Models > KSB650ES1 > Instructions

KSB650ES1 KitchenAid Blender - Instructions

All Instructions for the KSB650ES1
16 - 21 of 21
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
recessed coupling removal
I tried the method of removing the base, putting the coupling in a vise and turning the shaft(reverse thread). I managed to spread the slot with the screw driver to the point it was no longer an option. I looked on You Tube for ideas and found one. With the base completely assembled, take a flat edged screw driver placed against the coupling (clockwise) strike the end of the screwdriver until the coupling loosens, turn coupling off by hand. I had to beat it, but it worked and now so does the blender.
Parts Used:
Jar Mixer Coupling
  • Duane from Avon, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Blades broke off on the Origional blender
Unfortunately you can not purchase just the blade assembly so I had to order a new jar minus the lid assembly. Just put the jar on the base and I was done. The blades would unbolt from the jar but they are not sold seperately.
Parts Used:
Jar
  • Art from San Antonio, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
My jar was cracked and leaking
Simply replaced the old with the new and swapped the lid
Parts Used:
Jar
  • Jon from Glendale, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The blender jar started to leak at the bottom
Ordered a new jar which came very quickly!
Parts Used:
Jar
  • Susan J from Anderson Island, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Blade drive in bottom of jar got stripped.
Ordered new jar. No other repair needed.
Parts Used:
Jar
  • Denton from Ogden, UT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The rubber blender foot was missing.
Inserted the replacement rubber blender foot in to the socket. Simply pushed it in. Fit snugly. Thanks for being one of the only places you can get a replacement rubber blender foot!
Parts Used:
Foot
  • Lisa from Lexington, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KSB650ES1
16 - 21 of 21
Back to Top