Looking for a fix for your Whirlpool kitchen appliance? The CNTRL-ELEC Electronic Clock Control is here to help. Specifically designed for a range of stoves, ovens, and ranges, this official Whirlpool part helps control and maintain precise temperature, keeping your appliance working effectively and efficiently. This well-designed control board checks your ovens heating and temperature for you, ensuring everything is just right. To make your appliance perform like new again, this part delivers perfect electronic clock control. Think of it as the brain of your ovenquietly doing its job so you can do yours. To ensure safety while installing, remember to switch off the appliance and use protective work gloves. And before you hit the order button, do double-check the part number. Though many parts look similar, they might differ in size and shape. This is an original, genuine Whirlpool part, contributing to your appliances durability and efficiency. So why wait? Get your kitchen back to its best with the CNTRL-ELEC Electronic Clock Control.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Daniel P - April 29, 2024
Verified Purchase
appliance repair
Part received by mail on time as promised, Quick and easy install, back in business.
★★★★★
★★★★★
Edward B - April 7, 2023
Verified Purchase
Easy repair
The part was perfect and my range is in perfect repair.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replacing Oven Control Panel
Disconnected electricity and using a Phillip Screwdriver I removed the panel in the back of electric range. I took a photo, pulled the wires off control panel, unscrewed 2 screws to loosen control panel. Replaced with new one, reconnected wires. I reconnected electricity to make sure it was working, then unplug it again after confirming and replaced metal panel behind range. Plug it back, set clock and ready to use. Very easy to do it yourself.
Other Parts Used:
Miguel from Okatie, SC
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
February 1, 2023
Oven , no display lights , oven do not work, oven light do not work.
For model number wfe550sohz1
Hi Robert, thank you for reaching out. You need to check the terminal block, part number PS11750972, the safety thermostat, part number PS11740991, and the electronic control board, part number PS16555205, to fix the issue. We hope this solves your problem! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
The oven kicks off shortly after preheat begins. Never gets hot
For model number WFE550S0HZ1
Hello Dwight, Thank you for writing. We suggest testing the Oven Sensor. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If the Sensor is good, you may have a faulty Oven Control Board. We hope this helps!
Oven seemed to overheat frozen dinner by melting plastic & burning tray before cooking food. Error code F6E1 appeared. After shutting off I found no loose or burnt wires in panel. Put in test mode everything seemed to work. Is control board on the way out ?
For model number WFE550S0HV0
Hi George, thank you for the question. Based on our research, the F6 E1 error code indicates that there may be a problem with the appliance manager, or the associated wiring. We would suggest checking the wire harness first. If it is fine, the issue could be with the oven control board, part number PS16555205. You may need to replace it to fix the issue. We hope that helps!
Was this helpful?
Thank you for voting!
Eric
April 3, 2024
My oven when I'm baking something it will switch from bake to broil and then the temperature goes super high until I turn off and unplug it. This happens randomly. It started about 6 months after purchase and I have had the stove for almost 2 years now.
For model number WFE550S0HZ1
Hello Eric, thank you for your inquiry. Based on the description that you have provided, we would recommend checking the control board, part number PS16555205, to fix the issue. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Kenneth
April 6, 2024
Oven will not work a Err F1 & E0 comes up I tried turning the breaker off for minutes and it still says the same issue
For model number WFE550S0HZ2
Hello Kenneth, thank you for contacting us. Based on our research, the error code F1 E0 indicates that there may be a problem with the oven control, or the associated wiring. We would recommend replacing the control board, part number PS16555205, to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Rick
April 19, 2025
My stove has an error code f1-E0 What do you think is wrong with it? And what part do I need to fix this problem. Thanks Rick
For model number WFE550S0HZ1
Hello Rick, thank you for getting in touch. Based on our research, the error code you mentioned indicates a problem with the oven control, or the associated wiring. We would recommend making sure that the wire harness regarding the control board is intact. If the problem persists, then you may need to check the control board, part number PS16555205, to fix the issue. We hope this helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/Range-Circuit-Boards-and-Touch-Pads.htm"},{"position":2,"name":"W11528249","title":"W11528249","url":""}]
