See part 11 in the diagram
( Grid squares measure 1x1 inch )
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
Motor Control Board Specifications
This part is usually located in the bottom of the washer next to the drive motor. It is used to control the drive motor speed as well as the direction for the spin and tumble actions during the cycle.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Maytag.
Part# WPW10374126 replaces these:
AP6020609, W10245123, W10374126
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
TED K - July 18, 2021
Verified Purchase
Correct Part. Fast delivery
In ordered the part on the Canada Day Holiday and it arrived two days later. It was the correct part. It was installed and the washing machine is now functional. Thanks.
Michael D - June 23, 2021
Verified Purchase
Worked as expected-easy to install
Up and running
Michel J - April 30, 2020
Verified Purchase
Exactly what I needed.
Easy to find, identify and order... Next day delivery during the pandemic!!! Could not ask for better service!
Stephen Z - September 8, 2023
Verified Purchase
Easy repair. The washer was back up and running in no time
I received the replacement unit and it was a simple install and the washer worked as good as new after that. Took about 30 minutes from start to finish.
Linda G - September 16, 2021
Verified Purchase
Easy repair, great part with no issues!
The part came quickly and the washer was up and running within a few days. Thanks a bunch!
Gord D - August 21, 2021
Verified Purchase
Plug and Play!
Ordered a motor control board. Expected to have to fit it into the old housing…it came in a new housing! Total time to install new board….less than 3 minutes! Clean clothes!
Pierre L - September 8, 2021
Verified Purchase
very simple, identical to the damaged one, unit now works fine
the motor control board arrived in just a couple of days after ordering it, it was identical to the original part. thanks for the help.
Jean-Guy D - March 24, 2022
Verified Purchase
To the point.
Same part and very easy to replace.
Barry S - October 20, 2021
Verified Purchase
Great part
Thanks again for your help. The part fits perfectly. I am satisfied with everything; including the speed at whither part was delivered to me.
James R - September 10, 2020
Verified Purchase
Right part, worked right, delivered within one day. Perfect.
Right part, worked right, delivered within one day. Perfect.
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
April 30, 2018
When replacing the motor control unit can it be accessed from the rear or is the easiest access via the front panel... my front panel is one whole piece not a two piece set up..
For model number WFW94HE
Hi Steve,
Thank you for your question. To access the motor control board, you will need to remove the back panel to gain access to it. It should be down on the bottom left corner. I hope this helps. Thank you and have a great day!
16 people found this helpful.
Was this helpful?
Thank you for voting!
Shane
July 11, 2019
The washer starts a selected cycle and shows remaking minutes but does nothing. A code F0 E0 appeared one time, but can not see this code again.
For model number WFW97HEXL2
Hello Shane, Thank you for the question. The F0 E0 normally indicates an issue with the boards communication. I suggest unplugging the appliance and opening up the control panel. Disconnect all the connectors and making sure there is no damage and then reconnecting them all securely. After the appliance it plugged back in and if the same issues occur, you may have a defective board. Hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Barkley
March 9, 2023
The machine acts normal until you hold start. The door locks and you can hear the relays o. The board clicking, nothing else happens. Eventually it will give the code F6e2. Then it takes a long time to unlock the door. I tried unplugging for several minutes and then restarting. Same result 3 times in a row. What does this code tell us?
For model number Wfw97hexL2
Hello Barkley, thank you for reaching out. The error code F6E2 indicates there is an issue with the appliance control unit, user interface, or associated wiring. We recommend replacing the control board, part number PS11753928, to fix the issue. We hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
July 5, 2024
I have error codes of E01 and F06. The washer is maybe 6 years old and does not get used daily? What can the problem be? It won’t start, but power is fine. When I hit the start button, no water comes in and it never comes on, just a click but the water doesn’t start.
For model number WFW94HEXW2
Hi James, thanks for asking us! The E01/F06 error codes indicate a communication error between the central control unit and the motor control unit. We recommend inspecting the wiring harnesses between these two boards and replacing any that show signs of wear or damage. If the harnesses are good, it is most likely that the motor control may need to be replaced. We hope this helps and good luck with your repair!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
$27.28
In Stock
Produce Preserver Filter
$27.28
PartSelect Number: PS3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f... 
$25.31
In Stock
Affresh Washing Machine Cleaner - 3 pack
$25.31
PartSelect Number: PS1960673
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe... 
$21.95
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$21.95
PartSelect Number: PS12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ... 
$37.89
In Stock
Refrigerator Deodorizer
$37.89
PartSelect Number: PS12739141
Refrigerator deodorizers help to reduce bacteria growth and therefore reduce smells and extend the life of food. 
$32.93
In Stock
Cooktop Cleaning Cream
$32.93
PartSelect Number: PS12717774
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d... 
$35.68
In Stock
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11753928
Manufacturer Part Number: WPW10374126
Manufacturer Part Number: WPW10374126
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST