All Installation Instructions for General Electric Refrigerator PFSF6PKWAWW

on the french doors my granddaughter kept turning the inner seal bar when the door was open and when we went to close it it was in the wrong position and eventually the upper hinge broke

I took a small straight screw driver and popped the cap case off, removed old hinge and installed new hinge and snapped the cap back in place.. took all of 30 seconds

Parts Used:

French Door Hinge

CAP CASE FRENCH

david from bridge city, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Ice Bucket cracked, Ice Maker leaking and making noise

I unplugged the fridge. I removed the old ice bucket, removed the screw on the cover for the ice maker cord, unplugged the cord, pushed in the clip that holds in the ice maker, pulled down and slid the ice maker towards me. It came right out. I replaced everything in reverse order. It all works great. I did verify my main control bord was at an updated release level before replacing the Ice Maker. Some of the sites I found said that both need to be replaced do not meet the recomended rev level. I don't remember what they were, I wasn't expecting to submit any instructions.

Parts Used:

Ice Bucket Assembly with Auger

Ice Maker Assembly

Jason from Urbandale, IA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Spring broke

Installed new spring pin and spring. Took only 2-3 minutes. It was more difficult to get the correct part since the spring pin was the only number listed in the part diagram and I actually needed the spring and had to call customer service to get the correct part number.

Parts Used:

French Spring Pin

Sharol from Culdesac, ID
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

One of the pins holding the frame broke.

I had to remove the clear plastic from the old part and install it on the new frame. I put the plastic in first and could have easily broken a pin. There should be a recommendation to put the frame in when it can bend a little and reduce the chance of breakage again. Put the clear plastic piece back in after the frame is in. That would have been much easier.

Parts Used:

Pantry Cover Frame - White

Michael from Lebanon, OH
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Poor water and ice taste, filter a few years old.

Very simple, I followed instructions sent with the filter. Twisted old filter clockwise 1/4 turn to remove. Filled new filter with water, lined up arrow on filter to arrow on refrigerator, and then turned 1/4 turn counterclockwise. Filter raised and seated itself. Wiped few drops of water from refrigerator shelf.

Parts Used:

Refrigerator Ice and Water Filter

David from San Antonio, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

replace water filter

Easy, with included video and instructions

Parts Used:

Refrigerator Ice and Water Filter

Richard from Waynesboro, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Change Filter

My 14 year old Son

Parts Used:

Refrigerator Ice and Water Filter

GREGORY from SACRAMENTO, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Ice and Water Filter needed replacement

It was easy and fast, like changing a light bulb. The directions were clear and easy to follow. Thank you.

Parts Used:

Refrigerator Ice and Water Filter

Irene from Tigard, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

did not need adapter

exactly as the instructions.......never did see anything about replacing the adapter...therefore i did not

Parts Used:

Refrigerator Ice and Water Filter

terry from fort worth, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

the icemaker was making noise

I figured out how the whole thing worked by taking it apart. After several attempts to clear the passageways of ice that were getting stuck, I had a repairman out to take a look. He wanted $350 for the repair and replacement. I paid the $89 truck charge and sent him on the way. (He did take five minutes and sort of fix the french door close mechanism which also is failing, but that's another issue.)I ordered the part and plugged it in to the receptacle in the ice compartment. Savings: about $150. Now I have ice! Thanks Part select!

Parts Used:

Ice Maker Assembly

Linda from Tampa, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Drawer was left open when doors were shut. Broke one of the pins that holds the drawer cover in place

Removed the clear plexiglass window. Cleaned it with soap and warm water preparing it to be installed into the new Drawer Cover Frame. Re-installed the Plexiglass into the new frame and mounted cover assembly to its fixing place.

Parts Used:

Pantry Cover Frame - White

Colby from Midlothian, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

crack by the middle of vegi drwaer

easy slide out and put new one

Parts Used:

Vegetable Pan Cover and Glass Assembly

Carole from Sunrise, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Ice Bucket housing had broken

Simply removed broken part and replaced with new one.

Parts Used:

Ice Bucket Assembly with Auger

Thomas from Pickerington, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Broken pantry flip lid cover

1.) Remove produce drawers above deli drawer. (2). Place right side pin of deli drawer cover into hole. Note that hole on right side has a raised lip so you need to insert this side first. (3). Sprayed PAM cooking spray on deli drawer near hole on left side. (4). Slide left side pin on deli cover into hole on left side. 5 minute job, quite easy. Use cooking spray to lubricate the pin so you don't have to force it into hole on left side and risk breaking it.

Parts Used: