Order within the next 6 hrs and your part ships today!
Questions And Answers for LREL6323S
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ray
October 24, 2023
one of the digits on the display is missing a segment
For model number LREL6323S
Hello Ray, thank you for your inquiry. You may need to check the wiring connections on the control board. If the wiring is not faulty, then you may need to replace the display control board, part number PS16223753, to fix the issue. Glad to be of assistance!
Oven does not maintain 350,will do fine above 375+
For model number LREL6323S
Hi William, thank you for the question. Based on our understanding, we would recommend checking the main control board, part number PS16223748. It manages the functions of the range, such as heating and temperature. You may need to replace it to fix the issue. We hope this helps!
example set oven temp at 300 oven heats to only 250
For model number LREL6323S
Hi Joe, thank you for your inquiry. Based on our understanding of the issue, we would suggest you checking the temperature sensor, part number PS11732697. Glad to be of assistance!
I need a complete replacement of the cooktop. Mine is completely shattered.
For model number LREL6323S
Hello Brandy, thank you for getting in touch. The part you are looking for is part number PS16223111. If you need help placing an order for it, please feel free to give us a call!
Go onto youtube, such as https://www.youtube.com/watch?v=-ITkrwhDNMQ and watch similar videos for DYI. The process is very similar to other models.
Once the door is removed, place oven door on a towel or soft place so it does not scratch the door. Unscrew the screws and make sure you notice where each screw goes, so you know the process of where each screw goes when you re-assemble.
Once the inner cover is removed, remove the insulation, too so you don't damage it. Use Wet/Dry Shop Vac to clean the shattered glass. (WORD OF ADVICE: I did not remove the insulation and the suction of the Shop Vac removed part of the insulation, so now instead of a quick turn around repair turns into a few weeks repair, because the insulation is on back order 10-14 days from the supplier. DON"T MAKE THE SAME MISTAKE!)
Once the glass has been removed, the new inner glass is replaced, begin by re-assemble the oven door with the correct screws and attached the oven door to the range.
Dropped a hammer on the range while removing a ceiling light. Viewed a How-To video on Google. Ordered the needed parts. Followed the steps from the How-To video. Reinstall was a bit tricky by myself - could have used an extra set of hands. I have a few words of caution: 1) Put something between the range top and range - like a sheet or drop cloth - to prevent a dropped screw from falling into a crevice in the stove. I dropped a screw and was unable to retrieve it, even with a magnet. 2) Makes sure you remove all bumpers, screws, clips, etc. from the item being replaced and put them on the new item if the new item does not come with replacement bumpers, screws, etc.
Checked element no reading. Took off back panel and removed element. Took 5 days to get element. Put in new one. Took 20 minutes. Did not have to cut panel as video had shown. It had screws and was easy to get out and put the new one in. The new element was exactly the same as the old one. I checked all elements before ordering. Was satisfied with everything but the delivery time