Part Videos
Replacing your Whirlpool Washer PUMP-WATER
Troubleshooting
This part fixes the following symptoms:
Will not drain
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Amana, Crosley, Maytag.
Part# WPW10661045 replaces these:
AP6023670, W10215134, W10614033, W10661045, WPW10661045VP
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
David C - April 14, 2023
Verified Purchase
easy install and fast shipping
came fast and got my washer back up and running in short order. thanks.
Rock D - November 18, 2022
Verified Purchase
Easy repaire!!
Grenat conditions
Gary T - September 3, 2022
Verified Purchase
Easier than expected
Replacing the pump went very smooth. Excellent timing from order to door, 36 hours..YouTube video great help
Trevor G - November 4, 2021
Verified Purchase
Great part bolted right up.
Quick shipping and right part no hassle.
Osmund C - October 19, 2021
Verified Purchase
Perfect
The pump was the exact replacement of the damaged replacement pump.
Darren B - July 21, 2021
Verified Purchase
Great part worked as expected
- part came in only a few days and worked perfectly to get our washing machine back in working order
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Easy to install
I just drained the washer and unscrewed the 3 screws unhooked the hose clamp and installed the new one attached the hose and hose clip. Really easy. Took longer to try up water in floor than installing.
Other Parts Used:
-
John from LEXINGTON, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not drain
Im a 58 year old single woman. Swap out of pump motor was so easy. Took less than 15 min. Ordered the part on Tuesday it came the next day. I installed it and did 4 loads of laundry.
Great company.
Great company.
Other Parts Used:
-
Kris from W MANSFIELD, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench (Adjustable)
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joseph
April 16, 2018
My Admiral washer fills up with water and I can hear it agitate, but when it gets to the spin cycle I hear no spinning and does not drain. Please help!
For model number ATW4675YQ1
Hi Joseph, Thank you for the question. I suggest testing the Lid Latch Assembly, PartSelect Number: PS3497627. If the switch is defective it will not allow the appliance to go into spin and drain. To test the switch, first and foremost disconnect your water and the power from your appliance before starting. Locate where your switch actually fits on to your appliance and place a magnet between them. Now there will be a magnetic connection between the lid switch and solenoid. After you do that, put the lid of the washer back on and turn on the appliance. If the appliance turns off, disconnect power once more and reposition the magnet. Caution. If you are at all uncomfortable with doing something like this, I would strongly suggest contacting a repair technician to come and help you. I hope this helps.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Joan
June 18, 2019
Washer will not drain
For model number ntw4516fw
Hello Joan, thank you for writing. For this symptom you will want to consider either the Water Pump, the Washer Drive Pulley, or the Agitator Repair Kit. The model number you provided is partial with multiple variations using some different parts. We will need the rest of the model number to look into the correct replacements. The missing information is a number at the end of what you provided.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Billy Harris
August 13, 2019
This washer work and goes throught cycles. However, when it get to spin it makes a alous scratching noise as if it having a hard time to spin and it does it again when the washer rinse, spin and drain as if same as above. 3 years old. I have a water pump well maybe sand is getting into the washer.
For model number MVWC415EW1
Hello Billy, thank you for contacting us. This could be due to either a faulty Washer Drive Pulley part number PS10057144 or Drive Belt part number PS11747978 for your model. I hope this helps and good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Cristian
March 13, 2020
Hello i have a Maytag washer machine model mvwc415ew0, but when i connected the drain pump make a different noise and the washer machine not start the normal cycle. I don't know what is the problem.
For model number WPW10661045
Good Day Cristian. Thank you for your question in regards to your unit (Model Number MVWC415EW0). Based on our research, you may need to replace one or more of the following parts in order to solve the issue that you are having: 1) Lid Latch Assembly (PartSelect Number PS3497627). 2) Lid Latch Strike (PartSelect Number PS11750882). You can order these parts either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
Was this helpful?
Thank you for voting!
Related Parts:
Betty
February 8, 2022
Need a pump and 2 shocks
For model number 41743042200
Hello Betty, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS2342445 for the Drain Pump and PartSelect Number PS3508101 for the Shock Absorber Kit. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
David
January 12, 2023
washer wont completely drain.can hear water under tub when rocking agitator
For model number WTW4800BQ1
Hello David, thank you for contacting us. The issue is most probably related to the drain pump, part number PS11757016. We would also recommend cleaning the drain filter and the drain hose to ensure that these are not clogged. We look forward to hearing from you if you need assistance with placing an order through our 7-day-a-week customer service. We hope this helps!
Was this helpful?
Thank you for voting!
Norma
May 8, 2019
Hi..my Amana washer won't rinse
For model number NTW4605EW0
Hi Norma, thank you for your question. There are a few parts that you should check when you are having this issue. The pump would be the first part to check. You should also check your switch and water inlet valve as well. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11757016
Manufacturer Part Number: WPW10661045
Manufacturer Part Number: WPW10661045
Brand
Model Number
Description