Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
Drain Pump w/Bracket Specifications
If your washer isn’t draining properly or you’re hearing strange noises, this drain pump might be the fix. It’s a genuine part made for Whirlpool, Maytag, and KitchenAid washers, and it helps remove water from the tub after each cycle. The pump uses a spinning impeller to push water out through the drain hose. This replacement usually comes with a bracket and instructions—just make sure it fits your model before installing.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will not drain
This part works with the following products:
Washer.
This part works with the following products:
Maytag.
Part# WP34001320 replaces these:
AP6008427, 34001320, DC96-00774A, WP34001320VP
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Carlin M - January 10, 2023
Verified Purchase
Saved me from having to buy a new washing machine
With 4 kids, needed the part fast to fix my 2006 Maytag Neptune, or needed to cough up $$$ for a new machine... Order was easy. Delivery was fast. Part works perfectly... Will hopefully get another few years out of the old girl yet.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
A small coin had entered the impeller and the blades ground off against it.
The rear access is attached with 2 Phillips head screws, which I removed.
The drain hose is held up with a similar screw.
I removed the screw and drained the hose into a bucket.
Then I just removed the connector and hoses with my fingers, removed the three 1/2" bolts holding the pump in place, changed the pump and put everything back together. Works like a champ. Quick and easy fix.
My only negative comment is that I only needed the impeller, but had to buy the complete pump assembly. Other than that, all fine.
The drain hose is held up with a similar screw.
I removed the screw and drained the hose into a bucket.
Then I just removed the connector and hoses with my fingers, removed the three 1/2" bolts holding the pump in place, changed the pump and put everything back together. Works like a champ. Quick and easy fix.
My only negative comment is that I only needed the impeller, but had to buy the complete pump assembly. Other than that, all fine.
Other Parts Used:
-
CHARLES from MAGNOLIA, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench set
46 of 56 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741564
Manufacturer Part Number: WP34001320
Manufacturer Part Number: WP34001320
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST