This temperature sensor, also referred to as a thermistor, is a genuine replacement component compatible with various appliance models. It works in coordination with the control board to monitor inter...
This rotary switch helps you control the heat on your range burner. It adjusts the power when you turn the knob, giving you the right temperature for cooking. If your burner isn’t responding or the kn...
As an avid home cook, you know the importance of a properly working oven and how crucial the Bake Element is to your range cooker's heating process. That's where this LG Bake Element comes in. Located...
Is your LG range oven stove not heating quite like it used to? The Radiant Surface Element could be just what you need. This genuine LG part is specifically designed to provide heat directly to your r...
This genuine heating element fits select LG ovens and ranges, providing heat for broiling and baking. Located at the top of the oven, it ensures even cooking and reliable performance. It replaces olde...
This oven door panel helps keep heat inside your LG range so your food cooks evenly and efficiently. It also gives your appliance a clean, finished look. If the outer door is damaged or loose, replaci...
Do you have an LG range that's not heating as it should? Our replacement part can solve your problem. This LG OEM part uses radiant heating technology to directly heat your range's cooking area. It's ...
$140.95
Special Order
Questions And Answers for LREL6323S
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jorge
October 17, 2024
I have no control on the stove. The burner doesn’t work properly It turns on but gets very hot and rarely goes down.
For model number LREL6323S
Hello Jorge, thank you for your question. You issue is likely the Infinite Switch PS12750413 or PS16223554. You can test it with a multimeter. If there is no continuity between L1 and H1 or between L2 and H2, the infinite switch is defective. If there is no continuity between P and H1, the indicator light circuit is defective. We hope this helps.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Don
June 16, 2025
I need a replacement clock
For model number LREL6323S
Hi Don, thank you for contacting us. The display control board you are looking for is part number PS16223753. We hope that helps!
my stove is lrel6323s / 00. the select above in the model number did not allow me to distinguish which of the three lrel6323s to pick from. I need a new swith but it has to be the one with the dual burner. when looking for the switch I do not see one the list one with dual burner ( a small burner and a large burner on the same spot. beside the know it also shows ultraheat. which switch is this
For model number LREL6323S
Hello Barry, thank you for reaching out to us. According to our research, the dual burner switch you are looking for is part number PS17631122. We hope this information helps!
Dropped a hammer on the range while removing a ceiling light. Viewed a How-To video on Google. Ordered the needed parts. Followed the steps from the How-To video. Reinstall was a bit tricky by myself - could have used an extra set of hands. I have a few words of caution: 1) Put something between the range top and range - like a sheet or drop cloth - to prevent a dropped screw from falling into a crevice in the stove. I dropped a screw and was unable to retrieve it, even with a magnet. 2) Makes sure you remove all bumpers, screws, clips, etc. from the item being replaced and put them on the new item if the new item does not come with replacement bumpers, screws, etc.
Go onto youtube, such as https://www.youtube.com/watch?v=-ITkrwhDNMQ and watch similar videos for DYI. The process is very similar to other models.
Once the door is removed, place oven door on a towel or soft place so it does not scratch the door. Unscrew the screws and make sure you notice where each screw goes, so you know the process of where each screw goes when you re-assemble.
Once the inner cover is removed, remove the insulation, too so you don't damage it. Use Wet/Dry Shop Vac to clean the shattered glass. (WORD OF ADVICE: I did not remove the insulation and the suction of the Shop Vac removed part of the insulation, so now instead of a quick turn around repair turns into a few weeks repair, because the insulation is on back order 10-14 days from the supplier. DON"T MAKE THE SAME MISTAKE!)
Once the glass has been removed, the new inner glass is replaced, begin by re-assemble the oven door with the correct screws and attached the oven door to the range.
You just pull out the clip but the the hard part is doing that without bending the metal hole the holds the clip. If you do bend the hole the clip will not fit flush. Just get a flat screwdriver and reshape the whole.
