CZS22MSKEHSS General Electric Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Ice and Water Filter – Part Number: MWFP
$94.45
Special Order
Refrigerator Ice and Water Filter
★★★★★
★★★★★
(19)
Part #MWFP
This ice and water filter helps reduce impurities in select side by side and bottom freezer refrigerators. Replace it about every six months, or when water flow slows, ice production drops, or the filter light turns red. Some older filter setups may need an adapter. Place a cloth under the filter before removal. Check the exact refrigerator model before ordering.
Temperature Sensor – Part Number: WR55X10025
$34.68
Special Order
Temperature Sensor
★★★★★
★★★★★
(10)
Part #WR55X10025
Also known as a thermistor. This part is used to sense the temperature in the cabinet.
Module Shelf Insert - Clear – Part Number: WR71X10761
$64.23
Special Order
Module Shelf Insert - Clear
★★★★★
★★★★★
(13)
Part #WR71X10761
The Module Shelf Insert is a complete assembly for the module shelf. This repair is rated as "Easy" by users. Simply remove the old shelf insert and snap the new one into place using the locking tabs. This part is used to hold items in the fridge, and if broken it should be replaced. Refer to your user manual and model number to ensure this part is right for you.
Union Connector - 5/16 Inch to 5/16 Inch – Part Number: WR02X11330
$23.79
Special Order
Union Connector - 5/16 Inch to 5/16 Inch
★★★★★
★★★★★
(1)
Part #WR02X11330
Quick connector for plastic water line - 5/16" to 5/16"
Water Tank Assembly – Part Number: WR17X11440
$59.40
Special Order
Water Tank Assembly
★★★★★
★★★★★
(32)
Part #WR17X11440
This tank stores water until the water actuator is activated and water is requested.
WATER VALVE WITH GUARD – Part Number: WR57X33326
No Longer Available
WATER VALVE WITH GUARD
★★★★★
★★★★★
(8)
Part #WR57X33326
This double inlet water valve has quick connections. This valve has 1/4 and 5/16 John Guest fittings for the outlet lines and a 1/4 compression fitting for the inlet line.
Evaporator Fan Grommet - Red – Part Number: WR02X12008
$16.74
Special Order
Evaporator Fan Grommet - Red
★★★★★
★★★★★
(5)
Part #WR02X12008
This evaporator fan grommet is red in color, and is about 1 inch in diameter.
Compression Ring – Part Number: WR02X12149
$13.95
Special Order
Compression Ring
Part #WR02X12149
Recess Door Spring – Part Number: WR02X10585
$13.95
Special Order
Recess Door Spring
★★★★★
★★★★★
(3)
Part #WR02X10585
This door recess spring or dispenser lever spring in your refrigerator is used to return the ice door to the closed position or the dispenser lever to the home position once released. You will find the spring in the water dispenser assembly, behind the main control panel. If the dispenser lever is malfunctioning or the dispenser ice door is not closing, you may need to replace this door recess spring.
Plastic Tubing - 5/16 Inch – Part Number: WR17X2891
$47.57
Special Order
Plastic Tubing - 5/16 Inch
Part #WR17X2891
This part is the replacement water line for your refrigerator. It is a long plastic tube, which is 5/16 of an inch in diameter. If your refrigerator is leaking, or will not dispense water or ice, you may have a damaged water line. When you replace the water line, you may want to pick up a new water tube union as well. You can use a utility knife to cut the old water line where it is damaged, and use the union to attach the new water line to the old one. This tubing is sold individually and is an OEM part.
Screw - 8-18 DG TRT20 5/8 S – Part Number: WR01X10621
$13.95
Special Order
Screw - 8-18 DG TRT20 5/8 S
Part #WR01X10621
This genuine OEM screw is designed for use in refrigerators. It measures approximately ¾ of an inch in length.
Refrigerator Door Shelf Bin – Part Number: WR71X10973
$134.81
Special Order
Refrigerator Door Shelf Bin
★★★★★
★★★★★
(2)
Part #WR71X10973
Sold individually. This door bin is for refrigerators. Door bin attaches to the inside of the refrigerator door and typically holds jars and bottles. Follow the instructions in the owner's manual for installing this part.

Questions And Answers for CZS22MSKEHSS

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John - For model number CZS22MSKEHSS
January 15, 2020
Changing the water filter
Chris Boyle Profile
Hello John, Thank you for your question. The water filter for your model is under part PS8746144 and it has been updated by the manufacturer, if you haven't replaced your water filter before, you may also need the adapter under part PS220347 for your model for it to fit. We suggest watching the installation video on the water filters part page for guidance in installing the new water filter. We hope this helps.
$27.84
Special Order
Water Filter Adapter
$94.45
Special Order
Refrigerator Ice and Water Filter
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Bette - For model number CZS22MSKEHSS
July 3, 2023
How do I get replacement freezer door gasket?
Chris Boyle Profile
Hello Bette, thank you for the question. The freezer door gasket that fits in your model is part number PS8758486. We hope this helps!
$91.39
Special Order
Freezer Door Gasket - Black
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the CZS22MSKEHSS

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigertor water dispenser not working BUT ice machine is working
1038 of 1163 people found this instruction helpful.
  • ralph from bristow, VA
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers, Socket set
The very first symptom here is important! The door water dispenser is not working but the ice macine is working. You may only have a frozen water tube in the door so do the following before diagnosing that your solenoid valve is bad: 1) the tube usually runs under the front of the refrigerator and usually has a quick disconnect. Undo t he connection and press the dispenser. If water comes out of the tube you have a frozen or blocked tube in the door. 2) Immediately adjust the temperature in the freezer and warm the freezer compartment as much as you can without destroying the freezer contents. Wait 24 hours. This will usually unfreeze the line. Do not waste your time with a hair dryer. NOW, if this doesn't work and you are convinced you need to order and replace the solenoid, follow these steps. Assemble your tools first. I needed a good ratchet set and a screwdriver. A shop towel is helpful for spilled water. A light is handy. Pull out the refreigerator to gain access to the rear of the unit. Unplug the power and close the water valve (older homes, you may need to actually shut the house water supply). Remove the screws which hold the cover over the lower half of the refrigerator. On the left you will see the solenoid. It's always good to see that your new part matches the one you feel needs replaced. They may not match perfectly due to changing design but they should be very similar. One screw holds this part in place and access is very simple. Now simply unplug the electrical connections. In my case, one blue "blade" type connection (powering the water) and one red "blade" type connection powering the ice maker. They are not the same size and this coupled with the coloring means you will not accidently switch them. pull the tubes clear of the solenoid. This is simple and needs no explantion. Grab your new solenoid and reattach both the electrical and water lines (two, remember, ice maker and drink dispencer). Replace the single screw. Re-attach the rear, lower refrigerator cover and go to the front of the unit to check the water. You can listen carefully and hear the power engage from the new part bringing you water. Clean up, replace the refrigerator back to its place and look really tired when your wife sees that you worked "so hard"! You probably saved at least $50-$80 from a service call which can now be used to take the family to dinner after your "exhausting" 15 minute workout of removing about 10 screws and wheeling the unit in and out of place. Writing this article took longer! My 4 year old worked harder holding the flash light!
Was this helpful?
Thank you for voting!
Fridge too warm, evaporator icing up
606 of 738 people found this instruction helpful.
  • Gerald from San Clemente, CA
  • Easy
  • 15 - 30 mins
  • Screw drivers
After replacing the defrost heater, main board and thermistor I still had the same problem. Called a repair guy and he (with the help of GE on the phone) diagnosed that the temperature sensor was bad. So I ordered from partselect and installed it and it fixed the problem. Been good for a couple months (knocking on wood). To install I had to cut the 2 wires to the old sensor, crimp the 2 new wires on and snap the new sensor to the clip on the evaporator. Very easy. Make sure you seal the ends of the wire crimps so moisture doesn't get in and corrode the connection.
Was this helpful?
Thank you for voting!
flap to ice dispenser would not close
420 of 487 people found this instruction helpful.
  • Bill from Cleveland Heights, OH
  • Easy
  • 15 - 30 mins
  • Screw drivers
The flap to the ice dispenser would not close, which allowed the ice dispenser to frost up, freezing the water dispenser.

This was a simple fix. The solenoid had stopped working, so it would not automatically close the door flap. I read some posts on this site that suggest that you had to remove the trim around the entire dis penser to get at the solenoid. My fridge may be a newer model, but in any event it was much easier than that. Just below the touch pad for choosing water, ice, or crushed ice (above where the ice/water dispenses) there are three very small holes spaced about an inch a part. After unplugging the fridge, I stuck a small philips-head screw driver in each, freeing spring clips. That allowed the touch pad to come off. I then removed four screws to remove a plastic piece covering the chute, giving me access to the flap and solenoid. I just unplugged the solenoid from the circuit board on the back of the touch pad and then removed three screws to remove the old solenoid. I replaced it with the new solenoid and plugged it into the circuit board. The touch pad then snapped back into place.

The hardest part was figuring out how to get at the solenoid. After I found that pushing the clips in those three holes allowed me to remove the touch pad, it could not be any easier.
Was this helpful?
Thank you for voting!