall, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
10 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tub off center. Upper agitator not driven.
Pop off the softener dispenser. Pull the cover/ seal out of the upper agitator. With 7/16" socket and extesion bar, remove bolt and pull upper agitator straight up and off. dump out old assembly and replace with new assembly. Set back in place and replace bolt. Repair kit comes with good instructions and new rubber O ring for bolt cover/ seal. (thanks).
The suspension spring takes more effort but not hard. with washer laying on face I used a piece of 2x4 to pick up the tub in the direction of the broken spring. Put the new spring through the wire hook loop and snake it through the slot in the frame and you can see how it locks in place. With the 2x4, push the tub toward the new spring until you can hook it through the slot on the tub frame. Done. Parts cost less than an estimate from a service call and I finished the job in 30 minutes, which includes unplugging the power cord, turning off the water and taking off the hoses so I could lay the washer down. Saved the website in my favorites for the same great prices and fast shipping next time.
Other Parts Used:
Suspension Spring
  • Thomas from Addison, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Socket set
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top half of agitator wasn't moving
First, I wrestled off the top cap of the agitator. Then, I unscrewed the bolt and took out the cam. I noticed that the agitator dogs were worn smooth. I replaced them, put it all back together and VOILA! I bought the whole agitator kit, not knowing what I was going to find, because I wasn't a Magtag repair woman. It ended up that the cam that came in the kit was too big for my washer anyway. Luckily, all I needed was 4 plastic dogs. The price of the whole kit was so inexpensive anyway, it was no big deal. Especially because, I was looking to buy a new washer or a big repair bill. This website is great! Thank you.
Other Parts Used:
  • Debra from Orange, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Teeth on the cogs and agitator were worn out
Very simple, pop the top open, unscrewed the bolt, and pulled the old agitator out. The new one went in just as easy.
Other Parts Used:
Agitator Assembly
  • Andrew from Dayton, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
9 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
With full load, clothes were not agitating correctly - very little action or movement of the upper agitator section.
Took off softener dispenser, pried off top of agitator, removed bolt from top of agitator.

Then pulled out the agitator assembly for easier access.

Used screwdriver to brake small plastic keepers holding secondary agitator ratchet clutch to the secondary agitator.

Assembled and inserted new ratchet mechanism in the top of the agitator, making sure 4 small square pegs protruding from the end of the new assembly fully entered into mating holes on the secondary agitator.

Placed the agitator back on the agitator post and installed and secured bolt. Replaced cap and installed softener dispenser.
Other Parts Used:
  • Douglas from Lancaster, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Laura
January 31, 2019
I ordered this agitator repair kit for my Kenmore washer because from the options on your website, it seemed to be the part it needed. It was easy to install due to your video, thank you! However, it must not be the part that i needed, because my washer is still not running properly. It does not agitate, or spin. I put the load in and the washer fills with water, the lid stays locked the whole time, it goes through the cycles but i never hear any agitation or spinning noise. When i open it after it says it is done, the water has drained but the spin cycle didn't work, so the clothes are still wet and towards the bottom of the load the clothes are sopping wet. I can tell the machine didn't agitate either, because the clothes look like they just soaked in the water and didn't get clean. Can you please tell me what part would be a better choice? I really appreciate it!
For model number 11020022011
PartSelect logo
Hello, thank you for inquiring! As your appliance is not agitating or spinning, we would recommend checking your drive motor and your gearcase, as they are what creates the movement of the tub. More than likely, one of these parts is faulty and will need to be replaced. The drive motor for your model is PS11747980, and the gearcase is PS12584225. We hope this helps!

10 people found this helpful.

Was this helpful?
Thank you for voting!
Norma
December 28, 2021
Will this fit for a Maytag washer.
For model number MVWC416FWO
PartSelect logo
Hello Norma, thank you for writing. No, the part you had chosen is not compatible for your model. The parts for your model are Washplate PartSelect Number PS11728097, Washing Machine Upper Agitator PartSelect Number PS11727882, Agitator Bolt PartSelect Number PS11748116, Washer PartSelect Number PS11742027. We have an installation videos for you to access. We hope to hear from you soon.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS334622
Manufacturer Part Number: 285748
Brand
Model Number
Description
Kenmore
10682872600
Washer - Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
1101050299
Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
Kenmore
11014502300
Washer
Kenmore
11014852300
Washer
Kenmore
11016512690
Washer
Kenmore
11016512691
Washer
Kenmore
11016512692
Washer
Kenmore
11016602690
Washer
Kenmore
11016602691
Washer
Kenmore
11016602692
Washer
Kenmore
11016602693
Washer
Kenmore
11016611690
Washer
Kenmore
11016611692
Washer
Kenmore
11016612690
Washer
Kenmore
11016612691
Washer
Kenmore
11016612692
Washer
Kenmore
11016812501
Washer
Kenmore
11016812503
Washer
Kenmore
11016872690
Washer
Kenmore
11016872691
Washer
Kenmore
11016872692
Washer
Kenmore
11017122700
Washer
Kenmore
11017132700
Washer
Kenmore
11017812600
Washer
Kenmore
11018522790
Washer
Kenmore
11018522791
Washer
Kenmore
11018532790
Washer
Kenmore
11018542890
Washer
Kenmore
11018542891
Washer
Kenmore
11018702790
Washer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service