PAFC430 DeVilbiss Compressor - Overview
Models starting with PAFC430
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Nut
PartSelect #: PS9868378
Manufacturer #: 038738-00
This is a genuine replacement part manufactured for use with outdoor power equipment and air compressors. This nut is used to fasten various part assemblies on a range of different products. This nut ...
$5.95
Special Order
KIT MUFFLER FILTER
PartSelect #: PS12520510
Manufacturer #: KK-4981
This is a manufacturer approved replacement muffler used on air compressors. Muffler softens the noise coming from the engine and provides an additional filtering. This Kit includes the Plastic Filter...
No Longer Available
ASSY NUT SLEEVE 1/4
PartSelect #: PS12531292
Manufacturer #: SSP-7811
It is an OEM component which is designed for use with air compressors. This special nut sleeve assembly secures the pressure relief tube to the pressure switch. It is a high-quality replacement for a ...
$5.95
Special Order
KIT CONNECTING ROD L
PartSelect #: PS12477933
Manufacturer #: KK-4835
This rod kit is an original part from Craftsman for air compressors. This part attaches to the piston to the crankshaft that is in the pump. This kit includes the following: cylinder head, piston, cyl...
No Longer Available
Screw .250-20x.750 H
PartSelect #: PS12466326
Manufacturer #: 91895680
This replacement screw is a genuine OEM sourced item commonly utilized on air compressors and pressure washers. It is a standard hardware which has multiple applications depending on the unit. Please ...
$6.53
Special Order
VALVE SAFETY 150 .12
PartSelect #: PS12466664
Manufacturer #: 97503734
This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions and does not turn the motor off when the amount of pressure ...
$12.99
Special Order
Common Symptoms of models starting with PAFC430
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The air was bypassing the compressor gaskets and cylinder wall was worn out
1 remove cover
2 unhook air line to tank
3 remove head bolts
4 remove intake from head
5 remove flywheel bolt to free up pump piston
6 remove screw on top of piston to change out gasket
7 remove the cylinder sleeve install piston from the top
8 reassemble piston rod end and the flywheel
9 on the head cover are two gaskets one on top and one on the bottom head
10 insert intake piece and bolt the head cover back in place
11 reinstall the air line and unit cover and secure with three cover screws
2 unhook air line to tank
3 remove head bolts
4 remove intake from head
5 remove flywheel bolt to free up pump piston
6 remove screw on top of piston to change out gasket
7 remove the cylinder sleeve install piston from the top
8 reassemble piston rod end and the flywheel
9 on the head cover are two gaskets one on top and one on the bottom head
10 insert intake piece and bolt the head cover back in place
11 reinstall the air line and unit cover and secure with three cover screws
Parts Used:
-
Charles from GARRISON, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
18 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!