Part Location Diagram of W11449841 Whirlpool GEARCASE
See part 1 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

GEARCASE

 Fits your MVW7232HC0!
$308.90
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your MVW7232HC0!
PartSelect Number PS16730208
Manufacturer Part Number W11449841
Manufactured by Whirlpool
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Maytag, Whirlpool, Kenmore.
Part# W11449841 replaces these:
W11185701, W11423759
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

5 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mel
January 14, 2024
Error code f7e4. How do I know if it’s the gear case or the clutch that’s the problem? There’s a small spattering of oil on the interior/underneath the washer. Is the control board also at fault with this error code?
For model number MVW7232HW0
PartSelect logo
Hi Mel, thank you for reaching out. According to our research, the F7E4 error code indicates that the clutch failed to engage the spin basket in the spin mode. We would recommend checking the washer's clutch, part number PS10064562. It spins the basket during the spin cycle. You may need to replace it to fix the issue. We hope this solves your problem!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Rita
January 20, 2024
At end of spin cycle machine makes a horrible grinding noise. It only happens @ end of the cycle. Machine works perfectly otherwise. There are no codes displayed. Do we need to replace the gear assembly? Don’t think it’s the clutch because the agitator moves freely.
For model number MVW7230HW0
PartSelect logo
Hi Rita, thank you for getting in touch. Based on our research, grinding sounds can be due to a worn or rusty drum bearing. The bearing supports the drum and holds it in position while it turns. The drum bearing does not come separately. It comes with the outer tub, part number PS12730826. You may need to replace it to fix the issue. We hope that helps!

Was this helpful?
Thank you for voting!
Related Parts:
Trey
February 5, 2024
My washer started making a grinding noise, at first it was only when agitating when the wash plate would move in the opposite direction as the tub. It's gotten worse to where it grinds in both directions. I've taken out the wash plate and it's not striped, and nothing is stuck between it and the tub. Would this be the gear case making this noise. Doesn't make any noise during spin cycle
For model number MVW7232HW0
PartSelect logo
Hello Trey, thank you for your inquiry. Based on the description that you have provided, the issue is most probably with the gearcase, part number PS16730208. You may need to replace it to fix the issue. Glad to be of assistance!

Was this helpful?
Thank you for voting!
Jason
8 days ago
The washer start making a loud grinding nose the last minute of the wash cycle. The spin cycle is quite with no noise . This only occurs the last 1 minutes of the wash cycles
For model number WTW8127LC0
PartSelect logo
Hi Jason, thank you for reaching out. Based on our understanding, the issue could be with the bearings. They come as a part of the gear case, part number PS16730208. You may need to replace it to fix the issue. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Phil
August 26, 2023
Would the gear case cause the agitator to not move and whine loudly?
For model number MVW7230HW0
PartSelect logo
Hello Phil, thank you for your inquiry. If the gear case is faulty, it can cause the agitator to not move and make noise. Before replacing the gear case, you may need to check the clutch kit. If it is worn out, you may need to replace it. The clutch kit is part number PS10060062. Glad to be of assistance!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS16730208
Manufacturer Part Number: W11449841
Brand
Model Number
Description
Kenmore
11021652020
Washer - Washer
Kenmore
11031652020
Washer - Washer
Maytag
MVW7230HC0
Washer
Maytag
MVW7230HC1
Washer - Washer
Maytag
MVW7230HW0
Washer
Maytag
MVW7230HW1
Washer - Washer
Maytag
MVW7232HC0
Washer
Maytag
MVW7232HC1
Washer - Washer
Maytag
MVW7232HW0
Washer
Maytag
MVW7232HW1
Washer - Washer
Maytag
MVW8230HC0
Washer
Whirlpool
WTW7120HC0
Washer - Washer
Whirlpool
WTW7120HW0
Washer - Washer
Whirlpool
WTW8120HC0
Washer - Washer
Whirlpool
WTW8120HW0
Washer - Washer
Whirlpool
WTW8127LC0
Washer - Washer
Whirlpool
WTW8127LW0
Washer - Washer
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service