Part Location Diagram of 4400EL2001F LG Dryer Drum Belt
See part K130 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Dryer Drum Belt

★★★★★
★★★★★
3 Reviews
$81.30
  In Stock
PartSelect Number PS11705916
Manufacturer Part Number 4400EL2001F
Manufactured by LG
Product Description

Dryer Drum Belt Specifications

This belt helps rotate from the drive motor to the drum.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Noisy | Drum Not Spinning
This part works with the following products:
Dryer, Washer Dryer Combo, Washer.
This part works with the following products:
LG, Kenmore, General Electric.
Part# 4400EL2001F replaces these:
AP5972814, 4400EL2001A, 4400EL2001B, 4400EL2001C, 4400EL2001E
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
5.0
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.0 / 5.0, 12 reviews. What's this?
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Dryer would turn on but no heat to dry clothing
Unplugged dryer, pled forward to get access to back of dryer. Removed screws, enabling top, front control clip. door panel to be taken off. Lift out drum, replace heater assembly. drum belt, thermistor. Cleaned entire interior and reassembled, working good as new. All parts fit and were a exact match.
Other Parts Used:
Dryer Thermistor Heater Assembly
  • Spencer from SHALIMAR, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
16 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy when drying. A bumping noise
Watched the video a couple of times. After that it was a breeze.
Other Parts Used:
4 PACK ROLLER ASSEMBLY
  • Arthur from SOUTHLAKE, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set, Wrench set
12 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud thumping when dryer was turned on
Completly disassembled dryer removed 2 rear rollers installed 2 new rollers. Reassemble dryer in including new drum belt. Dryer is nice and quiet again running fantastic, thank you for your support
Other Parts Used:
4 PACK ROLLER ASSEMBLY
  • Barry from ROSELLE PARK, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench (Adjustable), Wrench set
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Frozen up roller on rear of dryer
Removed top of dryer
I carefully removed wires from back of control panel
Removed control panel
Most of screws hold cabinet together
Unhook wire from light on door and sensor on the front panel.
Remove the front door and panel together
I changed both front rollers on front panel
If you have to change rear rollers lift tub up by belt
Remove screws on back of dryer that will let you lift out inside rear panel that holds the rear rollers
Change rollers and just revearse procedure to put back together
Other Parts Used:
4 PACK ROLLER ASSEMBLY
  • Joseph from PIQUA, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
1 of 4 Drum Rollers Froze Preventing drum rotation.
Replaced idle pulley wheel, worn drum belt and all 4 rollers (1 frozen) due to dryer age. Site video re general disassembly/re-assembly easily adapted to this model and very helpful with exception of replacement of drum rollers. New rollers received (AGM75510755) were pre-mounted on included shafts. This required removal of existing roller shafts to replace with new shaft/roller units. Site video shows placing a new roller on existing shafts after removing a plastic retaining clip. New roller/shaft assembly is a better option and fortunately I did not order extra retainer clips! Rear drum roller shafts have small carved out space to fit a box end wrench to remove shaft nut. Watch out for sharp edges on internal steel parts!
Other Parts Used:
4 PACK ROLLER ASSEMBLY Pulley,Idle
  • Mark from OSHKOSH, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench set
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drum wasn't turning
I took the dryer apart. You have to take the top off, then the door/front off. There are wires & other parts that need to be unhooked as well. A flat tip screw driver can be used to pop the top off. The screws were all phillips. Once you take that all apart, then you can access the drum. I bought the belt because I thought that was what was wrong with it. Turned out to be hair in the drum rollers. Took those all off & put wheel grease on each of them, put new belt on (since I had it LOL) then put it all back together. Make sure everything is lined up correctly otherwise you will have to take it apart & reline (which I had to do)
I am a 49yr old female & was able to do this repair on my own!
Other Parts Used:
  • Beth from FROST, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
making squeaking noise
Watched a You Tube video
Other Parts Used:
  • Paul from MONTGOMERY, AL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench set
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud squealing during operation
We replaced the drum belt and the rollers. Everything was very easy and straightforward but took a fair bit of time due to the extensive disassembly required. We followed the video available on the website for the belt replacement, which was very clear and accurate. Unfortunately, the rollers we received used a different attachment method than the OEM rollers which are depicted in the video provided. Instead of attaching from the front with a triangular plastic lock washer, they had to be attached via a nut on the back side of the roller. This required some improvisation and was a little more involved. For the rear rollers, we actually had to remove another panel to access the nuts, which was not described in the video. Nevertheless, we managed to get everything replaced and the dryer is working like it was the day we bought it.
Other Parts Used:
4 PACK ROLLER ASSEMBLY
  • Nathaniel from BRIDGEWATER, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Shrieking noise when the dryer tried to turn
I assumed this was a belt problem. Ordered the belt and followed the excellent screw by screw instructional YouTube provided by PartSelect. In fact, I probably would not have attempted the repair, until I watched the video and was reassured that I could do it. When I got the front panel off, the problem was obvious. There was a dishrag stuck in the blower. Didn't need the belt, but the video was sure worth the price of the part (~$17). Mr. Appliance charges $109 to DIAGNOSE the problem! This was way easier than dealing with them, especially during a pandemic near the holidays.
Other Parts Used:
  • William from JOHNSON CITY, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drum bearing had gone bad causing excessive noise
Followed the repair video provided in the order confirmation email. Was easy.
Other Parts Used:
4 PACK ROLLER ASSEMBLY
  • Dennis from Manchester, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

16 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Claudia
September 27, 2017
How can we change the belt
For model number DLE5977S
PartSelect logo
Hi Claudia, Thank you for your question. Here is a link to a video that we have set up on how to do this: https://youtu.be/YZdUgbQ4rpE . Good luck with your repair.

14 people found this helpful.

Was this helpful?
Thank you for voting!
Susan
October 17, 2019
Is there just one belt to replace, or multiple belts in my dryer? Does the partselect order include just one belt?
For model number dle7177rm
PartSelect logo
Hi Susan, this part PS11705916 is just one belt, I can only find one belt for your model. Thank you for your question and good luck with your repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Clarence
February 13, 2019
Dryer won't turn on. Light inside drum is on. Replaced door switch
For model number dlg2051w
PartSelect logo
Hi Clarence, Thank you for your question. If the dryer will not start and you have already replaced the door switch, there are some other parts that you will need to check to see which ones are causing the issue. You will need to check the drive motor, the electronic control board and the belt. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Jack
March 21, 2019
Is this the correct belt for my Kenmore 796.80272900 dryer?
For model number Kenmore 796.80272900
PartSelect logo
Hello Jack, thank you for your question. Yes, the belt PartSelect Number: PS11705916 is the correct replacement part for your specific appliance. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Brandon
April 30, 2019
According to your diagram i need part f110 what is that exactly ?
For model number DLEX7600WE
PartSelect logo
Hello Brandon, Thank you for the question. F110 on your model is a Heater Assembly, PartSelect Number PS3527790. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Emmanual
January 3, 2020
What is the belt length?
For model number DLE8377NM
PartSelect logo
Hello Emmanual, Thank you for your question. The belt is 92 1/4" in length. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Ruthie
March 7, 2022
What is the length of this belt?
For model number DLG5988W
PartSelect logo
Hello Ruthie, Thank you for your inquiry. We show this belt as approximately 92 1/4 inches long by 1/2 inch wide. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Paul
June 6, 2023
Hi: I need to buy a belt for my dryer: LG model DLGX8101W. At your website, I see this belt for sale: 4400EL2001F, PS11705916. Will this belt fit my dryer? I am concerned because the belt in my dryer seems to be a little longer than other belts. Also, the belt in my dryer has four grooves on the inside. Most other belts seem to have only three grooves. Thank you.
For model number DLGX8101W
PartSelect logo
Hi Paul, thank you for contacting us. The belt you mentioned is not compatible with your model. The compatible part is part number PS7785075. We hope this solves your problem!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Michelle
January 30, 2020
How long is this belt
For model number dlex5170w
PartSelect logo
Hello Michelle, Thank you for your question. The belt is 92 1/4" in length. We hope this helps!

Was this helpful?
Thank you for voting!
TONY
October 14, 2017
Part # for drum belt for Maytag dryer 95 1/8 long.
For model number MEDB200VQ0
PartSelect logo
Hello Tony, thank you for contacting us. The correct part number for the drum belt that fits your model is PS11748884. Hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11705916
Manufacturer Part Number: 4400EL2001F
Brand
Model Number
Description
LG
048231014465
Dryer - Dryer
LG
35044262
Washer Dryer Combo - Washer-Dryer
LG
48231010009
Dryer
LG
48231010030
Dryer
LG
57521
Washer Dryer Combo - Washer-Dryer
LG
61412
Dryer - Dryer
LG
61422
Dryer - Dryer
LG
61423
Dryer - Dryer
LG
61452
Washer Dryer Combo - Washer-Dryer
LG
61462
Dryer - Dryer
LG
61463
Dryer - Dryer
LG
61513
Washer Dryer Combo - Washer-Dryer
LG
61522
Dryer - Dryer
LG
61523
Dryer - Dryer
LG
61552
Dryer - LG Dryer Model 61552 Parts
LG
61553
Dryer - Dryer
LG
61622
Dryer - Dryer
LG
61623
Dryer - Dryer
LG
69002
Dryer
LG
69478
Dryer - Dryer
LG
706574
Washer Dryer Combo - Washer-Dryer
LG
71433
Washer Dryer Combo - Washer-Dryer
LG
71462
Dryer - LG Dryer Model 71462 Parts
LG
71463
Dryer - Dryer
LG
71522
Dryer - Dryer
LG
71523
Dryer - Dryer
LG
71552
Dryer - Dryer
LG
71553
Dryer - Dryer
LG
71623
Dryer - Dryer
LG
75142
Dryer - LG Dryer Model 75142 Parts
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service