NEC3240FW0 Amana Dryer - Instructions

Simply put it in the exhaust hole.

My husband is the one who fixed the door. He said he just popped it into place and was done in just a couple of seconds! The best part though was the quick service we received. . . I ordered the part around 10:30 in the morning, and it was at my front door by 5pm the next day!!! What great service!!!! We will definitely do business again with partselect. Com if we ever need more parts.

Popped the latch out and popped a new one in.

The real story here is that there was an ANSWER and a SOLUTION, to what was a GREAT
annoyance. If I wouldn't have found a part, I may have run off and bought a new dryer, when I really didn't need to, or paid A LOT of money for a repair man to come out. THANK YOU for your service. You made my life easier.

I ordered the door catch kit on a Wednesday at it arrived Saturday AM. It took less than 1 minute to pry out the old catch with a flat screwdriver and pop in the new one!

Removed old catch and strike with screwdriver and needle nose pliers. Installed new parts. My old catch did not have comparible numbers so I just used the yellow one. Worked fine.

very smooth with your video instruction help

Take out the two screws the hold the lint screen filter compartment in place. Remove the two top clip retaining screws, and lift the top LOOSE and turn it a bit out of the way. I didn't find it necessary to remove the top. Unclip the two wire electrical connector at the top - front, and remove the 1/4 " screws the secure the front. Lift the front up and out of the way. Slide the drum belt off the tensioner and moter pulley and slide the drum out the front. Remove and install the rollers ( and its just that quick) and while your in there. Clean up a bit ... cant hurt right? Especially on and around the motor. Reverse the procedure but rotate the drum a few turns to properly position the belt. Total E.T. is maybe 20 minutes and on a 1 - 10 scale for "degree of difficulty ". This is about a 2. Save the money and do it yourself.

watched repair video and fixed dryer.

Took off the out cover of the dryer unit. Removed the drum. Then replaced the roller

popped open top, removed two springs on lower end of front panel.took off same panel, pulled drum forward, pulled jesus clips from roller pins ,took off old rollers and replaced with new rollers and clips.

before i describe the repair let me tell you about the shipping. I ordered the parts early Friday afternoon and recieved then Sat. morning, almost like they were E-mailed to me. A++ The repair was a simple task that anyone that could find the problem could fix. WORD

I had already disassembled dryer to confirm problem, then I ordered rollers. Once rollers arrived ( and quickly I might add!) I replaced rollers and reassembled in less than 15 minutes - parts ordered were perfect fit.
Thanks!

took the drum out and replaced the wheels there was nothing to it

It was so easy! I simply fit the gasket into the groove where the old one had been. Didn't even need any tools.

The repair was simple as you can imagine. Thought I could buy these legs at any big box store or at least at the local hardware store. No such luck. Partselect had the right product---easy to order and easy to install. Things around here are great.