All Installation Instructions for LG TCW2013OS

Magnetic Door Plunger would stay on washer and not stay in door.

Use just your finger to push it into place. VERY EASY

Parts Used:

Magnetic Door Plunger

SHIRLEY from HARTFORD CITY, IN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

w/d repeatedly fills with water during warm or hot loads

E. Z. hardest part (which isn't hard) was moving the appliance to reach the back, then putting the appliance back into place. the actual repair (swapping out valve) took less time than that to do.

Parts Used:

Water Inlet Valve - Hot

kevin from WASHINGTON, DC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

None

Took the one off that was leaking and put the other one on

Parts Used:

Inlet Valve Assembly

Keineth from DALLAS, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Plunger/magnet capsule fell out of door recepticale because plastic locking tab broke off

Simply inserted new plunger/magnet back into door with thumb&finger until you hear the little locking tabs click. No tools required.

Parts Used:

Magnetic Door Plunger

Jo Ann from WYLIE, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Washer shook in spin cycle

Took front of machine off to access 2 shocks, put back together then removed panel in back to access third shock, watched YouTube video first so things went smooth

Parts Used:

Shock Absorber Kit

Kenneth from CONESUS, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Drum spring broke

Removed top panal found broken parts and pieces, replaced spring and plastic spring holder. Straightened out and reattached drum front boot.

Parts Used:

Holder

Todd from LAKEWOOD, CO
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Leak in top washer hose

Super straightforward to diagnose and repair.

There was puddle under the washer.

I removed the top (screws in rear, slide top toward rear slightly and lift) and followed the trail of water up to the top washer hose between the drum and detergent tray.

Two hose clamps to remove and replace, then replace the top and ready to go.

Parts Used:

Washer Hose with Bellows

Jason from S HAMILTON, MA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Leaking hose

2 hose clamps and a hose, easy! This would be a very common cause of leaks in washers due to all the movement inside.

Parts Used:

Washer Hose with Bellows

David from SAINT CHARLES, IL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

broken retainer

pops right into hole

Parts Used:

Magnetic Door Plunger

Gloria D. from MEMPHIS, TN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Door plunger had a broken tooth and would not stay in place.

Just put in the new one.

Parts Used:

Magnetic Door Plunger

Larry from IOWA PARK, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Magnetic door plunger broke off, then got stuck inside the door and couldn't be removed for replacement.

I used another magnet to pull the old plunger out of the door and replaced it with the new part.

Parts Used:

Magnetic Door Plunger

Anne from MONROE, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

TE error. Replaced heater / thermistor assembly.

removed top and front. heater is at the base of the tub. the nut compresses the rubber seal and may take some wiggling to remove the old one.

Parts Used:

Heater Assembly

Andrew from BOTHELL, WA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

CONNECTOR NOZZLE, LEAKED

Took off top of washer to get access to connector nozzle, which is on top front of washer rubber boot. removed old nozzle, installed new one. Easy peasy

Parts Used:

CONNECTOR,NOZZLE

Sergio from MADISON, WI
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Dishwasher would not fill

Used Youtube to look for a set of repair instructions. From start to end 35 min.

The difficult part was getting the door back on. Only 1 Youtube video I watched stated Do not remove the 2 center screws at the top. Wish I had seen that video first.

Overall very easy to do.

Parts Used:

Water Inlet Valve - Hot