MH1150XMS2 Whirlpool Microwave - Instructions

PartSelect was the only company to show that the part came in 3 different colors. The grill vent was used to replace a cracked vent. It was simmple to slip in the new vent,but be sure to save the existing screws that holds the vent in place

Placed to new grille on the microwave and attached
with the screws.

Ordered a new motor. Removed the outside trim of the oven-microwave combo. 2 screws at the bottom of the trim. Removed the screws that held the combination micro and oven unit in place. Removed the top and bottom black plastic grill of the microwave. 3 screws each. Pulled the entire unit out about 1 inch exposing the screws at each side of the microwave that hold it in place.
Snapped off the top control panel which exposed the wiring connecting the control panel.
Unplugged a couple of wire harness units to free the control panel.
Be sure to label the units to know which goes where during reassembly.
Remove the microwave unit from the housing and place it on its side.
Remove the metal plate that houses the motor. 4 screws hold the motor in place. Disconnect the 2 wires from the old motor and you are ready to install the new motor. Be sure to TURN OFF THE POWER to the unit at the breaker box and remove the turntable from inside the microwave.

Unscrewed glass panel, removed old bulb, cleaned glass panel and installed new bulb. Screwed panel back into place.

replaced with new one

This is a very basic job that a ten-year-old can do. Simply remove two screws at the top of the unit, remove the broken pieces of grill, snap the new one in place, and replace the screws. Oh, yes, I also cleaned out the foam and aluminum filter and cleaned some of the grease from behind the filter.

Replaced the missing tray and unscrewed a couple of screws to remove broken grille tabs and retightened the screws to hold in the new grille. Very successful and very easy. Thanks

rEMOVE FRONT OF DOOR (3 SCREWS ON SIDE), PUTTY KNIFE TO EDGE of dorr to free front of door. Unscrew 2 screws and install new handle.....Keypad: One screw out , lift assmebly up and out; remove old keypad, change tape connrction, replace pad...

Replacement part was perfect and a quarter the price of the brand name grill. Snapped it in, tightened 2 screws, done! Also delivery of the part was almost overnight. You guys are the greatest.

Removed one screw lowered glass cover removed burned out bulb replaced with new one put glass back reinstalled screw. Dune 5 minutes back in business

Glass plate arrived in less than two days. Placed the glass plate in Microwave and presto the microwave works like a charm.

I remove the old broken Grill Vent by loosing two screws and just put the new one and adjusted with the same two screws.

Fitted the grille in place and tightened the screws to hold in place.

First, I ordered the part.The part was sent to me within 2 days.Then,I removed the old one that was always falling off and mounted the new one. It was a perfect fit.

Repair was very easy. We were more impressed with your selection and ordering process. Very quick as was needed for this job to be completed. Our customer was impressed that we found the part and that we were able to get it in so quickly. You helped us continue our professional service. Thank You