RB1005XYN3 Whirlpool Wall Oven - Instructions

The part came as promised & and it was exactly the right part! I turned off the breaker to the oven (the oven has a clock and timer on it too). Unscrewed the 2 screws with a Phillips screw-driver and carefully removed the old part - being very careful to be safe and not make a big mess. It was easy to disconnect the wires and get the old element out. Then connected the wires to the new element, placed into position, screwed in the 2 screws, and turned on the breaker. It worked great. Then set the clock because it was 13 minutes slow!

Really easy repair. Take two screws out, unplug two wires. remove old element, reverse steps with new element. Part arrived in two days, it was the best price I found also.

I tokk two srews out, pulled element out, disconnected wires, put wires on new element, put screws back in, turned the breaker back on , now oven heats up fine.

turn off electric breaker, unscrew the 2 screws unplug the 2 ends replace old element with new repeat previous steps but unfortunately the control panel was also failing and that item has been discontinued.

After figuring I'd have to buy a new oven, I figured out that it was the lower baking element. When I received the new part, I removed the two screws holding the element on. Gently pulled the element off the back oven wall and removed the wire connectors. Put the new element in place - rehooked the wire connectors and it works like new. The light bulb replacement was as simple as screwing in the new light bulb. Thanks, saved me alot of money.....

ordered new broiler pan

Thanksgiving one week away oven broke. I ordered parts on line and was ready to cook our turkey. Ordering on-line saved my Thanksgiving!
We were so happy

The hardest part was taking out original light bulb because screws on shield where hard to unscrew after all this years . The old bulb vent out leaving neck in socket. It took narrow electrical pliers to get neck out .The generic appliance bulb did not fit and had aluminum neck ,not recommended for brass sockets in ovens.Putting new light bulb in was not the problem.

Screwed in light bulb and glass protector

Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you

My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.

unscrewed two screws, unpluged two wires, put screws back. turn off power!

very easy

Unscrewed two small screws and took the old element out, and installed new element. It took less than ten minutes to repair. The new element works beautifully.

1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes