All Installation Instructions for Whirlpool Range RS3025XBW1

burner element was not working right

Since it was a plug-in burner, only needed to pull it out and put the other one in.

Another thing I would like to say is that I was very well pleased with the service from partselect.com. I was unable to find the burners in my area.
Was very helpful in selecting the part and was very efficient in sending it.

Parts Used:

Surface Burner - 8 Inch - 2600W

Janet from Uniontown, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Would no longer heat up

Removed the old broken burner and slid the burner prongs into place. Very EASY to replace!

Parts Used:

Surface Burner - 8 Inch - 2600W

Scott from Lakewood, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

burner made popping sound and began shooting sparks from one of the rings

extremely easy to replace the burner. I just pulled out the old burner and replaced with new one. The whole process took less than ten minutes.

Parts Used:

Surface Burner - 8 Inch - 2600W

Raul from Oak Hill, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Burner Would Not Heat

One screw taken out, 2 wires switched, new part & screw put in. Burner like new!

Parts Used:

Range Surface Burner Plug-In Block Kit

David from Toledo, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

contacts had gotten burnt out/blackened with age so burner was intermittent.

lifted the cover, unscrewed the ceramic wire fastners, put the new part in, and voila, job done and working perfectly

Parts Used:

Range Surface Burner Plug-In Block Kit

john from reading, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Burner sit uneven and plug in socket bad

Clipped and rewired plug in socket and put new burner in

Parts Used:

Surface Burner - 8 Inch - 2600W

Range Surface Burner Plug-In Block Kit

Brenda from Charlotte, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Hole in Cooktop Burner

Simply removed new burner from box and plugged it in! Very pleased with 3 day speedy delivery. Confident my 32 year old cooktop will continue to give many more years of service with any parts needed from PartSelect.

Parts Used:

Surface Burner - 8 Inch - 2600W

Sherrill from Houston, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

needed to replace one burner

the part arrived in two days. Just had to remove the old one and pop in the new one and it was that easy. I was amazed at how soon the part was delivered and happy to have a working burner again.

Parts Used:

Surface Burner - 8 Inch - 2600W

Donna from Carver, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Wire broken off plug in block

Removed old block , cut off wires , used new wire nuts, heat shrink , supplied with parts , job done lowered range top went fishing ...

Parts Used:

Range Surface Burner Plug-In Block Kit

Robert from Phillipsburg, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

intermittent heat from burner

Pulled out electric heating element and replaced with new. I have had this frustrating problem for 2 years and after replacing the elements they now work like new! My only question, why did it take me so long to replace???

Parts Used:

Delta Frame Surface Unit - 6 Inch

Brian from Westport, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

burner stop heating

pulled out old burner and pushed in new burner.
No tools needed.

Parts Used:

Surface Burner - 8 Inch - 2600W

Pastor Shelly from Sumter, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Wire broken going to one electric plug for burner

Replace the connector and bracket, spliced the wires, put heat to the schrink wrap and I was done.

Parts Used:

Range Surface Burner Plug-In Block Kit

John from Shelby Township, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

no heat from burner

I raised the stove top, read the instructions to my son while he did the work, then I lowered the stove top, installed the burner, and it worked like magic.

Parts Used:

Range Surface Burner Plug-In Block Kit