This surface burner knob is a little under two inches in diameter. It is a black knob with gray numbering indicating the temperature level of the surface burner: low, medium, high, off, and lite. Made entirely of platic, this knob will accept a 'D' shaped shaft.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Joe D - October 29, 2020
Verified Purchase
exact fit
fast delivery
★★★★★
★★★★★
Ligia C - June 17, 2021
Verified Purchase
Knob
Perfect fit, no hassles, fast service. I was impressed.
★★★★★
★★★★★
Michelle I - September 15, 2021
Verified Purchase
Good service!
Very quick delivery
★★★★★
★★★★★
Ligia C - August 4, 2021
Verified Purchase
Great replacements
Well after replacing one burner knob the decision was made to make the range look just right so we went ahead and ordered more. Looks great not disappointed at all.Thanks
★★★★★
★★★★★
Brian B - November 7, 2021
Verified Purchase
Quick and Easy
The part came quickly and it was very easy to install.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 15 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
one of the surface burner knobs melted and then cracked
the hardest part of the whole thing was finding the part... partselect.com made it easy. the part was delivery quickly using regular mail, and I was simply able to slide the new knob on.
Other Parts Used:
Ronald from Philadelphia, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
474 of 479 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
3 out 4 surface burner knobs were broken
Simply pulledoff and threw away the old bad knobs and slipped the new ones on in thier place- four working burners now!
Most amazing thing was I ordered the parts one afternoon and they arrived the very next day.
Also, your site was easy to navigate and find what I was looking for. Many thanks!
Other Parts Used:
Aaron from Elkton, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
174 of 322 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
stem on the dial split, couldn't turn the burner on
threw out the old and slipped on the new dial....
Other Parts Used:
Kathy from Bell, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
150 of 289 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One grate was broken the other was corroded, and the knobs were melted
Went broke purchasing the very simple part through you PartSelect Appliance Parts
Other Parts Used:
Warren from Alexandria, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
148 of 287 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old knobs broken and couldn't turn on burner
Replacement parts fit as suggested by model number (newer parts are a little different but fit fine). Grates look a bit more modern but hopefully will work fine too. Amazingly fast shipping!
Removed old knobs and grease filter and replaced with new ones. Excellent service, parts arrived the day after I ordered them. Everything fit perfectly and was just as described on the website. I would certainly use PartSelect again for replacement parts on any listed appliance.
pulled it off, went to internet to see if I could find. Did Find. Ordered and replaced.
Other Parts Used:
Peggy from Ellwood City, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
68 of 132 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
valve for turning on gas is immovable
1. Turn off power to the cooktop and turn off the gas. This is extremely critical. 2. Remove the knobs and then the covering. Beneath will be the valve part you need to change. 3. Find a way to mark where all the wires go into the piece that sits over the valve (mine was white with a blue ring in the center). You will see four wires going into it. You can photograph it, or you can use tape and a sharpie to write where everything goes on the parts themselves. It is likely that they will become disengaged at some point during your repair, so the step is crucial. 4. Lift off the piece on top of the valve (the valve goes through the blue hole in the center of the white piece). Don't be afraid to give it a tug, as it can be slightly stuck. 5. Find a way to get underneath the large circular plate (mine was gold colored) beneath the valve in order to remove any screws that are holding the valve in place unseen below the surface. 5. Now back above the surface: disconnect the gas valve attached to the valve. 6. Switch out the valve to the new one and reverse these steps to install it. ****7. If you are unable to get beneath the plate where the valve is attached on the underside, no worries. Take the new valve and carefully unscrew the top two screws (need a special tool from a hardware store) and similarly take off the screws on top of the broken valve. Be very careful to remove the top of the old valve slowly enough to see exactly how the inside pieces have to be put together. Essentially, you will find a spring and a small ring with three notches. The small part of the spring goes on the bottom, the larger part of the spring faces upward, and on top of that goes the ring with the three notches aligned in a certain way that's very important so that when you put it back together not only will the valve depress properly but you will be able to change the fire from low to medium to high. Make sure you can depress the valve a little bit, if not you have to readjust the ring until it's in the proper position. 8. Turn on gas and power to be sure it works. 9. Close unit. ***Note: if any of your parts accidentally dropinto the opening, use a magnetized srcrewdriver to retrieve them.
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stewart
November 27, 2019
Our stovetop is 30 years old and the new knob's stems are not long enough to engage mechanism to allow burners to turn on. Any suggestions? If necessary could we replace that section of the stove top only?
For model number cg106
Hello Stewart, thank you for your question. Unfortunately, these are the only replacement knobs available for other options we would recommend contacting the manufacturer directly. I hope this helps.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Judy
March 2, 2020
I need the burner knobs in grey for a white unit. I only see black ones on your website. Are the grey knobs available?
For model number CVG4280
Hello, Thank you for your question. The grey knobs for your model are Surface Burner Knob- PartSelect Number PS11743852. We hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Paula
September 20, 2021
How many knobs come in the order for 14 dollars
For model number Jennaire down draft cooktop
Hello Paula, thank you for your question. This knob is sold individually. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Fran
May 5, 2023
The knob will not turn .it’s the front burner knob.
Also I’m thinking of replacing the grill with 2 more burners how much would that cost
For model number CG200
Hello Fran, thank you for your question. The Knob is PS11743851. The Grill Burner is PS1988290. The Grill Grate is PS2002886 but discontinued with no replacement. All parts are sold individually. For the most up to date pricing and availability, please visit the website or call in to speak with customer service. We hope this helps.
What size is the shaft on the surface control knob?
Hi Joyce, Thank you for your question. Unfortunately the manufacturer does not give us exact specifications on their parts. However this part is photographed on a one inch grid background, so that customers can get an approximate size for the part. It looks like the shaft is about 1/2 of an inch wide. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Pedro
July 9, 2019
How many on the package
For model number Cg206b
Hello Pedro, Thank you for the question. These knobs are sold individually. Hope this helps!
Was this helpful?
Thank you for voting!
Vickie
July 25, 2019
Got new knobs the shaft is too short can't turn on burners what can I do?
For model number CG206S
Hello Vickie, Thank you for the question. I suggest contacting customer service at 1-888-738-4935 so we can check the order to make sure the correct knobs were ordered and shipped. Hope this helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
