Models > KHM512HT0 > Instructions

KHM512HT0 KitchenAid Mixer - Instructions

All Instructions for the KHM512HT0
31 - 38 of 38
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
bent beater
put new beaters in and all is well
Parts Used:
Mixer Beaters
  • herman from tavares, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Beaters bent
I just snapped in the new beaters and turned it on and they worked perfect. It was a very easy repair.
Parts Used:
Mixer Beaters
  • Kathy from Brainerd, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Old Beater had a broken blade
Ordered a new set of Mixer Beaters from PartSelect drawing info. They arrived in a timely manner. Seem to be a stronger blade and the beater is a little longer than the old. Good operation.
Parts Used:
Mixer Beaters
  • Donald M from Palm Coast, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
beater broke
Pushed the new ones in - no brainer repair - I just want to say thank you for the prompt service
Parts Used:
Mixer Beaters
  • Alicia from Lansing, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
One of the tines became loose.
Received the new beaters and put them in the mixer. End of story.
Parts Used:
Mixer Beaters
  • Judy from Northwood, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Beaters Didn't Fit
I thought this fix would be a cinch, but when I tried to insert them into their respective slots neither beater could be fully inserted to the necessary 'clicked' locking position.
Parts Used:
Mixer Beaters
  • Michael from Seattle, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
One beater came loose from the shaft
Just snapped the beaters into the mixer and it works great.
Parts Used:
Mixer Beaters
  • John from Merced, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
beater came loose at shaft
when mixer was about 1 year old. Complete beater mechanisum cane loose from shaft. Mom was in the middle of baking some cakes, so I took the shaft and beater down to my garage and drilled a straight hole through the beater collar and shaft the threaded it through and installed a screw which after installing I peened over the ends so it wouldnlt come loose. Thie repair lasted longer than the original part by a lot of years. Now the beater became loose on the shaft and was woobelng so I bought a complete new beater assy.
Parts Used:
Mixer Beaters
  • william from pittsburgh, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KHM512HT0
31 - 38 of 38
Back to Top