All Installation Instructions for Estate Microwave TMH16XSD8

replace light blub

removed grill cover, removed bulb plate, unscrew bulb, screw new bulb in socket,put bulb cover back on and screw grill cover back on. no issues whatsoever.

Parts Used:

Light Bulb - 40W

roger from palm coast, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Glass cooking tray for microwave cracked.

All I had to do was lay the new tray in the microwave. Easy as pie. Also, the new tray arrived very quickly.

Parts Used:

Glass Cooking Tray

Sharon from Kannapolis, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Replace filters

For grease filter, just slipped it in outside area. For charcoal filter, unscrewed the top of microwave and replaced existing filter, then screwed back the top.

Parts Used:

Grease Filter

Charcoal Filter

David F from BONITA SPRINGS, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Missing bracket for mounting microwave oven

Attached bracket to wall with screws and hung microwave oven. Very easy project.

Parts Used:

Mounting Bracket

Timothy from Reno, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Needed a clean filter

Stood on a step stool (microwave over stove), took off the one panel,removed old filter and put in new one

Parts Used:

Charcoal Filter

Ethel from New Berlin, WI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

The capacitor was melted in the microwave

My husband open the microwave and see the capacitor melted. He try to find the piece in store,but unfortunatly he didn't find any. I found the piece on the web and ordered it. My husband replaced the part easily. The microwave work very well.The microwave was to our friend. He did replace it by a new one. Now we have a new microwave with a fan.

Parts Used:

Microwave Capacitor

Jocelyne from Fort Pierce, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Broke glass tray

Arrived in 24hours!!! Great.

Parts Used:

Glass Cooking Tray

Katherine from Cleveland, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Reminder signal and message to change filter on microwave digital display.

Removed 2 screws on the top of the microwave and removed top/front piece of microwave. Slid out old filter (which didn't look dirty at all) and replaced it with the new one. Replaced top/front piece and 2 screws. It took less than 5 minutes.

Parts Used:

Charcoal Filter

Susan from North Olmsted, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

broken glass cooking tray for microwave

Twas really easy considering that all I had to do was place the plate back in the microwave. Easy Peasey

Parts Used:

Glass Cooking Tray

Vanessa from Atlanta, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

broken glass microwave tray

Tray arrived in a short period of time and was a perfect match.

Parts Used:

Glass Cooking Tray

Ronald from Rhinelander, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

The glass tray in the microwave got chipped while i was washing it and started to crack.

I just opened the box and set it in. Took all of two minutes.

Parts Used:

Glass Cooking Tray

Amber from Loretto, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Burn't out bulb.

Removed the glass cover and replaced the bulb. Very simple.

Parts Used:

Light Bulb - 40W

Carter from McCordsville, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Clearing the clean code was the hardest part.

I had no problem installing the new filter. Just used a phillips screw driver to remove the two screws holding the vent cover in place. Cleaned the dust out of the ducts and reinstalled the new filter. The screws must be held to the screw driver with your finger tips so you don't drop them in the vent cover. The most difficulty I had was in clearing the clean code from the screen. There are no instructions in the owners manual for doing this. But after several tries I got it.

Parts Used:

Charcoal Filter

Wayne from New Berlin, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

rotating glass dish assembly making stange noise

The lady in the Nova Scotia call center should get all the credit for being able to identify the part I needed from only the very limited information I was able to give her. Employee of the month for her. She also had such a great can do attitude. Lawence Baier

Parts Used: