The drum support roller for your dryer holds the drum in place while the drum turns on the support wheels. The drum roller is round with a bearing in the middle and measures approximately 3 inches in ...
$182.93
In Stock
Order within the next 4 hrs and your part ships today!
The moisture sensor, also known as a humidity sensor, works in conjunction with your dryer by helping determine the amount of moisture in the drum to reduce overdrying. If the timer doesn’t advance co...
$28.25
In Stock
Order within the next 4 hrs and your part ships today!
The drive belt is made to wrap around the drum, working with the tension pulley to rotate the drum. If your dryer drum will not turn, then you may need to replace your belt. This drive belt is 1/4-inc...
$83.58
In Stock
Order within the next 4 hrs and your part ships today!
The lint filter sits in your dryer, and collects loose lint when the machine is operating. Sometimes the lint filter will become clogged or damaged, and in this case, you will need to replace your cur...
$79.43
In Stock
Order within the next 4 hrs and your part ships today!
Looking to extend the lifespan of your LG electric dryer? Our authentic LG Idle Pulley could be the missing piece you need! This little thing plays a big role in keeping your dryer working smoothly an...
$42.99
In Stock
Order within the next 4 hrs and your part ships today!
Take a look at this essential LG Dryer Safety Switch Assembly. A don't-miss fixture for your LG Dryer. This is more than just a part, it's a safeguard for you. If your dryer's door springs open, this ...
$56.87
In Stock
Order within the next 4 hrs and your part ships today!
This light bulb provides interior illumination, making it easier to see contents or monitor operation. Designed to withstand heat and vibration, it restores visibility when the original bulb burns out or dims over time.
$27.93
In Stock
Order within the next 4 hrs and your part ships today!
Questions And Answers for 79661512210
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Connoe
April 23, 2023
My dryer squeaks in the back with each revolution
For model number 79661512210
Hi Connoe, thank you for contacting us. We have concluded that the issue is with the roller assembly, part number PS16763594, which might not be lubricated or worn out. We hope this sorts out your problem!
Hi Gayle, thank you for writing in. If you are looking for the Dryer Lint Screen, it is part number PS3527575, or the Dryer Vent Cap is part number PS3525708. We hope this helps.
dryer functions ok when competed the only way to shut down th drum is open door.
For model number 79661512210
Hello David, Thank you for your inquiry. We have researched the model number that you have provided and this is usually caused by a faulty door switch, an issue with the door latch or an issue with the control board. We hope this solves your problem!
My kenmore dryer won’t quit running after drying cycle ends the panel power goes out! If I open the door or pull the plug is the only way it will stop tumbling
For model number 79661512210
Hello Derek, thank you for your question. We have researched your model and found that the issue is probably with the PCB Assembly Display, part number PS7792551. If that does not take care of the issue, then the problem is most likely to be related to the PCB Assembly Main, part number PS3625018. If you require assistance to place an order, please contact customer service. We hope that helps!
My dryer gets hot but sometimes I need to run it twice to get my clothes completely dry. What would that be?
For model number 79661512210
Hi Gary, thank you for reaching out. The issue could be with the moisture sensor, part number PS3529161. It controls the temperature in your dryer and will turn off once your clothes have reached the desired dryness level. You may need to replace it to fix the issue. We hope this sorts out your problem!
Had to replace front drum support rollers. Removed screws underneath top in back that held bracket that keeps top in place. Slid top towards rear and lifted up. Removed 4 screws that hold plastic front panel in place (inside..2 on each corner) Unplugged front panel electric plugs to remove panel. Opened door..removed 2 screws at bottom of door opening. Removed screws on top of front panel. Unplugged door switch plug. Removed front panel. Removed right front roller with 9/16th wrench for nut. Adjustable for back of stud. Lifted up on drum to get roller out. Reversed to install. Left roller a bit harder to get to stud. Removed and installed same as right side. Did not attempt to replace rear rollers. Have them if needed but very much more involved to replace.
I actually went to mr fix it on u tube. Great instruction on how to take dryer apart. First I unplugged the dryer. I found I could reach the heating system by removing the lint tube in the back of the dryer. I put my I phone with the light on inside the back of the dryer and tested the connections to see if all were working. The thermal fuse was not working. I removed the two wires , red on top and white on the bottom. Then used a small Phillips screwdriver to remove the two mounting screws and removed the fuse. I then used a vacuum to clear any lint from the back of the dryer and inside the dryer. This took me about an hour and a half. I did it this way because I did not want to disassemble the entire dryer to get to the components. I received the fuse in 3 days and tested it. It was fine. I then put it in the dryer screwed it in place, connected the wires. Replaced the lint tube. This took about 10 minutes. Dryer is running great.
Found disassembly video and watched several times. Suspected that one of the drum wheels had seized up. Found extreme volume of lint and hair inside unit as well as a dryer sheet melted on top of heating unit. Front left drum wheel was worn down from lint and hair jamming its movement. Video made it easy, not a really complicated piece of machinery. Replaced all 4 wheels due to normal wear on other three. Wanted to be sure drum evenly balanced on all 4. Parts came quickly and were easy to install. My sister and I did this together. Would not recommend doing it alone. Took time to vac and wipe down entire unit. Now it runs so quiet we have to look to see if it is operating. Got a brand new machine out of it, saved a couple of hundred dollars in repair bills, and found 11 cents inside the machine. For your own piece of mind, if you have had your dryer for several years, you need to open it up and clean it out. Its not hard... added note, we are both in our 60's... so if we can do it so can you.... Such a feeling of accomplishment, can't buy that in a store....
