TS518SW Amana Refrigerator - Instructions

Removed the door-the hardest part, placed door on saw horses and removed what seemed to be several hundrded screws. In reality there were about 20 screws!! Replaced the gasket and door and kept it tightly closed with duct tape overnight..It's workin' great. Thanks to a guy named Appguy everything came out fine.

I removed the old handle and replaced it with the new one. Three screws and I was done.

The repair was very simple and the refrigerator now looks almost new. We are very pleased with your service and the fast delivery time. We give it 5 stars.

Lifted both drawer runners removed the broken post, put new post in place. Job completed in lest than two min.

At first I went to a local part supplier and they didn't have it in stock but could order it for me for $55.00 plus $10.00 to ship it. I told them I would have to think about it. I went home and got on the computer and found your web site and was I shocked when I saw the same part listed for $6.98 and $7.00 to ship it. You guys saved me $50.00. The part arrived in two day and took 5 min. to install. I now have light in my refrigerator. Thank you.

Cleaning up the broken glass was the hardest part (Even went into the garbage disposal!). But ordering a replacement shelf was as easy as typing in the refrigerator model number on the PartSelect website. Easy installation after prompt shipment arrival by FedEx.

Removed broken rails and replaced with new rails

After disconnecting the electricity. I followed the instructions as indicated in the "HOW TO" article on the website. I used a steel putty knife and pried the light switch out of its retaining hole. I worked the right side the most since this is the side with the retaining clip. After I removed the switch I transferred the two electrical outlets to the new switch and easily snapped it into place. Engaged the electric power and tested the switch.

disconnected el. power to fridge. pried out broken switch with small screwdriner and pulled out w/water pump pliers. installed new switch and pressed into opening.

Went together like a breeze. Only problem now is need to clean rest of frig really well to match handle.

Very simple job. Be careful taking off the small plastic cover for the screw at the bottom of the handle.

I ordered the part and it literally came the next day! Very easy to install but make sure when you take off old handle you save the bottom cover piece before you remove the lower screw. Also save original screws to use again.

I am very happy with Part Select and would highly recommend them. Thank you!!!

Extremely fast shipping. Ordered in the aftertoon, had item in hand the next morning. Easy installation, even for the mechanically challenged like me.

One suggestion though, when asking for a review, you should incorporate the Model Number within the email. I work on obtaining reviews for my company, and I have found that the more work involved to write a review, the less likely people are to do so. Just a suggestion.

I noticed that the refrigerator was having trouble maintaining temperature. Thought it might be time for new one until I found out that a new frig was $5k to $7K. Just happened to notice that the light switch didn't look quite right (was not sitting sqaure to the door). Once I pressed it it came loose. I then realized the the lights were staying on (50 watts of heating). Replaced the switch and the frig started working like new.

1. Removed part from packaging. 2. Cleaned part with foodsafe cleaners. 3. Rinsed thoroughly. 4. Dried thoroughly to prevent frost. 5. Placed bin in freezer. 6. Turned on ice maker. 7. Waited. 8. Discarded first batch to clear supply line. 9. Waited. 10. Enjoyed ice. 11. Provided these inductions.