Part Location Diagram of WPW10405608 Whirlpool Washer Trap
See part 3 in the diagram
Replacing your Maytag Washer Washer Trap
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

1-866-883-8386 Monday to Saturday
8am - 8pm EST

customerservice@partselect.ca

Washer Trap WPW10405608

 Fits your MLG22PDAWW0!
$13.19
  In Stock
 Fits your MLG22PDAWW0!
PartSelect Number PS11754335
Manufacturer Part Number WPW10405608
Manufactured by Whirlpool
Part Videos

Replacing your Maytag Washer Washer Trap

Replacing your Maytag Washer Washer Trap
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Maytag, Whirlpool, Kenmore, Inglis.
Part# WPW10405608 replaces these:
8540140, 8540180, W10405608
Back to Top
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peter
December 29, 2023
What is the TRAP for?
For model number MHN33PDCWW0
PartSelect logo
Hi Peter, thank you for reaching out. Based on our research, the part that you mentioned attaches to the water level pressure hose and helps control the water level. We hope this information helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Chad
November 15, 2025
My machine sets code 9-2 The drain pump gets hot to the touch Replaced pump because the impeller was rubbing on the housing Code sets again after the third load. Once again pump hot and resistance test open circuit. Pump cools down and starts to work again It runs for 8 minutes at a time and I do not know the approx time it should run when emptying the tub. Pressure switch?
For model number WFW9150WW02
PartSelect logo
Hi Chad, thank you for your inquiry. Look for clogs or blockages in the sump area. Even with a new pump, a subtle blockage in the connecting hoses, the sump area, or the household plumbing the machine drains into can restrict water flow. This forces the pump motor to work harder, draw excessive current, and overheat. A faulty pressure switch or water level switch, part number PS12745510, or the tubing connected to it, might not be accurately detecting when the tub is empty. This could prevent the control board from cutting power to the pump at the appropriate time. Glad to be of help!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11754335
Manufacturer Part Number: WPW10405608
Brand
Model Number
Description
Kenmore
11041932510
Washer - COMMERCIAL WASHER
Kenmore
11041942710
Washer - WASHER
Kenmore
11041952710
Washer - Kenmore Washing Machine 11041952710
Kenmore
11046462500
Washer
Kenmore
11046462501
Washer
Kenmore
11046472500
Washer
Kenmore
11046472501
Washer
Kenmore
11047511700
Washer
Kenmore
11047511701
Washer
Kenmore
11047511702
Washer
Kenmore
11047512600
Washer
Kenmore
11047512601
Washer
Kenmore
11047512602
Washer
Kenmore
11047512603
Washer
Kenmore
11047512604
Washer
Kenmore
11047512605
Washer
Kenmore
11047531700
Washer
Kenmore
11047531701
Washer
Kenmore
11047531702
Washer
Kenmore
11047532600
Washer
Kenmore
11047532601
Washer
Kenmore
11047532602
Washer
Kenmore
11047532603
Washer
Kenmore
11047532604
Washer
Kenmore
11047532605
Washer
Kenmore
11047542600
Washer
Kenmore
11047542601
Washer
Kenmore
11047542602
Washer
Kenmore
11047542603
Washer
Kenmore
11047542604
Washer
Customer Service Representative

Get in touch, we're here to help!

1-866-883-8386 Monday to Saturday
8am - 8pm EST

Contact Customer Service