This part has two ports for water to enter. It is blue and is intended for use with many washing machines and comes with a multi-mount bracket and an outlet adaptor.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Maytag Washer Water Inlet Valve
Troubleshooting
This part fixes the following symptoms:
No hot or cold water | Leaking | Water Filling Issues
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Randall T - February 22, 2019
Verified Purchase
Very quick and easy to complete
Part arrived quickly and in good condition. The part was for an older washer and had been updated with a new design replacement . I was made aware of the issue, and installation was still easy.
★★★★★
★★★★★
Sigrid R - February 13, 2019
Verified Purchase
I'm a 69 year old grandmother and fixed my own washing machine myself. Perfect part.
Very fast shipping - easy to install
★★★★★
★★★★★
Cindy H - August 5, 2020
Verified Purchase
Great part, fits old Maytag seamlessly.
This part is almost identical to the original inlet Valve from my mom's old Maytag. The only thing different is the colours of the orange solenoid plastic. It works correctly and can be adjusted for wiring to go at various 90 degree angles. Thanks for the fast shipping too.
★★★★★
★★★★★
NANCY P - March 28, 2024
Verified Purchase
Easy repair, great part
We were happy to see detailed diagrams for our 40 year old Maytag washing machine on this website. It was good to know the part was verified to fit our model. The part arrived quickly and in good condition. The repair went smoothly and the machine has been working well with no leaks for the last few weeks.
★★★★★
★★★★★
Sharon R - June 19, 2020
Verified Purchase
Fast delivery, part exactly what we needed.
We were delighted that we could get a part for our old Maytag washer. We live in a small town, and it is difficult to get anything. The part was delivered very quickly, and we were able to get our washer up and running. We also appreciated the video that explained how to replace the part.
★★★★★
★★★★★
Martin S - November 30, 2023
Verified Purchase
Saved
Part arrived on time and fit perfectly
★★★★★
★★★★★
Diane C - March 20, 2020
Verified Purchase
Great part, fast service!
My 1982 washer is back in working order!
★★★★★
★★★★★
Perry H - October 22, 2021
Verified Purchase
Ditto
Ditto
★★★★★
★★★★★
Jeremy H - May 27, 2021
Verified Purchase
Worked great
The right part came quickly and my washer now works. What more could I ask for?
★★★★★
★★★★★
John S - June 29, 2023
Verified Purchase
good part
fast delivery
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 87 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Cold water valve only opened to a trickle
I started by unplugging the appliance and then shut off the hot and cold water faucets then I disconnected and drained the hoses. Next, I removed the two screws that held the valve assembly in place. I then pulled the assembly out about 3 inches and disconnected the two wire plugs. The last step was to loosen the hose clamp on the outlet hose and pull off the outlet hose. I reversed the steps to install the new assembly and the total repair took about 10 minutes.
Other Parts Used:
Brian from El Cajon, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Wrench (Adjustable)
596 of 611 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer filled with water even when OFF.
Followed your directions and it went very easy. Only took maybe 30 mins. I was impressed with your trouble shooting and inst!!!!
I moved wash machine away from wall and unplugged from wall outlet. Shut off water, then removed hot and cold water lines from water inlet valve,removed screw from mounting plate and removed valve from wash machine. Checked to see if replacement valve was compatible (exact fit). Unscrewed the two screws holding valve to mounting plate,unscrewed hose clamp and removed water line at top of valve (outlet). Removed the four wires from solinoids.Replaced the four wires onto the new valve as they were on the old valve,reattached water line onto the top of valve and tightened.Reattached valve to mount plate with the two screws and mounted back onto machine. Hooked up hot and cold water lines back onto valve and snugged with pliers. Turned on water checked for leaks (no leaks), and did a load of laundry. Super simple,well worth doing yourself.
Other Parts Used:
Erich from EastHampton, CT
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
44 of 50 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cold water would not flow into the washer
After verifying that the supply wasn't the problem, I ordered the replacement inlet valve module.
1) shut off water to machine 2) removed the hose connections from the valve 3) unplugged the washer 4) removed the plate holding the module - 1 screw 5) removed the hose clamp from the valve module to the washer inlet 6) removed the two screws holding the valve module to the plate 7) removed the 2 wire connections to each of the two solenoids. 8) Reversed all of the steps above for the new valve module. 9) checked for leaks
Other Parts Used:
john from friendswood, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
30 of 35 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cold water barely flows, hot is ok
These Maytag people know how to build stuff. I was impressed with this valve. Built really smart. After a gazillion years (about 16 or so) the valve started making a funny groaning noise and the cold water flow was very slow. Took about 15-20 minutes to fill the tub.
the inlet valve is located on the back of the washer where the hoses are connected. In fact the hose connectors are part of the valve.
To replace this valve, start by unplugging and turning off the water spigots, unscrew the two hoses from the valve. (you need a towel here, but that'll be obvious soon enough.)
Unscrew the single screw at the top of the valve bracket (the bottom of the bracket is held in place without screws.) Remove the screw holding on the sheet metal and pull the bracket out as far as you can without stretching things. Write down what colors of wire are connected, then pull off the electrical connectors.
The valve outlet is a skinny (compared to the inlet hoses) rubber hose that has a clamp to hold it in place. The clamp needs to be loosened with a 3/16" nutdriver a plier would probably work, but may be hard to get in there. Now slide the clamp further up on the hose, dislodge the rubber hose off of the old valve. Now it's free.
Reverse the steps. Believe it or not, that is all. It works great and this washer probably has another 10 year left in it.
Other Parts Used:
James from Bedford, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
26 of 27 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No hot water
Went on the PartSelect website, input the problem, and got the Water Inlet Valve as the diagnosis. When the part arrived, I viewed the short video on replacing the Water Inlet Valve and just followed the instructions. It could not have been easier. After turning off both the hot and cold water and pulling the plug from the wall socket, I removed the screw holding the bracket and valve to the machine; removed the 2 screws holding the valve to the bracket; removed the wire harness ends from each solenoid on the valve; replaced the valve with the new one and reattached the wire harness, followed by reattaching the bracket to the valve, and assembling to the machine.
Other Parts Used:
Joel from New Canaan, CT
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
16 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water inlet valve failed
Disconnect the water lines. Remove two screws that hold the water valve to the back of the machine. Pull the water valve out and remove the panel that holds it on to the machine. Remove the water line from the valve to the wash tub. Remove the four wires from the valve remembering where each one goes on the new unit. Attach the valve to tub hose to the new unit. Attach the four wires in the proper order to the new unit . Screw the metal holding panel on to the valve. Push the unit in place and reattach with the two screws. Attach the water lines and use the machine. Remember to unplug the machine prior to changing the valve
Other Parts Used:
Lawrence from Eau Claire, WI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
14 of 16 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The fill cycles would start then stop suddenly
This was an easy repair. 1st I removed both water hoses 2nd I removed 1 hex head screw that released a backing plate & removed the plate holding the water inlet valve. 3rd I pulled the 4 electrical connections & loosened a clamp to remove a small water hose. 4th I removed 2 hex head screws that held the water valve to the backing plate. -----------that was a whole 5 - 10 minutes!------------ Next I reversed the process 4th I attached the inlet valve with the 2 hex head screws 5th re-attached the 4 electrical connections(had slip on spades) pushed on the hose & tighterned the clamp. 6th replaced the backing plate with the inlet valve attached & tightened the single hex head screw. 7th re-attached the hot & cold lines................................DONE 15 minutes tops
Of couse, turn off water to machine. Remove hoses. Then had to open unit - easiest by popping spring in with flat blade in seam under lid. Screws holding valve are on back of unit at hose inlet, so simply unscrew to remove failed valve. Clamp holding hose onto valve is crimped with pliers to remove. I suggest spending the 50 cents a hardware store for new clamp, as my reattachment of existing clamp onto new value leaked. There are four electrical connectors, so remember order in which you removed them and return to same on new unit. Reassemble in reverse (hoses, water on) and your all set. Pretty easy: I figure it would be about $200 for service guy and part. My cost: $30 and 30 minutes
Other Parts Used:
Robert from Geneva, IL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
8 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
18 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lucy
April 17, 2018
My washer fills slowly with cold water when it is not on. If I put my finger under the rim inside the tub, it is wet. I've got the problem under control by turning off the cold water at source when not in use, but I'd like to fix it, if possible!
For model number A712
Hi Lucy, Thank you for the question. This would be an issue with the Water Inlet Valve, PartSelect Number: PS1583805. The valve can become stuck open and allow water to leak info the tub when not in use. Hope this helps!
24 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
October 7, 2017
Hi lid switch was bad because of solenoid. Part is unavailable so bypassed lid switch. The machine will not fill with water on start up but will do rinse cycle. The water inlet switch is new. Did i louse up something bypassing the lid switch. Thankstom
For model number LSE7800ACL
Hi Tom,
Thank you for your inquiry. If your washing machine is not filling with water then you may have check the continuity of the lid switch to see if it is working correctly. A lid switch that is not working correctly can cause this issue. I hope this helps. Thank you and have a great day!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Todd
March 30, 2018
Hello, the warm and hot water fill for wash cycles but no cold water for the wash and rinse cycles. I removed some sediment in the screens but still no cold water. Cold water flows through the fill hoses...thanks!
For model number A482
Hi Todd,
Thank you for your question. It sounds like the cold water solenoid might be broken on your valve. You can test the part to see if that is the case, but it sounds like you will need to replace your valve. I hope that helps. Good luck with your repair.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Stu
April 25, 2018
Tub overflows when not in use. I use only cold water with hot turned off at source, would that be the problem? Thank you
For model number LA112
Hi Stu, Thank you for the question. This sounds like an issue with the Water Inlet Valve, PartSelect Number: PS1583805. The valve may have become stuck open and is allowing the water to flow through when not in use. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Rich
April 4, 2019
I have no selection of water mixture. I only have warm/cold. When i switch it to any of the others like hot/warm, cold/cold etc the water just trickles in. What could be the problem?
For model number A9400
Hello Rich, Thank you for the question. This sounds like an issue with the temperature Switch, PartSelect Number PS2017425. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Milon
April 22, 2019
I have a top loading Amana washer that the hot water constantly run is it the inlet valve stuck open
Hello Milon, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
September 5, 2023
since replacing the cold water hose the water temperatures are no longer what the 4 switches say they should . ie; cold/cold now gives out hot only and other 3 screwed up to . Help
For model number LAT7800ABW
Hello John, thank you for getting in touch. To help you replace the water inlet valve correctly, we have attached a relevant video to help you with the process. It will resolve the hot and cold water issue. Glad to be of assistance!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tom
May 8, 2023
Washing machine leaks water onto floor, but only when warm water is used. Does not leak water on cold/cold cycle.
For model number A512
Hi Tom, thank you for reaching out. We would recommend checking for any kinks/damages to the hoses and tightening any loose connections. If that does not help, then the issue is most likely related to the water inlet valve, part number PS1583805. We hope this sorts out your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
May 24, 2019
While the tub is filling water runs out of the crack between the cabinet and the top in the left rear corner right above the water inlet valve.
For model number LAT9593AAW
Hi David, thank you for your question. It sounds like you might want to inspect your valve to see if it is broken or if the hoses that attach to it are broken and need to be replaced. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Michael
August 19, 2019
No hot water. I replaced the water inlet valve, hose and strainer. Problem persists. What do you suggest? Submitted this a few minutes ago but forgot to include the model #
For model number LAT9593AAW
Hello Michael, Thank you for the question. This sounds like an issue with the temperature switch, PartSelect Number PS2017425. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1583805
Manufacturer Part Number: 205613
