This surface burner knob is a little under two inches in diameter. It is a black knob with gray numbering indicating the temperature level of the surface burner: low, medium, high, off, and lite. Made entirely of platic, this knob will accept a 'D' shaped shaft.
This grease filter is almost fourteen inches long and almost twelve inches wide. This filter is intended for use with some downdraft cooktops and ranges.
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
This nine-inch black burner fits right onto the front of your gas range and helps deliver even heat while you cook. It’s built to last and designed to work smoothly with your appliance. If your current burner is worn out or not heating properly, this replacement can help restore performance. Just make sure it matches your model before installing.
This glossy black burner sits at the back of your stove and helps deliver steady heat while you cook. It guides the gas to the burner head so your meals cook evenly. If your rear burner isn’t lighting or heating properly, this part could be the fix. It’s a direct replacement and easy to install—just make sure the stove is off and disconnected before starting.
This blower wheel attaches to the ventilation motor to draw in and exhaust smoke, steam, and cooking vapors, helping maintain clean airflow in your kitchen. Built from durable metal for heat resistance and long-lasting performance, it measures approximately 7 inches in diameter and under 4 inches deep for a secure, efficient fit. Designed...Read more to spin smoothly on the motor shaft, replacing a worn or damaged blower wheel can restore proper airflow, reduce noise, and ensure reliable ventilation performance.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kevin - For model number CVG4380B
December 27, 2023
We have never been satisfied with the heat of the burners I have another gas stove that puts out three times the flame. Do I need different orifaces or the regulator some how.
Hello Kevin, thank you for your inquiry. Based on the description that you have provided, we would recommend cleaning the orifices. If this does not resolve the issue, then you may need to replace the regulator, part number PS12074765, to fix the issue. Glad to be of help!
Hello Hubbard, thank you for your question. That humming noise is your regulator valve that your gas line from your house connects to on the back of the oven. Check that the gas pressure isn't too high coming from your house. If it's not, then you need to replace your Regulator Valve PS12074765. One of the most common reasons a gas stove starts clicking is because the burner cap is out of alignment. We hope this helps.
Hello, I need to replace both front and rear burners but don’t see the front burner offered.
Please advise.
Thank you.
Hi Madeline, thank you for your inquiry. The rear burner, part number PS1647215, and the front burner assembly, part number PS11744567, are compatible with your model number. Glad to be of help!
Hello Juanita, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS1988290. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
replaced filter
486 of 513 peoplefound this instruction helpful.
ELOISE from MILFORD, OH
Really Easy
Less than 15 mins
pulled old one out , cleaned the area & replaced with the new one.
Was this helpful?
Thank you for voting!
one of the surface burner knobs melted and then cracked
474 of 479 peoplefound this instruction helpful.
Ronald from Philadelphia, PA
Really Easy
Less than 15 mins
the hardest part of the whole thing was finding the part... partselect.com made it easy. the part was delivery quickly using regular mail, and I was simply able to slide the new knob on.
Was this helpful?
Thank you for voting!
Old grease filter that I actually did not know I had to change
451 of 540 peoplefound this instruction helpful.
deborah from fort pierce, FL
Really Easy
Less than 15 mins
Removed the old grease screen and cleaned the entire area thoroughly and replaced the screen