They are all strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used to dry the clothes in your dryer
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ricky
September 16, 2021
Does the heating element come with both thermostat like on the picture?
For model number Dlex3360v
Hello Ricky, Thank you for the question. This Heater Assembly comes with the High Limit Thermostat and Thermal Fuse as seen in the picture. We hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Jessica
December 30, 2022
Will your part fit this model. I didn't see it on the list. Thank you very much!
For model number DLEX5170W
Hello Jessica, thank you for writing. Yes, the Heater PS3527790 you had chosen is compatible with your model. Please feel free to give us a call. We look forward to hearing from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Troy
March 31, 2023
Is the heating element an LG part or a knock off?
For model number DLE2240W
Hi Troy,
Thank you for your question. This is a brand new LG OEM heater assembly. If you would like to place an order for the heater assembly, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Shakia
April 4, 2023
How can I disassemble my dryer to replace the heater assembly?
For model number 79681182310
Hi Shakia, thank you for reaching out. Here are some general instructions that may help you replace the dryer: First, unplug the dryer for safety. Remove the back panel by removing the screws. Slide the top panel backward and remove it by lifting it. Remove the wire harness and screws from the control board and place them on one side. Open the front door; remove the screws holding the lint screen to the front panel. Close the door and remove the screw on the front panel. Bend the locking tab on the front panel with the help of a plier. Remove the wire attached to the front panel, pull the panel upward to free it from brackets, and put the panel aside. Unplug the wire from the light socket. Remove the side bracket and any wire attached to it. Unplug the moisture sensor, located at the lower right hand. Remove the screw from the Buckhead, and to remove it, lift it. Reach inside the unit, move the idler pulley to the left, and remove the belt. Use the belt to hold up the tub and take it out. Now that you have access to the heater assembly, all you need to do is remove the wires using the screwdriver. Remove the screws from the heater assembly, take it out, and install the new one. We hope this information helps!
Was this helpful?
Thank you for voting!
Joey
April 22, 2022
Part 5301EL1001H, on the thermostat are there two ears to connect the white wires
For model number DLEX2501W
Hello Joey, Thank you for your inquiry. The high limit thermostat that goes on the heater, part# PS3530482, actually has 3 terminals on it. The thermal fuse, part# PS3530485, has two prongs. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer would turn on but no heat to dry clothing
Unplugged dryer, pled forward to get access to back of dryer. Removed screws, enabling top, front control clip. door panel to be taken off. Lift out drum, replace heater assembly. drum belt, thermistor. Cleaned entire interior and reassembled, working good as new. All parts fit and were a exact match.
This dryer thermistor temperature sensor helps monitor and regulate the temperature inside a dryer. This part includes the wire harness. If your dryer overheats, does not produce enough heat, or takes too long to dry, th...
