This temperature sensor, also referred to as a thermistor, is a genuine replacement component compatible with various appliance models. It works in coordination with the control board to monitor inter...
$59.35
In Stock
Order within the next 12 hrs and your part ships today!
This rotary switch helps you control the heat on your range burner. It adjusts the power when you turn the knob, giving you the right temperature for cooking. If your burner isn’t responding or the kn...
$85.41
In Stock
Order within the next 12 hrs and your part ships today!
This genuine heating element fits select LG ovens and ranges, providing heat for broiling and baking. Located at the top of the oven, it ensures even cooking and reliable performance. It replaces olde...
$142.24
In Stock
Order within the next 12 hrs and your part ships today!
This oven door panel helps keep heat inside your LG range so your food cooks evenly and efficiently. It also gives your appliance a clean, finished look. If the outer door is damaged or loose, replaci...
$298.53
In Stock
Order within the next 12 hrs and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Oscar
February 27, 2025
LED display numbers are missing little bits of some numbers so that an 8 looks exactly like a 3. Model number is LREL6323S(01). Please send ordering information for the needed part.
For model number LREL6323S
Hello Oscar, Thank you for getting in touch. The LED display is part of the Main PCB Board Assembly PartSelect Number PS16621830. This board will need to be replaced. Thank you for the inquiry, good luck with the repair!
Led screen is going out. Can't read the time display
For model number LREL6323S
Hello Andy, thank you for your question. This issue sounds like you will need to replace the Range Display Board is PS16621830. We hope this helps.
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Greg
December 24, 2024
Dropped my drill repairing kitchen cabinets. I need to replace the glass ccoktop. It seems like the part No. from the diagram is 3095. Cannot seem to find it on your site. Please help so I can order one.
Thank you
For model number LREL6323S
Hi Greg, thank you for contacting us. The plate assembly you are looking for is part number PS16223111. Glad to be of help!
Hello, my oven will reac set temperature and then the temperature slowly goes down not maintaining temp. I already replaced the thermostat and have the same problem. Cannot find a replacement control board? Also there is a 0/1 on the end of the model number that doesn’t fit criteria here. lR6323S0/1 Thank you.
For model number LREL6323S
Hi John,
Thank you for your question. The part number for the main control board is PS16621829. We hope this helps!
Dropped a hammer on the range while removing a ceiling light. Viewed a How-To video on Google. Ordered the needed parts. Followed the steps from the How-To video. Reinstall was a bit tricky by myself - could have used an extra set of hands. I have a few words of caution: 1) Put something between the range top and range - like a sheet or drop cloth - to prevent a dropped screw from falling into a crevice in the stove. I dropped a screw and was unable to retrieve it, even with a magnet. 2) Makes sure you remove all bumpers, screws, clips, etc. from the item being replaced and put them on the new item if the new item does not come with replacement bumpers, screws, etc.
Go onto youtube, such as https://www.youtube.com/watch?v=-ITkrwhDNMQ and watch similar videos for DYI. The process is very similar to other models.
Once the door is removed, place oven door on a towel or soft place so it does not scratch the door. Unscrew the screws and make sure you notice where each screw goes, so you know the process of where each screw goes when you re-assemble.
Once the inner cover is removed, remove the insulation, too so you don't damage it. Use Wet/Dry Shop Vac to clean the shattered glass. (WORD OF ADVICE: I did not remove the insulation and the suction of the Shop Vac removed part of the insulation, so now instead of a quick turn around repair turns into a few weeks repair, because the insulation is on back order 10-14 days from the supplier. DON"T MAKE THE SAME MISTAKE!)
Once the glass has been removed, the new inner glass is replaced, begin by re-assemble the oven door with the correct screws and attached the oven door to the range.
You just pull out the clip but the the hard part is doing that without bending the metal hole the holds the clip. If you do bend the hole the clip will not fit flush. Just get a flat screwdriver and reshape the whole.
