RF268ABBPXAA Samsung Refrigerator - Instructions

had to replace the spring on the Mullion door . the how to video helped however the demonstration shows putting the spring on in the opposite way that my door calls for, so just I turned the spring around and done, other than that easy as pie.
thanks
Chris F.

removed the front food tray
removed the broken ice maker shut off arm from the left side of the ice maker using a short Phillips screw driver, very little room between the
ice maker and the side of the fridge.
secured the new ice maker shut off arm with the same Phillips head
screw, the arm self positions via a locating notch

Replaced the spring on my French door refrigerator
Was super easy

Lifted out the broken part and replaced with new spring.

Extremely simple, remove the old tray brackets and snap the news one in place. Put just enough pressure till you here them click in place.

after receiving spring installed spring in seconds. Thanks partselect.com Ryan Cappell

It was easy! I just used an alan wrench to losen the side bolt, then slid the handle into the new mounting screws that I had hand-screwed and then tightened it all up.

pushed new spring in.

The replacement was fairly simple. I removed the existing tray and detached the water line. Once the water line water reattached to the new tray I inserted into the ice maker.

*** The problem I'm having now is the water is not filling up the tray***
Not sure what I did wrong? Any help would be greatly appreciated!!!