If your oven isn’t heating right or the controls are acting up, this electronic control board could be the fix. It’s the part that keeps your oven running smoothly—managing temperature, heating elements, and the buttons or knobs you use to set it. When it starts to fail, you might see error codes or notice the oven isn’t cooking evenly. Swapping it out can bring your oven back to life. Just be sure to unplug the appliance before starting the repair!
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
Whirlpool.
Part# WPW10340304 replaces these:
AP6019900, W10340304
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
5.0
Filter By Rating:
5 Stars
7
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Irma F - June 3, 2021
Verified Purchase
Worked really good.
Had to wait for a few months for the part to get here
★★★★★
★★★★★
Richard S - March 24, 2023
Verified Purchase
part is great
parts work well, fix
★★★★★
★★★★★
Mike S - May 3, 2020
Verified Purchase
Fast delivery
Arrived within 24 hrs. Works perfectly
★★★★★
★★★★★
Barry T - January 28, 2022
Verified Purchase
The part was perfect the shipping was awesome the employee that help me was awesome he is a keeper very good customer service all around Thank You
It was a whirlpool stove motherboard it works great should last for another four years HaHa
★★★★★
★★★★★
PIERRE H - July 31, 2025
Verified Purchase
New control unit or new stove...
Temperature was no longer being regulated. Changed the sensor no effect. So made the choice 450 $ control module or new 2000 $ same model stove. Took the module and all is back to normal.
Also person on the order desk was a pleasure to deal with.
★★★★★
★★★★★
Denis F - June 4, 2021
Verified Purchase
great
the right part at the right price
★★★★★
★★★★★
RENE L - October 24, 2022
Verified Purchase
Easy to install
My oven is like new for a few $$$
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
10 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Karen
December 13, 2023
The oven is baking extremely hot. I will set it to bake at 350 and within minutes the food is burnt to a crisp (totally black)! Im assuming either a sensor or the whole control panel is not working. What do you suggest?
For model number WFE714HLAS1
Hello Karen, thank you for contacting us. According to our research, the issue is most probably with the temperature sensor, part number PS11749737. It detects the temperature within the oven cavity. You may need to replace the temperature sensor to fix the issue. We hope this helps!
Getting the error code. Broil k3 - replace control f6e1 runaway temp.What part specifically do I need to get and replace?
For model number WFE714HLAS0
Hi Zachary, Thank you for the question. The first thing to try is to disconnect the poser to the unit. Wait for about 5 mins then restore power to see if that resets the code. if this does not fix the issue, I suggest testing the Oven Sensor,PartSelect Number: PS11749737.Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If the sensor is good the Main Board, Part Number: PS11753211 will need to be replaced. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Chad
January 20, 2018
How easy is this to replace for a basic diy-er? Our oven will not bake and is stuck on broil. From all we are reading it says it is the control that needs to be replaced. The oven is only 4 years old so we are not sure if we should fix or replace.
Hello Chad,
Thanks for your question. This part is typically quite easy to install. Unplug your range, unscrew the back of the control panel, and disconnect the wire harnesses to access the board. The solution to your issue and the exact part needed may vary from model to model, keep in mind.
I hope this helps.
Was this helpful?
Thank you for voting!
Sandra
June 27, 2021
I set the bake temp to 325F and the broil came on during preheating and scorched my cake. What’s wrong?
For model number WFE710H0AS0
Hello Sandra, Thank you for the question. We suggest testing the Oven Sensor. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!
Control board does not send power to oven element all others work.
For model number YWFE710H0AW0
Hello Malcolm, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11753211. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Wade
January 3, 2023
Either the bake or broil element will come on. Is there a diagnostic test on the Control panel to see if that’s the issue?
For model number YWFE710H0BH1
Hello Wade, Thank you for the question. Unfortunately the board can not be tested. Sometimes there will be burn marks on the board where it may have shorted out. If both elements have continuity and the wiring is good, it is most likely a faulty Oven Control Board. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Ed
April 21, 2024
My Ovens Broke!!!
The oven will only heat to 210F set at 350F and if you turn the Broiler on and set the temperature to 475F it will heat to set temperature and maintian set temp. But on Bake it won't hold the set temp. I don't think it's the temperature probe. Once when my wife was making muffins it went wide open and burnt them. We called a local Service man to Check it out. Couldn't Find any issues with it. But we had a potatoe explode in the oven and the Temperature probe got bent during cleaning and was shorting against the frame of the oven. When I noticed it, I streightened it out and worked fine, could this be causing a problem now??
For model number ywfe710h0bh1
Hello Ed, thank you for reaching out. We have concluded that the issue is with the bake element, part number PS11703285. You may need to check it to solve the problem. Glad to be of assistance!
My oven will not preheat past 285 degree Celsius, however seems to preheat just fine when on the convection setting. Broil seems to work as well. Could this just be a bake element?
For model number YWFE710H0AW0
Hello Fallan, Thank you for your inquiry. Researching your model, we would recommend checking the temperature sensor and safety thermostat first, which you can do with a multimeter. Good luck with your repair.
the duel burners get stuck on high. Sometimes right away. Sometimes after they have been on for a while.
For model number WFE710H0AH0
Hi Kimberly, thank you for contacting us. Based on our understanding, the issue could be with the dual element control switch, part number PS11754687. You may need to replace it to fix the issue. We hope this sorts out your problem!
My Whirlpool electric stove is completely dead. I flipped the breaker for over 5 minutes. No change.
Likely the control panel? Or...?
It is 13 years old, had light use and one small element only works at low Temps. Please advise.
Thanks!_
For model number WFE710H0AS0
Hi Marybeth, thank you for your inquiry. According to the description of the issue, you will need to replace the control board, part number PS11753211, to fix the issue. Glad to be of help!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/Range-Circuit-Boards-and-Touch-Pads.htm"},{"position":2,"name":"WPW10340304","title":"WPW10340304","url":""}]
