KHEV01RSS0 KitchenAid Dryer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No heat, everything else worked
Pretty straight forward, only hard part was getting the housing for the heating element out. After that it was plug and play. Added benefit was cleaning out the inside and dryer vent while I was in there.
Parts Used:
-
ERIC from DAYTON, OH
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Dryer had no heat
Opened up unit and followed tech directions on inside pocket to isolate the problem to the heating element. Pulled it out and sure enough it was broken in one place. Found the part on PartSelect and ordered it on Saturday, received it on Wednesday. Replaced the new heating element into the assembly, reinstalled the assembly and connected the wires. Works like new now!
Parts Used:
-
Danny from Woodbridge, VA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Dryer Would Heat And Then Stop
I purchased a new heating element installed and stil had same problem. I order the 2 sensor (kit) located in same area and that took care of problem. I should have purcahsed all at same time like someone else told us in the website. Thanks parts select for the very fast delivery
Parts Used:
-
Terry from Snellville, GA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!