Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ron K - December 16, 2021
Verified Purchase
Heater Assembly fit perfect
This heater assembly came in within a week and fit perfect in my GCET1041AS1. My tenants are a functional dryer again!
★★★★★
★★★★★
Paul S - September 16, 2021
Verified Purchase
Arrived quickly, works well
The part arrived very quickly, in one day. There are two places the connectors can be and unfortunately my model of drier required the connectors to be in the one that the part was not set up for. I was able to disassemble the element and rotate it 90 degrees to the other orientation so that the connectors were in the required place. Works great.
★★★★★
★★★★★
Philip R - June 25, 2021
Verified Purchase
perfect fit
perfect fit, fast shipping, great price AAA+
★★★★★
★★★★★
Michael M - March 18, 2021
Verified Purchase
Great part
The part came fast installed it and it works great good job
★★★★★
★★★★★
Graham B - January 10, 2022
Verified Purchase
As ordered and fast delivery!
The part was a complete assembly including a couple of peripheral items - ready to install!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.4 / 5.0, 8 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer still turned, but would not heat
Had to remove tub to get to rear wall to make the repair and then put it back together in reverse order.
Other Parts Used:
CAROLE from MONTICELLO, AR
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
54 of 80 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had a professional do the install. He had difficulty aligning the cabinet so that it did not rub against the dryer drum. The parts you mailed me worked fine and resolved the problem. Thanks. Even having to pay the installer saved me 50% on the total job.
Installer unscrewed the screws on the upper panel, loosened the pulley holding the rubber drum cable, and pulled the drum up and out of the unit. With the rear heating element exposed, he unplugged the wire connections to the heating element, unscrewed the four screws holding the element to the rear panel and took the element out. Then he installed the new heating element by re-applying the four screws into the rear panel. He then replaced the thermal limiter which was directly at the right of the heating element by unplugging the wire connections to the thermal limiter and then unscrewing the thermal limiter from the rear panel. The process to install the new thermal limiter was the reverse process. He didn't install a new High Limit Thermostat because there was one attached to the new Heater. When all the new parts were installed, he reinstalled the drum by pushing the rear nub of the drum into the whole at the center of the heating plate. He then placed the rubber drum cable around the drum with the rough service facing the drum, placed the cable on the pulley and adjusted the tension of the cable with a screw driver. He then reinstalled the front panel by aligned the screw holes and reinserting and tightening the screws.
First: Remove front and top cover Second: remove electrical cover assbly Third: motor belt removed Fourth: drum assbly and bearing shaft and bracket bearing replaced Now I need urgently (already ordered) the thermostat and glide drum
Not having the repair manual made the repair more difficult. Prior experience made the job somewhat easy. Had to study every move to make sure no parts were not broken but overall the repair went without any problems. I found out that the bearing plate was removable to facilitate removal and replacement of the heating element. Advise if you are doing a repair of an appliance you don't know much about, take your time and everything should go well for you.
Removed top cover. Lowered control assembly. Removed front door assembly. Removed drum. Removed heater assembly. Removed support bearing and bracket using existing bonding ball. Re-assembled in reverse order.
Took the top dryer cabinet apart to replace all the above parts plus the dryer belt. Because of its age decide to replace all the parts from the above list. Three major problems: none of the video reviews showed this type of dryer. Some parts were practically impossible to get back together. Difficult getting the top square. The top of the cabinet picture did not indicate how the top was to be installed. After 23 hours finally got it back together. Then it would not start. Discovered a wire had come loose. The dryer works fine now.
Don’t do like I did and undo the drummer from the back of that thing pulled off the bearing
Other Parts Used:
Van from BLUFFDALE, UT
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not heat at all.
I watched the video you had. Did what the man said, checked out the parts, and orded the new ones. Then installed , as per video. It was Fun.
Other Parts Used:
ricky from okeechobee, FL
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
12 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gene
February 11, 2018
Does high level thermostat (ps446428) come with heater assembly ps2378363? I'm not sure if high level thermostat is ok.
For model number GLET1041AS2
Hello Gene, Thank you for the question. Yes the High Limit Thermostat that is at the top of the element in the picture comes with the new element. Good luck with the repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
October 2, 2017
Does this part come with the thermostat that is in the picture? Thank you.
For model number GLEH1642DS1
Hi Mark, Thank you for the question. Yes the High Limit Thermostat that is at the top of the element in the picture comes with the new element. Good luck with the repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
February 25, 2020
Dryer will not heat up is the heater element the answer
For model number 41794812301
Hi Paul,
Thank you for your question. If the dryer is not heating up, there are some parts that you will need to check to see which one is causing the issue. You will need to check the heating element, the thermal limiter, the high limit thermostat, the cycling thermostat, the cover assembly and moisture sensor and the electronic control board. You will need to test the parts with a multi-meter. Here is a link to one of our videos on YouTube that you may use as a general reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. To check the electronic control board, you will need to inspect it for signs of damage, wear or burn marks. If it shows any of these signs, it will need to be replaced. If it is the electronic control board causing the issue, part number 134216300, it has been discontinued by Frigidaire and you will need to contact them for information on a replacement part. Their telephone number is 1-800-374-4432 extension 0. If they provide you with a part number for the replacement part, you may call us back with it and we can verify if we have it available for you. You may also be able to locate the part you need by trying the following:
Using a search engine to type your part number and see if other retailers still have this part in stock.
Visiting online stores such as eBay and finding sellers that have this part.
Trying retailers and repair stores in your local area to see if they have the part in their inventory.
Talking to a local repair technician, who may have the part you need, or may be able to repair your existing part. If you are unable to find one through these methods, there is a company called Circuit Board Medics that may be able to repair it for you. Their telephone number is 1-800-547-2049. We hope this helps. Thank you and have a great day.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
January 27, 2022
SERIAL # XE90401404
I'm only getting partial heating. Top of the back of the dryer is very hot bottom no heat. Do I need a new heater?
For model number FEX831FS2
Hello Paul, thank you for your question. Not necessarily. We recommend trying Thermal Limiter - Limit 220 PartSelect Number PS419402 first. We have an installation video for you to access. Then try just the element PartSelect Number PS451032. We hope to hear from you soon.
Does the heater assembly come with high limit thermostat?
For model number FLSE60RGS1
Hello Steve thank you for your question. Yes the High Limit Thermostat will come with that assembly. Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jerry
August 2, 2018
Are there any instructions available to aid in the installation of the new heating element.. ?
Hi Jerry,
Thank you for your question. There is a video on our website that you can reference on how to install the heating element. The the dryer in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS418120. Also, here is the link to the video, https://www.partselect.com/PS418120-Frigidaire-131553900-Heating-Element-Assembly.htm?SourceCode=3&SearchTerm=131553900. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sally
May 6, 2019
Takes forever to dry anything...very low heat...do you think i need the whole heater assembly or just the heater coil...in your opinion..thank you
For model number 417.98702891
Hi Sally,
Thank you for your question. If the dryer is not heating as it should, there are some parts that you will need to check to see which one is causing the issue. You will need to check the heating assembly, the thermostat, the thermal limiter and the timer. If it turns out to be the heater assembly, the coil is available separately. The part number listed under your model number for the coil is PS451032. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Christopher
November 23, 2019
What other parts are advised to replace with a heating element
For model number 41797812701
Hi Christopher, referring to model 41797812701, I am unsure what you are referring to. Do you have a specific symptom with your fridge you are trying to fix? Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Mark
July 22, 2021
Does heater coil ps418120 fit this model
For model number FLEB8200DS0
Hello Mark, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2378363. We hope this helps!
Was this helpful?
Thank you for voting!
Robert
December 27, 2017
Trying to access the heater assembly. Through the front? If so having trouble releasing the the top panel from the dryer - 4 screws on top removed, still stuck at the bottom - clips?
For model number 41797812702
Hi Robert,
Thank you for your question. We do not have an installation video specifically for your part but we do have a video that should help you to figure out your repair: https://www.youtube.com/watch?v=gxcWQuqYWr0 . I hope that helps. Good luck with your repair.
The rear drum support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. If your dryer is making unusual noise...
This thermal fuse limiter, with a limit of 220 degrees Fahrenheit, is manufactured for both gas and electric clothes dryers. Once the internal temperature of the dryer reaches 220 degrees, the heating element cuts out.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Element or Burner","title":"Element or Burner","url":"/Washer-Dryer-Combo-Elements-and-Burners.htm"},{"position":2,"name":"131475320","title":"131475320","url":""}]
