Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Brian B - September 15, 2021
Verified Purchase
Easy repair, worked like a charm!
I received the part ahead of schedule. The replacement took me 5 minutes and the light is working again!!Thanks PartSelect!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 7 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Freezer light(s) were not coming on when freezer door was open
The PS11767930 BOARD LED LIGHT Assembly was an exact match to the one that had gone bad. First, I removed the shelf above the light cover and items on it. Next, remove the top 1/2 in phillips head screw holding the light cover in place. Next, pop off the light cover(2 slots on each side and 2 on back freezer wall. Next I popped off the plastic snap on holder at the end of the wires that contained the board LED lights. Then remove the wire plastic connection by holding it with needle nose pliers and a small screwdriver to lift up the plastic snap in connector. Take the new board and attach it just like you removed the old one. Let there be light! And so it was.
Other Parts Used:
Gordon from JACKSONVILLE, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
11 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No freezer light
Unplugged the fridge, and opened the freezer. Unscrewed the light panel, small screwdriver. Removed the plastic bracket. Part was frozen and I broke one of the plastic mounts. Do not do this as I am not sure if I will have to live with my cable twist tie kludge or I can get another plastic bracket. Light board is just the PCB. You need to remove the old PCB and install the new one- remember the orientation and the fact that the plastic mount piece has specific sides you can identify by the width of the slots. This is for all the other women like me. Thanks.
Other Parts Used:
Lisa from San Jose, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
LED light board burnt out second time replaceing.
unplug refrige take off light cover unplug lightbar and take lightbar off bracket put new LED lightbar back on the bracket and attatch back on back wall of freezer put light cover back on plug in refrige done.
Other Parts Used:
JAMES A from COLUMBUS, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer Light Board was bad
Had to remove a couple of shelves, then used a Phillips screwdriver to remove the Light diffuser then removed the "light board" assembly and unplugged the light board, plugged in the replacement board, snapped the board back onto its mounting bracket, then snapped the bracket back into its place and then replaced the light diffuser and screwed it back in place. Replaced the 3 shelves and the food which I stored in our chest freezer while I did this repair. I'M DONE !!!! Pretty easy. The switch was OK. Didn't need replaced. Then I plugged in the refrigerator. NOW when we open the freezer door; LET THERE BE LIGHT !!!!!! Sunglasses are needed now!!!
Other Parts Used:
Hal from CONROE, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator inside light 1 of 3 went out.
1. Removed light cover. 2. Removed old light assembly board from cable, (1 of 3 lights). 3. Connected cable to light assembly board. 4. Replace light cover. 5. All 3 lights fully lighted. 6. Installation Completed.
Other Parts Used:
Joseph from SAN JOSE, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
L.E.D. light board burned out.
Using my putty knife, I slid it under the light cover prying upward to remove it. I then unplugged the the light board from the wire and unsnapped from the two prongs. Then reinstalled.
Other Parts Used:
Richard from HARWICH PORT, MA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
LED light board assembly failed in freezer section
Clear freezer items in the area of repair as light assembly is in the back of the freezer. Suggest removing shelving in the same area to provide more working space. Utliize a small flashlight to provide interior lighting. Use a stubby phillips screwdriver to remove fastener securing the light cover. Cover snaps out to remove light board assembly. Gently pull to disconnect the electrical connection to the light board. Then pull the light board assembly from the mounting posts securing the light board. Be careful not to snap either posts or the light board. To install the new light board, I found it easier to connect the electrical source first, then push the light board onto the plastic posts to secure the light board. There are holes in the light board to insure a secure fit. Reinstall the light cover and reinstall the mounting screw. All done in less than 5 minutes!
Other Parts Used:
John from MANCHESTER, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
15 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rick
August 9, 2019
What is the correct part number to replace a faulty light in the freezer compartment?
For model number GSE25gshjcss
Hello Rick, thank you for your question. The light board in the freezer is PartSelect Number: PS11767930. Please enter the part number into the site for current price and availability. Good luck with your repair!
13 people found this helpful.
Was this helpful?
Thank you for voting!
Dean
October 12, 2021
How do i remover this light board from the back panel of the freezer
For model number GSS25GGHLCWW
Hello Dean, thank you for your question. First unplug the refrigerator. Disconnect the cover by pulling it down from the back. Disconnect the wire going the light assembly. Then press the tab to remove the light board. To install the new assembly position it over the post and snap it into place. Connect the wire connector and replace the cover. We hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Nancy
June 25, 2021
What is the part number for the freezer replacement light board? Can we replace it ourselves? It failed to work after 15 months of use! Thank you.
For model number GSE25HMHJHES
Hi Nancy,
Thank you for your question. The part number listed under your model number for the freezer light board assembly is PS11767930. This repair is rated as fairly easy and there instructions listed with the part on our website if you need to reference them. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! Good luck with the repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bob
December 6, 2022
does the wr55x26671 light strip fit the refrigerator side llght in the model listed
For model number gzs221ynfs
Hi Bob,
Thank you for your question. This light board assembly can be used in both the freezer and fresh food sections. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Donald
November 6, 2018
Will i be able to replace this part
Thanks
For model number WR55X26671
Hello Donald, In most cases previous customers have been able to do the repair on their own. This depends on the DIY'er. Hope this helps, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
March 7, 2022
what is the part number for the freezer light?
thank you
For model number GSE25GSHNCSS
Hello Mark, Thank you for your inquiry. We have researched the model number you have provided and confirm that the freezer led light board is part# PS11767930. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Glenda
April 4, 2024
The light in the freezer section is not working. What kind of bulb do I need to replace?
For model number GSS25GMHLCES
Hello Glenda, thank you for reaching out. The compatible LED light board for the freezer section is part number PS11767930. You may need to replace it to fix the issue. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Harminder
February 9, 2023
How can I diagnose if the freezer light circuit board is faulty.
My freezer light does not come on when I open the door
For model number GSE25GSHPCSS
Hello Harminder, thank you for asking. We have a video on how to test for continuity. WE also have a customer posting on how they did the repair that may help you with locating the part. "" Had to remove a couple of shelves, then used a Phillips screwdriver to remove the Light diffuser then removed the "light board" assembly and unplugged the light board, plugged in the replacement board, snapped the board back onto its mounting bracket, then snapped the bracket back into its place and then replaced the light diffuser and screwed it back in place"" We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Len
February 17, 2023
How do I remove the Light Board in the Freezer???
For model number GSS25GMHKCES
Hello Len, thank you for your question! First, unplug the refrigerator. Disconnect the cover by pulling it down from the back. Disconnect the wire going to the light assembly. Then press the tab to remove the light board. To install the new assembly, position it over the post and snap it into place. Connect the wire connector and replace the cover. We hope this helps.
Was this helpful?
Thank you for voting!
Diana
March 19, 2023
What part is needed for the light board in the freezer right above the first shelve in the freezer. The lights are out on the top of the freezer to lights on the lower half on the wall of the freezer are working fine. How easy is the install?
For model number PZS22MSKPHSS
Hello Diana, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11767930. First unplug the refrigerator. Disconnect the cover by pulling it down from the back. Disconnect the wire going the light assembly. Then press the tab to remove the light board. To install the new assembly position it over the post and snap it into place. Connect the wire connector and replace the cover. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11767930
Manufacturer Part Number: WR55X26671
