This water inlet valve controls water flow into the washer. Verify compatibility before ordering. Always unplug the washer and shut off the water before installation.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking | Water Filling Issues
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Maytag.
Part# WPW10247306 replaces these:
AP6017716, W10239900, W10247306, W10513404
Customer Reviews
Average Rating:
★★★★★
★★★★★
6 Reviews
4.8
Filter By Rating:
5 Stars
5
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jared S - March 6, 2023
Verified Purchase
Perfect
Easier repair than I thought.
★★★★★
★★★★★
Arshad A - December 11, 2020
Verified Purchase
Fits perfectly
Was able to get the perfect match. Price could be better, but it does it's job. No complaints
★★★★★
★★★★★
Rob P - September 11, 2025
Verified Purchase
Easy repair
The part was exactly as described, was on my doorstep within 24hr. Machine is working like new again.
★★★★★
★★★★★
Dadi N - March 31, 2020
Verified Purchase
Identical replacement
I received the replacement part & verified it to be identical.Replacement seems quite simple I am keeping it as a spare until I reface it as soon as my one gives up. Thanks.
★★★★★
★★★★★
Miguel B - February 12, 2020
Verified Purchase
Valve works great!
The valve was the right part and arrived quickly! Saved a couple of hundred bucks replacing it myself...easy peazzy!
★★★★★
★★★★★
Fred R - March 4, 2019
Verified Purchase
easy repair
The part had a minor piece broken off but this has not affected the performance. It was just a clip cover which broke in shipping(perhaps a bit larger box and some bubble wrap would be in order for the future) . I now have a great running Maytag washer. Thank you for the speedy delivery.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer kept filling up with water after the load was completed because the valve was leaking
Checked YouTube and the guy walked me through the process and it was exactly as he described
Other Parts Used:
Robert from Greenacres, FL
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Juvenal
December 17, 2021
MY WASHER SHOWS ERROR CODE E01 F09 MID CYCLE - COLD WATER IN TO THE WASHER IS VERY SLOW. WILL THIS PART FIX THE PROBLEM
For model number MHW7000XGO
Hi Juvenal,
Thank you for your question. The E01 F09 error code means that the drain time has lasted longer than 8 minutes and there may be an issue with either the drain pump, the pressure sensor or the electronic control board. If you are using the wrong detergent in your washer this can lead to a long drain time and the code will appear. Make sure also that the drain hose is not bent and that it is positioned correctly. Check and clean the drain pump filter if there is any debris in it and make sure the connections to the pressure hose and the pressure sensor are fitted correctly. We hope this helps! If you have any questions, please let us know.
Machine allows water to slowly pool in drum after machine is off. Spins out fine but water pooling appears in drum days later.
For model number Wfw9750ww01
Hello Susan, thank you for your question. Your washer may have a clogged drain hose or the pump may be broken. If the pump is broken, you'll probably hear sounds when the machine is running. Your washer has a filtering device down and near the pump called a drain filter, check this filter for debris. You can test the drain pump with a multimeter. Unplug the appliance from the electrical outlet before you begin. Touch a probe to each of the terminals on the pump. A reading of zero or infinity, means the pump requires replacement. Part number: PS1485610. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
softener is not adding to loads tray gets little to no water flushing it into cycle will replacing this valve resolve this problem
For model number WFW92HEFBD
Hi Ken, thank you for the question. According to our research, the problem appears to be with the Dispenser Actuator, part number PS11753574. The Dispenser Actuator attaches to the top of the dispenser and helps direct water to the detergent, bleach, or fabric softener cups. If that does not help, then we would recommend checking the Water Inlet Valve, part number PS11750866. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
Like Susan’s problem; after the washing machine has completed cleaning there is no extra water in my drum. I can remove clothes and put them in my dryer. However. There remains a slow water leak coming from the top left of the machine internally. It’s like the water shut off is not completely off. After 12 hrs. there is a pool of about a gallon of water. What part do I need to replace to fix this? I already checked the drain and pump and they are working fine.
For model number WFW95HEXL2
Hello Paul, thank you for your inquiry. We would recommend checking the water inlet valve, part number PS11751015, to fix the issue. It controls the water flow into the washer. We hope this solves your problem!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
