This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
In Stock
Order within the next 11 hrs and your part ships today!
This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperatur...
$120.73
In Stock
Order within the next 11 hrs and your part ships today!
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$26.51
In Stock
Order within the next 11 hrs and your part ships today!
This is a door hinge active with spring, for your range. The hinge controls the opening and closing of the oven door. If your oven door seems to be sticking, you may want to consider replacing this pa...
$74.93
In Stock
Order within the next 11 hrs and your part ships today!
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
$76.05
In Stock
Order within the next 11 hrs and your part ships today!
It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
$43.47
In Stock
Order within the next 11 hrs and your part ships today!
Questions And Answers for WFE535S0JZ0
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
September 1, 2022
Oven light won't go off
For model number WFE535S0JZ0
Hello Michael, thank you for your inquiry. Our research on your model number suggests that the issue is likely to be with the door switch, part number PS11747197. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair!
I have a F1, and a E0 code on my whirlpool range. I think it’s a mother board . Is that right? And can I order one?
For model number WFE535S0JZ0
Hi Walter, thank you for the question. The F1-E0 code indicates that the main control is locked up due to an unexpected communication event. This is often corrected by cycling power. Disconnect power for at least 30 seconds. Re-apply power and observe for at least one minute. If the code re-appears, replace the Control Board, part number PS16555205. We hope this sorts out your problem!
the Duel surface burner on my stove top will only operate on High even when set to low both 6 inch and 8 inch do the same, is the element bad or the switch bad?
For model number WFE535S0JZ0
Hi Wesley, thank you for asking. According to the symptom, it is most likely that the infinite control switches are bad and need to be replaced. The 6-inch infinite control switch is part number PS11740785 and the 8-inch dual element control switch is part number PS11754687. If you require assistance to place an order, please contact customer service. We hope that helps!
This oven when on convection the fan comes on and off every 6 seconds constantly It does get to temp by seem like too much fan cycling.
For model number WFE535S0JZ0
Hi Mark, thank you for reaching out. According to our research, the convection fan frequently turns on and off during the convection cooking cycle. If it seems to do too much cycling, you may need to check the temperature sensor, part number PS11749737, and control board, part number PS16555205. We hope this information helps!
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.
The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I turn it to 400 it slowly goes up to 425 degrees.
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Took 2 screws under front edge of smooth top. Unscrewed ground wire from back of smooth top unit. Unplugged 2 wire bundles, from back. Took bad element out , put in new one. Put back together. About 10 min's tops. Easy peasy.