All Installation Instructions for General Electric Refrigerator TBX22PRYCLWW

Rust in ice

Replaced auger and front helix kit.

Parts Used:

James from Corpus Christi, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Broken side rail to vegetable bin

Took the old frame apart - two screws - replaced broken side rail and put frame back in frig. replaced glass shelf and bins. Frig good as new. 15 minutes. Pretty good for and 81 year old lady.

Parts Used:

Vegetable Drawer Slide Rail - Right Side

Eleanor from Elko, NV
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

Was this instruction helpful to you?

Flapper was warpped

Follow instruction on the video you provided

Parts Used:

Dispenser Door Assembly or Flapper

Luis from Chester Springs, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

drawr slide broke

followed instructions from video on your site

Parts Used:

Vegetable Drawer Slide Rail - Left Side

Beverly from St Louis, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

ice dispenser chute kept freezing with condensation

The flapper on the ice chute was curled up and not creating a good seat, so the chute kept clogging up with frozen condensation, especially during the humid summer months. The online video made it so easy to replace the part myself. I was able to fix the problem in under 15 minutes and at a fraction of the price!

Parts Used:

Dispenser Door Assembly or Flapper

Gregory from Hughesville, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Ice flapper replacement in freezer door

Looked at the instructional video and read previous customer comments. Didn't have to dissassemble rear of freezer door. Access through the front once trim ring and circuit board removed. Could not have done it with out the video/and or previous customer comments. Part was shipped and received immediately. Repairs complete! No more frost developing and plugging ice chute! I especially appreciate the customer comments on how to complete this repair!

Parts Used:

Dispenser Door Assembly or Flapper

Chris from Houston, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Frost build up in ice maker

Watch online video on how to change icemaker flap! Video was great exactly how to do it, with a link to order the part

Parts Used:

Dispenser Door Assembly or Flapper

Christopher from Durham, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Ice Dispenser Door Seal not sealing, frost in freezer

Googled how to replace the door seal, ordered parts and replaced the door seal flapper. The video on partselect was not correct for this GE model. However a simple diagran showed you simply remove the control panel directly (pops off) to provide access to the panel. Remove the 4 screws holding the panel, replace the door seal, and reassemble.

Parts Used:

Dispenser Door Assembly or Flapper

Thomas from Mooresville, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Heavy frost was forming where ice is dispensed

Watched the PartSelect video. Very simple and solved the problem. Very pleased with the repair and PartSelect.

Parts Used:

Dispenser Door Assembly or Flapper

Thomas from Austin, TX
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

right side slide rail broken

pull the front cover off, take the two screws out and the side rail comes right off, put the new one in place, put the screws back in and bang!.....all done. Took longer to take the stuff out of the fridge than to make this repair.

Parts Used:

Vegetable Drawer Slide Rail - Right Side

Keven from Fleming Island, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

broken rail

Just follow instructions

Parts Used:

Vegetable Drawer Slide Rail - Left Side

Vegetable Drawer Slide Rail - Right Side

leonard from albany, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Inside freeze was frosting up

used a flat screwdriver to pop off out side cover then remove 6 screws took off plate. Pulled off the flapper and replaced. less the 15 mins and fixed the issue

Parts Used:

Dispenser Door Assembly or Flapper

Dennis from Glendora, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Frost buildup in the freezer near the ice chute.

I watched the video on the PartSelect.com website and decided to give it a try. The replacement of the flapper was even easier than I anticipated! The old flapper was extremely warped and was allowing air into the freezer. I'm not sure how/why it was in that condition but I am happy to report that I have no more ice buildup. Thank you, PartSelect!

Parts Used:

Dispenser Door Assembly or Flapper

Brenda from Little Elm, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Frost in and around ice maker outlet

Followed the video directions. Spent about 5 minutes and I was done. Very easy to do. Problem with frost is gone. The video makes it easy to remove the plastic parts without any damage.

Parts Used:

Dispenser Door Assembly or Flapper