This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature. The sensor detects the temperature in the oven cavity. If the following symptoms occur, replacing the temperature sensor could be the solution: Little or no heat when baking, oven not heating evenly, oven will not start, and/or oven is overheating. Often, if the sensor is defective, the oven temperature will fluctuate and be inaccurate by more than 50 degrees. The tool needed for this replacement is a #2 square head screwdriver or a #2 Philips screwdriver. Remember to unplug the range before installing the part.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Range Oven Sensor
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Oven is too hot | Oven not heating evenly | Element will not heat
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Greg S - May 30, 2024
Verified Purchase
Oven Sensor Replacement
Recieved the sensor quickly. Exact replacement. Easy fix!
★★★★★
★★★★★
Louis L - May 16, 2024
Verified Purchase
parfais merci !
fonctionne bien .super
★★★★★
★★★★★
Susan K - July 23, 2023
Verified Purchase
Easy Peasy
I can't say enough about the excellent diagnosis and correction. We saved about $200 in not having a service call from a technician. It took us about 15 min to install the two parts. Thank you for the You tube videos. This is the second time we've used your company. Kudos to you!!!
★★★★★
★★★★★
Marilyn O - January 4, 2023
Verified Purchase
Easy repair. Great video instruction.
The part arrived in 2 days(before expected) in perfect condition. Couldn't have been more pleased .
★★★★★
★★★★★
David C - September 18, 2022
Verified Purchase
Part was as advertised
Part arrived quickly and fit as per original part. Install was easy and worked perfect, no issues.
★★★★★
★★★★★
Lori B - April 27, 2022
Verified Purchase
Easy repair
Part came fast and was easy to replace
★★★★★
★★★★★
Rick H - March 5, 2022
Verified Purchase
Easy repair for high temperature fault
Oven was not working due to high temperature fault. The new oven sensor fixed the problem and was easy to install. The part was delivered quickly as well.
★★★★★
★★★★★
Vance M - June 28, 2021
Verified Purchase
Worked as expected.
Quick shipping, easy install. Oven temperature works good again like it should.
★★★★★
★★★★★
Eric M - March 24, 2021
Verified Purchase
Great experience
Great experience with part select, helpful video to accompany the part, which was correct also
★★★★★
★★★★★
Peter L - January 15, 2021
Verified Purchase
Just as ordered.
Part was delivered within a week. Packaged well. Replaced sensor and oven back to normal operation.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 17 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
temperature not accurate after 3 1/2 years of happy usage
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.
The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I turn it to 400 it slowly goes up to 425 degrees.
Other Parts Used:
Ruth from Oregon, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
140 of 259 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven stuck in cleaning mode
Google the error code that the range was displaying and found others with the same symptoms. Then found several people that had fixed the problem by replacing the oven sensor. I then ordered the sensor and replaced it, which fixed the problem.
Other Parts Used:
Hal from Santa Rosa, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
46 of 86 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven bake element would not get hot
1. Turned off power 2.Removed back oven cover 3.Removed power leads to bake element 4.removed retaining screw for sensor. 5.replaced sensor 6.remove bake element cover 7.removed bake element retain screw 8.replaced and reversed process
Repair of oven sensor easy to install; however, product did not resolve the problem. Returned new sensor and awaiting refund (2 weeks passed so far).
Other Parts Used:
Margaret from WALDORF, MD
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
6 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
temp sensor went oven not heating
the hardest part was moving stove to trplace part
Other Parts Used:
patrick from HUGHESTOWN, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven stopped heating, error message stated heating element
Very easy. Pulled the stove away from the wall. Used a screw driver to remove the two nuts to release the heat sensor, disconnected the wire, removed the sensor. Inserted the new sensor, plugged back into the circuit. put the two nuts back. Beware, if the first time you put the oven on, if the error message comes back up (mine did) push the cancel/off button, wait a few minutes, put oven back on. System probably needed to reset. Mine worked perfectly after.
Other Parts Used:
Lana from WATERVILLE, ME
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven sensor was not regulating heat set for oven
Following your installation, the old part came out easily, with new part installing easily., oven heat is being regulated properly..with range pulled out for part replacement, got that area cleaned too
Other Parts Used:
Linda from SAINT CLOUD, MN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven Temp inaccurate
I watched the repair video on this site and another on YouTube before I started. The rear panel has a different shape and two additional screws on the bottom edge. The power clip was easy to manipulate. This was an easy fix for a seventy year-old like me!
Other Parts Used:
David from BURNSVILLE, MN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven not keeping correct temp and sometimes would not relight when temp went dropped.t
Slid oven out and took back shield off unplugged sensor took bracket screw out replaced sensor with new one.
Other Parts Used:
Gary from PLUM CITY, WI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the oven temperature was not working right. I installed a new oven sensor. Works get now
Watch the video...
Other Parts Used:
Rosalind from APOLLO, PA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
119 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Miguel
August 28, 2017
After the oven reach preheat set point we put the food in but just 5 minutes later foods burn up, and came up with a fault detected disable power to clear, which part can be bad? Thanks
For model number gfe461lvs0
Hi Miguel,
Thank you for the question. Sounds like you need to replace the oven temperature sensor. The sensor detects the temperature in the oven cavity. If the following symptoms occur, replacing the temperature sensor could be the solution: Little or no heat when baking, oven not heating evenly, oven will not start, and/or oven is overheating.
Hope this helps!
32 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
January 7, 2018
Why is the temperature 25 degrees less in our oven? Why when the oven is set for 350 does it only reach 325 degrees?
For model number Rf111pxsq1
Hi Richard, Thank you for the question. This sounds like an issue with the Oven Sensor, PartSelect Number: PS11749737.This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature.Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!
31 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
August 9, 2017
How do you test the temperature sensor (probe) with a multimeter?
For model number KERS202BWH0
Hi Jim,
Thank you for your inquiry. To test your probe with a multi-meter. First you must set your meter to the lowest setting. Then calibrate your meter so that the needle is on zero. Disconnect the power to your appliance and then remover your sensor. At the end of your sensor, the little plug in has two separate holes on the inside. Take the probes on each end of your meter, place one in each hole. If your meter stays at zero, your sensor will need to be replaced. I hope this helps!
13 people found this helpful.
Was this helpful?
Thank you for voting!
Greg
November 2, 2017
When my oven preheat alarm goes off, the indicator reads 350 but the oven actual temp is only 250.
For model number WFG231LVS0
Hi Greg,
Thank you for your question. It sounds like you may want to replace your oven temperature sensor. You can test it with a multi meter to double check though. The part should read 0 when tested. If your meter does not move then the part is bad and needs to be replaced. Good luck with your repair.
13 people found this helpful.
Was this helpful?
Thank you for voting!
Ashley
April 26, 2018
I cannot get a multimeter to read my sensor. I ordered a new one and same issue. Could something be shorting it out? Also how do I test my control board to make sure it isn't bad? The oven has been overheating.
For model number MER8775AB0
Hi Ashley, Thank you for the question. You should be able to get a reading on the sensor since it is not installed on the appliance during testing, so if there is a short in the appliance it should not effect the sensor.Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If the oven is not coming on at all I suggest replacing the control board. Unfortunately there is no way to test the board its self but you can see if the board is receiving 120 vac. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
John
April 29, 2018
I have error code F3E0. Is this the oven temperature sensor?
For model number WFG361LVQ0
Hello John,
Thanks for your question. Yes, this indicates an issue with the oven temperature sensor, and it should be replaced.
I hope this helps.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Chera
November 29, 2018
My oven keep burning food and it now has a error code f3e2 not sure what this is. Please help since i cant use my oven for 3 min without the food burning and the alarms going off
For model number MER8775AS
Hi Chera,
Thank you for your question. The F3 E2 error code senses the temperature in the oven is too high and that you may have a failed sensor. You will need to test the sensor with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Marianne
August 8, 2017
What does error code f3e2 mean on the control panel when my oven beeps slowly and constantly until we turn off the oven?
For model number TES325MQ0
Hello Marianne, thank you for contacting us. That code is telling you the electronic control on the range detected a high temperature in the oven. This can be caused by a defective oven temperature sensor or the electronic range control board. You can test the temperature sensor (probe) with a multimeter. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Janey
November 12, 2017
Hello, we had a power surge at our house and now my oven barley heats up. The broiler works and the stovetop works, but the oven does not get above 200 degrees. Do i just need to ordered the baking sensor? Thank you!
For model number MAYTAG mer8775as0
Hi Janey,
Thank you for your inquiry. If the oven is not heating evenly, then you will need to check both the oven sensor and the bake element with a multimeter to verify which part is causing the issue. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Don
August 25, 2017
While trying to bake, the entire stove shuts off. It stays off for a minute of two, and then turns back on, but have lost the oven temp. When i reset the bake temp, oven turns back on for a while, then entire stove shuts off. I suspect the oven does not ever get up to full temperature.
For model number RF362LXTQ
Hello Don, thank you for contacting us. Yes, It does sound like the oven sensor could be at fault. You can test this with a multi-meter. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11749737
Manufacturer Part Number: WPW10181986
