LFX28979SB (AWBCNA2) LG Refrigerator - Instructions

Uncoupled the old connector, replaced with new connector and attached supply line. Repair easy with right part, prior to ordering the right part I had tried a compression fitting and it still leaked. U-tube and others demonstrating repair assured me I was on the right path.

Removed the old basket and replaced it with the new one. Easy as pie.

Changed door switch. Repair worked for a few days but re-occured. Possibly the other switch is bad .

Door holder, really simple, remove two phillips head screws, throw awy old holder, replace with new, reinstall two screws. Door basket, slide out old basket, replace with new. Prices were more than fair, delivery very prompt. Will use again.

I tried looking up the parts list on line as I didn't have the book readily available. This was the site I found that had a nice Break up of the refrigerator and all of the parts. I was able to easily spot the parts I needed, plus the part number and I ordered everything. I received my items quickly and they were packaged well. The installation was very easy and I feel great that I have working parts that look great and I will definitely purchase from these folks again!!!!

Removed 4 Stainless steel screw holding mounting assembly containing ice maker and motor. Unplug large plug from refrigerator inside wall and removed assembly. Closed refrigerator and lay asembly on flat surface. Removed ice maker plug from wire harness. Unscrewed ice maker mounting screws from mounting assembly. Reversed process to install new icemaker. Be sure to turn ice maker plug assembly to fit in holder on back of assembly and tape back in mounting assembly so assembly wil go all the way back in the door without forcing. If done properly, the ice bucket will slide in easily and the door to ice maker compartment will close easily without any problems.

Simply used a flat head screwdriver to get the first few inches of the gasket out of its track and after that just pulled it by hand. New gasket slipped over the door, lined up the corner and pressed into in the track. Checked to see that it was snug all over and we were done. 5 minutes at the very most. Never would have noticed this. Took all the bins out of the freezer to give it a good cleaning and noticed the torn piece hanging. Our refrigerator runs much less often. Expect to see a difference in our electric bill!

We ordered the parts which were relatively easy to identify from the diagrams on the website. They are perfect replacements that just slid into place.