Whirlpool/Whirlpool_Thumb/0XW0IVKY.gif
See part 8 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.ca

Hub Gear

★★★★★
★★★★★
36 Reviews
$27.15   On Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS12348886
Manufacturer Part Number W11192795
Manufactured by Whirlpool
Product Description

Hub Gear Specifications

Includes both the attachment and beveled gear. This worm follower gear is for stand mixers. Worm follower gear meshes with the worm gear, causing the rotation of the planetary assembly where the accessories attached. Unplug the mixer before installing this part. Wear work gloves to protect your hands.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Touchpad does not respond
This part works with the following products:
Mixer.
This part works with the following products:
KitchenAid, Whirlpool.
Part# W11192795 replaces these:
AP6286924, 4161404, 4161405, 4169868, 9703337, 9703338, W11044501, W11175144, WP9703337, WP9703338
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

7 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Ken
    June 12, 2019
    Does this order come with both bevel & hub gears (shown in the photo) for $16.29?
    For model number 9703337
    Hello Ken, thank you for your question. Yes, this includes what is shown in the picture.

    8 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Hank
    March 13, 2018
    I need the main drive gear that is operated by the motor. I believe the part number is apart number 18. It’s the gear that is about 1.25 inches in diameter and about 1/4 inch in height. What is the cost of this gear?
    For model number kp26m1xpm
    Hello Hank, thank you for your question. The gear that is attached to the motor shaft is item # 18 part number WP9709231. Then there are two gears that turn on the shaft of the gear I just mentioned. Part number W11086780 and W11192795. There might be some pictures of the parts you can find online, as we unfortunately, don't have pictures on our site at this time. I hope this helps!

    4 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Dan
    June 26, 2019
    Does the gear hub replace part # 8 and 5 from the picture of the mixer parts? Both of the gears sheared on my mixer.
    For model number 4KP26M1XLC
    Hello Dan, Thank you for the question. Yes, this Includes both the attachment and beveled gear. Hope this helps!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Martin
    May 20, 2019
    Hello i need to replace the worm gear and hub gear in a kitchen aid professional 550 hd would you have these in stock?
    For model number KV25MCXER
    Hello Martin, thank you for inquiring. For your model this Hub Gear is the correct replacement. The Worm Gear is part PS12070620.

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Jeff
    May 7, 2019
    Need to replace the gear hub gears on my mixer. Just confirming if this part is the correct one for my mixer. Part # ps12348886
    For model number kp26mixmr
    Hi Jeff, Thank you for your question. Yes, this would be the correct hub gear for your mixer. I hope this helps. Thank you and have a great day!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Pamela
    February 7, 2020
    So these parts fit this stand lift mixer?
    For model number 4KV25H0XER5
    Hi Pamela. Yes this part fits mixer 4KV25H0XER5. Thank you for your question and good luck with your repair.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Lisa
    April 23, 2018
    The piece that holds the beater shaft was loose and fell out exposing the gears. What parts do i need to repair this?
    For model number KV25G0XMC
    Hi Lisa, Thank you for your question. I believe that would be your planetary. You should be able to find that part in your Color and Variation Parts diagram. I hope that helps. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 4.0 / 5.0, 18 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Plastic gear housing in stand mixer fractured causing gears to crash
      Removed four screws to remove main cover. Removed four more screws to remove fractured plastic gear housing cover. Removed retainer ring and slid two gears and dowel off main shaft. Lifted out remaining gear train and bearings, Removed all grease and metal chips from all components. Greased new gears and reassembled. Replaced plastic gear housing cover with oreviously purchased die cast replacement part. Assembled main cover.
      130 of 178 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      mixer does not mix 4 cups of flour with 6 eggs very easily
      sat on the kitchen table and with a screwdriver started to disasemble the mixer,hardest part was taking snap ring off (easy after you buy snap ring pliers)as gears were lifted off noticeable wearing was present on all parts. the bearing housing on the gearcase was broken lose, the only major expense. the other parts are not expensive so i decided to renew all parts. glad i did felt proud of myself when job was done. would do it again Joe
      34 of 84 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      I stripped two gears to the power take-off at the head of the mixer using the meat grinder attachment.
      I investigated the problem by opening the mixer (four screws) and examining the gear box. Two gears were stripped. I ordered them, using the parts diagram provided. They arrives in about two days. I disassembled the gear box, cleaning out all grease and inspected for further damage. The gears and housing were completely cleaned with solvent. The transmission was then reassembled and regreased with food-grade grease. The mixer is now reassembled and working well. I was very pleased with the price and simplicity of my repair, versus taking it to a repair shop.
      • Raymond from Monterey, CA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        W11192795, W11192795
      32 of 34 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Plastic gear housing breaking
      Very happy to find that the new gear housing was metal, not plastic. The whole problem was poor design of plastic to hold metal gears. Removed housing held down by four screws, removed two gears that were damaged. Retaining ring was difficult to remove from retaining slot. New gears replaced the old ones, new retaining ring put in place, new grease packed into all gearing, new stronger metal housing put in place and the Kitchenaid industrial mixer is better than new. Very happy with the parts I purchased.
      24 of 26 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Stripped gear teeth
      Removed rear band screw and band
      remove 4 screws from head assembly and remove mixer head
      remove 2 screws fastening speed control switch
      remove 4 screws from gear box cover
      remove cover and slide out bevel gear and replace
      remove retainer ring and slide gear off shaft.
      reassemble in reverse order, apply grease to gear teeth.
      first time 25 minutes to inspect and reassemble
      2nd time 5 minutes to teardown,replace parts, and reassemble
      All manufactured assemblies should be this nice to work on.
      • Roger H. from Polo, IL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      • Parts Used:
        W11192795, W11192795
      18 of 20 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      bevel gear, bearings and housing replacement
      The parts I received from PartSelect were higher quality than the original parts. The bevel gear and housing were originally plastic. The new ones are solid metal. The machine sounds and runs better than it ever did. The drawings from the website made this really easy. This will be my first choise for parts from now on.
      12 of 18 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      gears broke
      remov5 screws then snap ring thenn 4 screws then reploace with new parts and put back together
      12 of 38 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      grinding, wouldn't turn
      Took it apart, found stripped gears, a common problem. Reviewed parts diagram on your website. Got the parts, reviewed the diagram, removed defective parts, used retaining ring pliers. put it back together, put new grease in, tried it out. Very easy fix
      4 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Household (stand) mixer making weird noise
      Removed 4 screws on mixer top. Removed 4 screws to gear box cover. Ordered replacement gears from Parts Select. Removed snap ring. Repaced two gears. Applied gear grease, replaced snap ring & screws. Gears at local appliance dealer were $39 each. Total parts from Parts Select + shipping under $20, received in 3 days!
      • Linda from Anchorage, AK
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        W11192795, W11192795
      4 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Worm gear had stripped so changed out several gears and parts
      Opened the gear housing and removed all gears. Cleaned out all grease. Biggest issue was getting the retaining ring; very tight. Gears were difficult to pull easily. In replacing gears they did not sit easily and took a little rubber hammer to re position worm and upper gear. Be sure to have the right grease for food devices and don’t under grease. And have patience of which I have a short supply.
      2 of 2 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      36 Reviews
      4.9
      Filter By Rating:
      • 5 Stars
        34
      • 4 Stars
        1
      • 3 Stars
        1
      • 2 Stars
        0
      • 1 Star
        0
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS12348886
      Manufacturer Part Number: W11192795
      Brand
      Model Number
      Description
      KitchenAid
      4KB25G1XBU3
      Mixer
      KitchenAid
      4KB25G1XBU5
      Mixer
      KitchenAid
      4KB25G1XBY5
      Mixer
      KitchenAid
      4KB25G1XCO5
      Mixer
      KitchenAid
      4KB25G1XER3
      Mixer
      KitchenAid
      4KB25G1XER5
      Mixer
      KitchenAid
      4KB25G1XGA5
      Mixer
      KitchenAid
      4KB25G1XMC5
      Mixer
      KitchenAid
      4KB25G1XMY5
      Mixer
      KitchenAid
      4KB25G1XOB3
      Mixer
      KitchenAid
      4KB25G1XOB5
      Mixer
      KitchenAid
      4KB25G1XTG3
      Mixer
      KitchenAid
      4KB25G1XTG5
      Mixer
      KitchenAid
      4KB25G1XWW3
      Mixer
      KitchenAid
      4KB25G1XWW5
      Mixer
      KitchenAid
      4KD2661XMC3
      Mixer
      KitchenAid
      4KG25G0XMC4
      Mixer
      KitchenAid
      4KG25G0XWH4
      Mixer
      KitchenAid
      4KG25G7XER4
      Mixer
      KitchenAid
      4KG25G7XOB4
      Mixer
      KitchenAid
      4KG25G7XSL4
      Mixer
      KitchenAid
      4KG25G7XWH4
      Mixer
      KitchenAid
      4KG25H3XER5
      Mixer
      KitchenAid
      4KG25H3XOB5
      Mixer
      KitchenAid
      4KG25H3XSL5
      Mixer
      KitchenAid
      4KG25H3XWH5
      Mixer
      KitchenAid
      4KN15C1XER1
      Mixer
      KitchenAid
      4KN15C1XMC1
      Mixer
      KitchenAid
      4KN15C1XOB1
      Mixer
      KitchenAid
      4KN15C1XWH1
      Mixer

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service