Includes both the attachment and beveled gear. This worm follower gear is for stand mixers.
Worm follower gear meshes with the worm gear, causing the rotation of the planetary assembly where the ac...
This wire whip attaches to your stand mixer and is used for whipping food products. It is made of metal wire and is one of several attachments that you can add to your mixer. If you attempt to start y...
This assembly includes the black knob. Used with Stand Mixers.
$111.60
In Stock
Questions And Answers for 4KG25H3XSL5
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sue
March 26, 2020
Hi my kitchen aid will not turn when i turn it on makes a grinding noise i was told it was the gear if this is so is there only one gear and which is the correct one to buy for this model kitchen aid hd thank you
For model number 4KG25H3XSL5
Hello, Thank you for your question. You will want to check the Hub Gear- Part #: PS12348886, Worm Gear- Part #: PS12070620, and Worm Gear- Part #: PS11747012. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Doug
January 16, 2024
Mixer is dropping small black bits into the bowl, not sure what they are, it has been suggested that a new seal on the gear housing should fix the problem. Given its age (15 years) would it be advisable to replace other parts while I have it apart.
For model number 4KG25H3XSL5
Hi Doug, thank you for reaching out. The substance you are seeing is grease. This happens when the grease gets older and loses viscosity. We would recommend putting some grease on the on the planetary gears to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Doug
January 17, 2024
Do you put grease in the final drive- bellow the main gear assembly?
For model number 4KG25H3XSL5
Hello Doug, thank you for getting in touch. We suggest opening the case to check the grease. If most of the grease was lost, it will be a good idea to have the grease replaced. We have attached a relevant video that will help you in replacing the grease. The video may not be of the same exact model but will help you with the process. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
removed metal strap around motor housing then remove the 4 screws holding top motor cover on, then removed the 4 screws that hold gear cover in place, remove long gear that is driven by the motor gear, then with ring pliers remove ring off long drive shaft and lift off worm gears. once all gears are removed --removed all the old grease ( do this to get all the metal shavings out from the failed gear) repace the grease in the gear housing and reassemble in reverse order
1, Removed trim piece (1 screw) 2, removed cover (4 screws) 3, removed speed switch assembly (2 screws) 4, removed gear cover (4 screws) 5, removed and examined 2 worm gears for wear. Gear cover was badly cracked, don"t know if it was caused by a previous repair or by heat, as old cover is plastic. Received new parts and installed them, 2 bearings, 2 worm gears, 1 new cover of diecast metal and a new gasket. All repairs made with a #2 phillips screw driver. My wife then made bread, and it preformed flawlessly.
Removed four screws to remove main cover. Removed four more screws to remove fractured plastic gear housing cover. Removed retainer ring and slid two gears and dowel off main shaft. Lifted out remaining gear train and bearings, Removed all grease and metal chips from all components. Greased new gears and reassembled. Replaced plastic gear housing cover with oreviously purchased die cast replacement part. Assembled main cover.